Avaya Configuring LNM Services User manual

Category
Software manuals
Type
User manual
Part No. 303534-A Rev 00
October 1998
BayRS Version 13.00
Site Manager Software Version 7.00
Configuring LNM
Services
ii
303534-A Rev 00
4401 Great America Parkway 8 Federal Street
Santa Clara, CA 95054 Billerica, MA 01821
Copyright © 1998 Bay Networks, Inc.
All rights reserved. Printed in the USA. October 1998.
The information in this document is subject to change without notice. The statements, configurations, technical data,
and recommendations in this document are believed to be accurate and reliable, but are presented without express or
implied warranty. Users must take full responsibility for their applications of any products specified in this document.
The information in this document is proprietary to Bay Networks, Inc.
The software described in this document is furnished under a license agreement and may only be used in accordance
with the terms of that license. A summary of the Software License is included in this document.
Trademarks
ACE, AFN, AN, BCN, BLN, BN, BNX, CN, FRE, LN, Optivity, PPX, Quick2Config, and Bay Networks are
registered trademarks and Advanced Remote Node, ANH, ARN, ASN, BayRS, BaySecure, BayStack, BayStream,
BCC, BCNX, BLNX, EZ Install, EZ Internetwork, EZ LAN, FN, IPAutoLearn, PathMan, RouterMan, SN, SPEX,
Switch Node, System 5000, and the Bay Networks logo are trademarks of Bay Networks, Inc.
Microsoft, MS, MS-DOS, Win32, Windows, and Windows NT are registered trademarks of Microsoft Corporation.
All other trademarks and registered trademarks are the property of their respective owners.
Restricted Rights Legend
Use, duplication, or disclosure by the United States Government is subject to restrictions as set forth in subparagraph
(c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013.
Notwithstanding any other license agreement that may pertain to, or accompany the delivery of, this computer
software, the rights of the United States Government regarding its use, reproduction, and disclosure are as set forth in
the Commercial Computer Software-Restricted Rights clause at FAR 52.227-19.
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, Bay Networks, Inc. reserves the
right to make changes to the products described in this document without notice.
Bay Networks, Inc. does not assume any liability that may occur due to the use or application of the product(s) or
circuit layout(s) described herein.
Portions of the code in this software product may be Copyright © 1988, Regents of the University of California. All
rights reserved. Redistribution and use in source and binary forms of such portions are permitted, provided that the
above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising
materials, and other materials related to such distribution and use acknowledge that such portions of the software were
developed by the University of California, Berkeley. The name of the University may not be used to endorse or
promote products derived from such portions of the software without specific prior written permission.
SUCH PORTIONS OF THE SOFTWARE ARE PROVIDED “AS IS” AND WITHOUT ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
In addition, the program and information contained herein are licensed only pursuant to a license agreement that
contains restrictions on use and disclosure (that may incorporate by reference certain limitations and notices imposed
by third parties).
303534-A Rev 00
iii
Bay Networks, Inc. Software License Agreement
NOTICE: Please carefully read this license agreement before copying or using the accompanying software or
installing the hardware unit with pre-enabled software (each of which is referred to as “Software” in this Agreement).
BY COPYING OR USING THE SOFTWARE, YOU ACCEPT ALL OF THE TERMS AND CONDITIONS OF
THIS LICENSE AGREEMENT. THE TERMS EXPRESSED IN THIS AGREEMENT ARE THE ONLY TERMS
UNDER WHICH BAY NETWORKS WILL PERMIT YOU TO USE THE SOFTWARE. If you do not accept these
terms and conditions, return the product, unused and in the original shipping container, within 30 days of purchase to
obtain a credit for the full purchase price.
1. License Grant. Bay Networks, Inc. (“Bay Networks”) grants the end user of the Software (“Licensee”) a personal,
nonexclusive, nontransferable license: a) to use the Software either on a single computer or, if applicable, on a single
authorized device identified by host ID, for which it was originally acquired; b) to copy the Software solely for backup
purposes in support of authorized use of the Software; and c) to use and copy the associated user manual solely in
support of authorized use of the Software by Licensee. This license applies to the Software only and does not extend
to Bay Networks Agent software or other Bay Networks software products. Bay Networks Agent software or other
Bay Networks software products are licensed for use under the terms of the applicable Bay Networks, Inc. Software
License Agreement that accompanies such software and upon payment by the end user of the applicable license fees
for such software.
2. Restrictions on use; reservation of rights. The Software and user manuals are protected under copyright laws.
Bay Networks and/or its licensors retain all title and ownership in both the Software and user manuals, including any
revisions made by Bay Networks or its licensors. The copyright notice must be reproduced and included with any
copy of any portion of the Software or user manuals. Licensee may not modify, translate, decompile, disassemble, use
for any competitive analysis, reverse engineer, distribute, or create derivative works from the Software or user manuals
or any copy, in whole or in part. Except as expressly provided in this Agreement, Licensee may not copy or transfer
the Software or user manuals, in whole or in part. The Software and user manuals embody Bay Networks’ and its
licensors’ confidential and proprietary intellectual property. Licensee shall not sublicense, assign, or otherwise
disclose to any third party the Software, or any information about the operation, design, performance, or
implementation of the Software and user manuals that is confidential to Bay Networks and its licensors; however,
Licensee may grant permission to its consultants, subcontractors, and agents to use the Software at Licensee’s facility,
provided they have agreed to use the Software only in accordance with the terms of this license.
3. Limited warranty. Bay Networks warrants each item of Software, as delivered by Bay Networks and properly
installed and operated on Bay Networks hardware or other equipment it is originally licensed for, to function
substantially as described in its accompanying user manual during its warranty period, which begins on the date
Software is first shipped to Licensee. If any item of Software fails to so function during its warranty period, as the sole
remedy Bay Networks will at its discretion provide a suitable fix, patch, or workaround for the problem that may be
included in a future Software release. Bay Networks further warrants to Licensee that the media on which the
Software is provided will be free from defects in materials and workmanship under normal use for a period of 90 days
from the date Software is first shipped to Licensee. Bay Networks will replace defective media at no charge if it is
returned to Bay Networks during the warranty period along with proof of the date of shipment. This warranty does not
apply if the media has been damaged as a result of accident, misuse, or abuse. The Licensee assumes all responsibility
for selection of the Software to achieve Licensee’s intended results and for the installation, use, and results obtained
from the Software. Bay Networks does not warrant a) that the functions contained in the software will meet the
Licensee’s requirements, b) that the Software will operate in the hardware or software combinations that the Licensee
may select, c) that the operation of the Software will be uninterrupted or error free, or d) that all defects in the
operation of the Software will be corrected. Bay Networks is not obligated to remedy any Software defect that cannot
be reproduced with the latest Software release. These warranties do not apply to the Software if it has been (i) altered,
except by Bay Networks or in accordance with its instructions; (ii) used in conjunction with another vendor’s product,
resulting in the defect; or (iii) damaged by improper environment, abuse, misuse, accident, or negligence. THE
FOREGOING WARRANTIES AND LIMITATIONS ARE EXCLUSIVE REMEDIES AND ARE IN LIEU OF ALL
OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Licensee is responsible for the security of
iv
303534-A Rev 00
its own data and information and for maintaining adequate procedures apart from the Software to reconstruct lost or
altered files, data, or programs.
4. Limitation of liability. IN NO EVENT WILL BAY NETWORKS OR ITS LICENSORS BE LIABLE FOR ANY
COST OF SUBSTITUTE PROCUREMENT; SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES; OR ANY DAMAGES RESULTING FROM INACCURATE OR LOST DATA OR LOSS OF USE OR
PROFITS ARISING OUT OF OR IN CONNECTION WITH THE PERFORMANCE OF THE SOFTWARE, EVEN
IF BAY NETWORKS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT
SHALL THE LIABILITY OF BAY NETWORKS RELATING TO THE SOFTWARE OR THIS AGREEMENT
EXCEED THE PRICE PAID TO BAY NETWORKS FOR THE SOFTWARE LICENSE.
5. Government Licensees. This provision applies to all Software and documentation acquired directly or indirectly
by or on behalf of the United States Government. The Software and documentation are commercial products, licensed
on the open market at market prices, and were developed entirely at private expense and without the use of any U.S.
Government funds. The license to the U.S. Government is granted only with restricted rights, and use, duplication, or
disclosure by the U.S. Government is subject to the restrictions set forth in subparagraph (c)(1) of the Commercial
Computer Software––Restricted Rights clause of FAR 52.227-19 and the limitations set out in this license for civilian
agencies, and subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause of DFARS
252.227-7013, for agencies of the Department of Defense or their successors, whichever is applicable.
6. Use of Software in the European Community. This provision applies to all Software acquired for use within the
European Community. If Licensee uses the Software within a country in the European Community, the Software
Directive enacted by the Council of European Communities Directive dated 14 May, 1991, will apply to the
examination of the Software to facilitate interoperability. Licensee agrees to notify Bay Networks of any such
intended examination of the Software and may procure support and assistance from Bay Networks.
7. Term and termination. This license is effective until terminated; however, all of the restrictions with respect to
Bay Networks’ copyright in the Software and user manuals will cease being effective at the date of expiration of the
Bay Networks copyright; those restrictions relating to use and disclosure of Bay Networks’ confidential information
shall continue in effect. Licensee may terminate this license at any time. The license will automatically terminate if
Licensee fails to comply with any of the terms and conditions of the license. Upon termination for any reason,
Licensee will immediately destroy or return to Bay Networks the Software, user manuals, and all copies. Bay
Networks is not liable to Licensee for damages in any form solely by reason of the termination of this license.
8. Export and Re-export. Licensee agrees not to export, directly or indirectly, the Software or related technical data
or information without first obtaining any required export licenses or other governmental approvals. Without limiting
the foregoing, Licensee, on behalf of itself and its subsidiaries and affiliates, agrees that it will not, without first
obtaining all export licenses and approvals required by the U.S. Government: (i) export, re-export, transfer, or divert
any such Software or technical data, or any direct product thereof, to any country to which such exports or re-exports
are restricted or embargoed under United States export control laws and regulations, or to any national or resident of
such restricted or embargoed countries; or (ii) provide the Software or related technical data or information to any
military end user or for any military end use, including the design, development, or production of any chemical,
nuclear, or biological weapons.
9. General. If any provision of this Agreement is held to be invalid or unenforceable by a court of competent
jurisdiction, the remainder of the provisions of this Agreement shall remain in full force and effect. This Agreement
will be governed by the laws of the state of California.
Should you have any questions concerning this Agreement, contact Bay Networks, Inc., 4401 Great America
Parkway, P.O. Box 58185, Santa Clara, California 95054-8185.
LICENSEE ACKNOWLEDGES THAT LICENSEE HAS READ THIS AGREEMENT, UNDERSTANDS IT, AND
AGREES TO BE BOUND BY ITS TERMS AND CONDITIONS. LICENSEE FURTHER AGREES THAT THIS
AGREEMENT IS THE ENTIRE AND EXCLUSIVE AGREEMENT BETWEEN BAY NETWORKS AND
LICENSEE, WHICH SUPERSEDES ALL PRIOR ORAL AND WRITTEN AGREEMENTS AND
COMMUNICATIONS BETWEEN THE PARTIES PERTAINING TO THE SUBJECT MATTER OF THIS
AGREEMENT. NO DIFFERENT OR ADDITIONAL TERMS WILL BE ENFORCEABLE AGAINST BAY
NETWORKS UNLESS BAY NETWORKS GIVES ITS EXPRESS WRITTEN CONSENT, INCLUDING AN
EXPRESS WAIVER OF THE TERMS OF THIS AGREEMENT.
303534-A Rev 00
v
Contents
Preface
Before You Begin .............................................................................................................xiii
Text Conventions .............................................................................................................xiv
Acronyms ......................................................................................................................... xv
Bay Networks Technical Publications ..............................................................................xvi
How to Get Help .............................................................................................................xvii
Chapter 1
LNM Servers Overview
IBM LAN Network Manager ............................................................................................1-1
Local Services ..........................................................................................................1-3
Network-Wide Services ............................................................................................1-3
LAN Management Servers .............................................................................................1-3
LAN Reporting Mechanism (LRM) ...........................................................................1-6
Reporting Link Maintenance Function ...............................................................1-6
Control Function ................................................................................................1-7
Routing Function ...............................................................................................1-8
Notification Function ..........................................................................................1-8
Security Function ...............................................................................................1-9
Protocol Boundary Function ..............................................................................1-9
LLC Requirements .............................................................................................1-9
Ring Error Monitor (REM) ......................................................................................1-11
Hard-Error Processing Function ......................................................................1-11
Soft-Error Processing Function .......................................................................1-11
Ring Parameter Server (RPS) ................................................................................1-14
Status Request Function .................................................................................1-14
Ring Station Parameters Maintenance Function .............................................1-14
Registration Function .......................................................................................1-14
RPS Activation Function ..................................................................................1-15
vi
303534-A Rev 00
Configuration Report Server (CRS) .......................................................................1-15
Station Status Request Function .....................................................................1-15
Set Station Parameters Function .....................................................................1-16
Remove Station Function ................................................................................1-16
Notification Function ........................................................................................1-16
Communication Function .................................................................................1-16
LAN Bridge Server (LBS) .......................................................................................1-16
Status Request Function .................................................................................1-17
Set Parameters Function .................................................................................1-17
Notification Function ........................................................................................1-17
Bridge Performance Monitoring Function ........................................................1-17
For More Information About the LAN Management Servers ........................................1-18
Chapter 2
LNM Servers Implementation Notes
Initial Configuration .........................................................................................................2-1
Site Manager ............................................................................................................2-1
IBM LAN Network Manager .....................................................................................2-2
Internal MAC Address .......................................................................................2-4
External MAC Address ......................................................................................2-4
Using IBM LAN Net Manager to Set LNM Parameters ......................................2-5
Number of RPS Servers per Ring ..................................................................................2-6
Redundant Servers on a Ring ........................................................................................2-6
Passwords ......................................................................................................................2-6
Chapter 3
Enabling LNM Servers
Enabling LNM Servers on an Interface ...........................................................................3-1
Chapter 4
Editing LNM Servers Parameters
Accessing LNM Servers Parameters ..............................................................................4-2
Editing LNM Servers Global Parameters ........................................................................4-3
Editing LNM Servers Interface Parameters ....................................................................4-5
Deleting LNM Servers from a Circuit ............................................................................4-12
Deleting LNM Servers from the Bay Networks Node ....................................................4-12
303534-A Rev 00
vii
Appendix A
Site Manager Default Settings
Index
303534-A Rev 00
ix
Figures
Figure 1-1. LNM Servers ............................................................................................1-5
Figure 1-2. Controlling and Observing LAN Network Managers ................................1-8
Figure 1-3. Reporting Links via Multiplexed LLC2 Sessions ....................................1-10
Figure 2-1. Source Routing, LNM, and Line Parameters ...........................................2-3
Figure 4-1. Configuration Manager Window ...............................................................4-2
Figure 4-2. Edit LNM Global Parameters Window ......................................................4-3
Figure 4-3. LNM Interface Configuration Window ......................................................4-5
Figure 4-4. LNM Interface Configuration Window (Scrolled) ......................................4-6
303534-A Rev 00
xi
Tables
Table 1-1. MAC Sublayer Servers and Their Functional Addresses .........................1-4
Table A-1. LNM Global Parameters .......................................................................... A-1
Table A-2. LNM Servers Interface Parameters ........................................................A-1
303534-A Rev 00
xiii
Preface
This guide describes LNM services and what you do to start and customize LNM
services on a Bay Networks
®
router.
Before You Begin
Before using this guide, you must complete the following procedures. For a new
router:
Install the router (refer to the installation manual that came with your router).
Connect the router to the network and create a pilot configuration file (refer to
Quick-Starting Routers, Configuring BayStack Remote Access, or Connecting
ASN Routers to a Network).
Make sure that you are running the latest version of Bay Networks BayRS
and
Site Manager software. For information about upgrading BayRS and Site
Manager, see the upgrading guide for your version of BayRS.
Configuring LNM Services
xiv
303534-A Rev 00
Text Conventions
This guide uses the following text conventions:
angle brackets (< >) Indicate that you choose the text to enter based on the
description inside the brackets. Do not type the
brackets when entering the command.
Example: If the command syntax is:
ping
<ip_address>
, you enter:
ping
192.32.10.12
bold text
Indicates text that you need to enter and command
names and options.
Example: Enter
show ip
{
alerts
|
routes
}
Example: Use the
dinfo
command.
braces ({}) Indicate required elements in syntax descriptions
where there is more than one option. You must choose
only one of the options. Do not type the braces when
entering the command.
Example: If the command syntax is:
show ip
{
alerts
|
routes
}
, you must enter either:
show ip alerts
or
show ip routes
.
brackets ([ ]) Indicate optional elements in syntax descriptions. Do
not type the brackets when entering the command.
Example: If the command syntax is:
show ip interfaces
[
-alerts
]
, you can enter either:
show ip interfaces
or
show ip interfaces -alerts
.
ellipsis points (. . . ) Indicate that you repeat the last element of the
command as needed.
Example: If the command syntax is:
ethernet/2/1
[<
parameter> <value>
] . . .
, you enter
ethernet/2/1
and as many parameter-value pairs as
needed.
Preface
303534-A Rev 00
xv
Acronyms
italic text Indicates file and directory names, new terms, book
titles, and variables in command syntax descriptions.
Where a variable is two or more words, the words are
connected by an underscore.
Example: If the command syntax is:
show at
<
valid_route>
valid_route
is one variable and you substitute one value
for it.
screen text Indicates system output, for example, prompts and
system messages.
Example:
Set Bay Networks Trap Monitor Filters
separator ( > ) Shows menu paths.
Example: Protocols > IP identifies the IP option on the
Protocols menu.
vertical line (
|
) Separates choices for command keywords and
arguments. Enter only one of the choices. Do not type
the vertical line when entering the command.
Example: If the command syntax is:
show ip
{
alerts
|
routes
}
, you enter either:
show ip alerts
or
show ip routes
, but not both.
ASCII American Standard Code for Information Interchange
CRS Configuration Report Server
LAN local area network
LBS LAN Bridge Server
LLC Logical Link Control
LNM LAN Network Manager
LRM LAN Reporting Mechanism
MAC media access control
Configuring LNM Services
xvi
303534-A Rev 00
Bay Networks Technical Publications
You can now print Bay Networks technical manuals and release notes free,
directly from the Internet. Go to support.baynetworks.com/library/tpubs/. Find the
Bay Networks product for which you need documentation. Then locate the
specific category and model or version for your hardware or software product.
Using Adobe Acrobat Reader, you can open the manuals and release notes, search
for the sections you need, and print them on most standard printers. You can
download Acrobat Reader free from the Adobe Systems Web site,
www.adobe.com.
You can purchase Bay Networks documentation sets, CDs, and selected technical
publications through the Bay Networks Collateral Catalog. The catalog is located
on the World Wide Web at support.baynetworks.com/catalog.html and is divided
into sections arranged alphabetically:
The “CD ROMs” section lists available CDs.
The “Guides/Books” section lists books on technical topics.
The “Technical Manuals” section lists available printed documentation sets.
Make a note of the part numbers and prices of the items that you want to order.
Use the “Marketing Collateral Catalog description” link to place an order and to
print the order form.
MIB management information base
REM Ring Error Monitor
RPS Ring Parameter Server
WAN wide area network
Preface
303534-A Rev 00
xvii
How to Get Help
For product assistance, support contracts, or information about educational
services, go to the following URL:
http://www.baynetworks.com/corporate/contacts/
Or telephone the Bay Networks Technical Solutions Center at:
800-2LANWAN
303534-A Rev 00
1-1
Chapter 1
LNM Servers Overview
LNM Services are embodied in the LNM Servers program, the Bay Networks
implementation of the five LAN management servers described in the IBM Token
Ring Architecture Reference. The LNM Servers provide a means for an IBM LAN
Network Manager application to monitor and control stations attached to a locally
attached token ring LAN.
This chapter provides
A brief overview of the IBM LAN Network Manager (LNM) application
program
An overview of the Bay Networks LNM Servers
A list of additional technical resources
IBM LAN Network Manager
IBM LAN Network Manager is a PC application that allows a network
administrator to manage multisegment 802.5/token ring networks. The
administrator of a building or campus network can use IBM LAN Network
Manager to monitor a single LAN or a group of LANs.
Note:
Bay Networks system software does not support the use of IBM LAN
Network Manager to manage or monitor 802.3/Ethernet LAN segments or
adapters through a source routing-translating bridge.
Configuring LNM Services
1-2
303534-A Rev 00
IBM LAN Network Manager can also communicate with the IBM NetView
host-based network management product. This enables a NetView administrator
to gain access to certain operating capabilities of the IBM LAN Network Manager
application.
IBM LAN Network Manager provides facilities for managing the media and
adapters within a LAN, and for managing source routing bridges that interconnect
LAN segments.
When using an IBM LAN Network Manager workstation, a network administrator
can
Display alerts and recommended actions
Generate event log reports
Query, remove, or monitor adapters within the network
Establish a communications link with an IBM bridge for the purposes of LAN
management
Query and configure IBM bridges
Monitor token ring network status and errors
Perform token ring path tests and LAN segment tests
When accessing IBM LAN Network Manager via IBM NetView, a network
administrator can
Display IBM LAN Network Manager alerts and recommended actions
Generate IBM LAN Network Manager event log reports
Issue commands to IBM LAN Network Manager
Within a token ring LAN environment, IBM LAN Network Manager can access
two different levels of management:
Local services
Network-wide services
These services are provided by LNM Servers; see “LNM Management Servers,”
later in this chapter, for a discussion of servers.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62

Avaya Configuring LNM Services User manual

Category
Software manuals
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI