American Standard T506.430 User manual

American Standard
Brand
American Standard
Model
T506.430
Category
Faucets
Type
User manual

American Standard T506.430 is a diverter valve trim that is used with R420 or R430 rough valve bodies to control the flow of water between two or three different shower outlets. It is made of solid brass for durability and has a removable plaster guard to permit checking of valve installation prior to installing trim parts. The T506.430 is available in a variety of finishes to match your bathroom décor.

Here are some of the features and possible use cases for the American Standard T506.430:

  • Durability: The T506.430 is made of solid brass, which is a durable material that is ideal for prolonged contact with water.

American Standard T506.430 is a diverter valve trim that is used with R420 or R430 rough valve bodies to control the flow of water between two or three different shower outlets. It is made of solid brass for durability and has a removable plaster guard to permit checking of valve installation prior to installing trim parts. The T506.430 is available in a variety of finishes to match your bathroom décor.

Here are some of the features and possible use cases for the American Standard T506.430:

  • Durability: The T506.430 is made of solid brass, which is a durable material that is ideal for prolonged contact with water.
F79
© 2008 AS America Inc.
MOMENTS™
IN-WALL DIVERTER VALVES
Two-Way In-Wall Diverter. Less Handle.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
R420
Three-Way In-Wall Diverter. Less Handle.
R430
FLOW RATE - R420
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
0
2
4
6
8
10
12
14
16
Tub Port
Port A
80706050403020
GENERAL DESCRIPTION:
In-Wall Diverters: Rotational control alternates water flow
between two (R420) or three (R430) different shower outlets
(i.e. showerhead, handspray, body side spray or tub spout).
Forged brass valve body. Mixed water inlet and two (R420) or
three (R430) outlets are marked on back of valve body. 1/2"
NPT connections on mixed water inlet and two (R420) or three
(R430) outlets. Stamped brass escutcheon. Tub port with
increased water flow (see chart).
NOTE: Cannot be used as a shut-off valve.
PRODUCT FEATURES:
Solid Brass Construction: Durable, ideal material for
prolonged contact with water.
Removable Plaster Guard:
Permits checking of valve
installation prior to installing trim parts.
Choice of Finishes:
Wide range of durable finishes.
SUGGESTED SPECIFICATION
Two (three) way diverter shall feature a forged brass body with 1/2" NPT mixed water inlet and outlets. Fitting shall be
American Standard Model # T506.430.___ (Diverter Valve Trim) and R4_0. (Rough Valve Body).
FLOW RATE - R430
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
0
2
4
6
8
10
12
14
16
Tub Port
Port A/B
80706050403020
** ROUGHS AND TRIMS MUST BE ORDERED SEPARATELY.
MODEL NUMBER:
TRIM KITS:
T506.430 Diverter Valve Trim
Valve Trim ONLY. LESS Valve.
ROUGH VALVE BODIES:
R420 Two-Way In-Wall Diverter Valve Rough
1/2" NPT inlets/outlets. Less Handle.
R430 Three-Way In-Wall Diverter Valve Rough
1/2" NPT inlets/outlets. Less Handle.
NOTE:
Cannot be used as a shut-off valve.
T506.430 Diverter Valve Trim. Less valve.
Product
Number
Description
TRIM KITS**
Product
Number
Description
ROUGH VALVE
BODIES
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
70mm
(
2-5/8
)
ALL CONNECTIONS 1/2" NPT
FINISHED
WALL
FINISHED
WALL
41mm MIN.
(1-5/8)
66mm MAX.
(2-5/8)
71mm
(2-3/4)
57mm HOLE SIZE
(2-1/4)
Finish Options
PVD
Stainless
Steel
075
Polished
Chrome
002
F80
© 2008 AS America Inc.
MOMENTS™
IN-WALL DIVERTER VALVES
Two-Way In-Wall Diverter. Less Handle.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
R420
Three-Way In-Wall Diverter. Less Handle.
R430
FLOW RATE - R420
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
0
2
4
6
8
10
12
14
16
Tub Port
Port A
80706050403020
GENERAL DESCRIPTION:
In-Wall Diverters: Rotational control alternates water flow
between two (R420) or three (R430) different shower outlets
(i.e. showerhead, handspray, body side spray or tub spout).
Forged brass valve body. Mixed water inlet and two (R420) or
three (R430) outlets are marked on back of valve body. 1/2"
NPT connections on mixed water inlet and two (R420) or three
(R430) outlets. Stamped brass escutcheon. Tub port with
increased water flow (see chart).
NOTE: Cannot be used as a shut-off valve.
PRODUCT FEATURES:
Solid Brass Construction: Durable, ideal material for
prolonged contact with water.
Removable Plaster Guard:
Permits checking of valve
installation prior to installing trim parts.
Choice of Finishes:
Wide range of durable finishes.
SUGGESTED SPECIFICATION
Two (three) way diverter shall feature a forged brass body with 1/2" NPT mixed water inlet and outlets. Fitting shall be
American Standard Model # T506.430.___ (Diverter Valve Trim) and R4_0. (Rough Valve Body).
FLOW RATE - R430
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
0
2
4
6
8
10
12
14
16
Tub Port
Port A/B
80706050403020
** ROUGHS AND TRIMS MUST BE ORDERED SEPARATELY.
MODEL NUMBER:
TRIM KITS:
T506.430 Diverter Valve Trim
Valve Trim ONLY. LESS Valve.
ROUGH VALVE BODIES:
R420 Two-Way In-Wall Diverter Valve Rough
1/2" NPT inlets/outlets. Less Handle.
R430 Three-Way In-Wall Diverter Valve Rough
1/2" NPT inlets/outlets. Less Handle.
NOTE:
Cannot be used as a shut-off valve.
T506.430 Diverter Valve Trim. Less valve.
Product
Number
Description
TRIM KITS**
Product
Number
Description
ROUGH VALVE
BODIES
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
70mm
(
2-5/8
)
ALL CONNECTIONS 1/2" NPT
FINISHED
WALL
FINISHED
WALL
41mm MIN.
(1-5/8)
66mm MAX.
(2-5/8)
71mm
(2-3/4)
57mm HOLE SIZE
(2-1/4)
Finish Options
PVD
Stainless
Steel
075
Polished
Chrome
002
  • Page 1 1
  • Page 2 2

American Standard T506.430 User manual

American Standard
Brand
American Standard
Model
T506.430
Category
Faucets
Type
User manual

American Standard T506.430 is a diverter valve trim that is used with R420 or R430 rough valve bodies to control the flow of water between two or three different shower outlets. It is made of solid brass for durability and has a removable plaster guard to permit checking of valve installation prior to installing trim parts. The T506.430 is available in a variety of finishes to match your bathroom décor.

Here are some of the features and possible use cases for the American Standard T506.430:

  • Durability: The T506.430 is made of solid brass, which is a durable material that is ideal for prolonged contact with water.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents