Cadillac 2008 Escalade EXT Navigation System Owner's Manual

Overview

........................................................ 1-1

Overview

.................................................. 1-2

Features and Controls

..................................... 2-1

Features and Controls

................................ 2-2

Navigation Audio System

................................ 3-1

Navigation Audio System

............................ 3-2

Voice Recognition

........................................... 4-1

Voice Recognition

...................................... 4-2

Phone

............................................................ 5-1

Phone

...................................................... 5-2

Index

................................................................ 1

2008 Cadillac Escalade/Escalade ESV and Escalade EXT

Navigation System

M

GENERAL MOTORS, GM, the GM Emblem, CADILLAC,

the CADILLAC Crest & Wreath, the names Escalade,

Escalade/ESV, and EXT are registered trademarks

of General Motors Corporation.

Dolby

®

is manufactured under license from Dolby

®

Laboratories. Dolby

®

and the double-D symbol

are trademarks of Dolby

®

Laboratories.

The information in this manual supplements the owner

manual. This manual includes the latest information

available at the time it was printed. We reserve the right

to make changes in the product after that time without

notice. For vehicles ﬁrst sold in Canada, substitute

the name General Motors of Canada Limited for Cadillac

Motor Car Division whenever it appears in this manual.

Keep this manual with the owner manual in the

vehicle, so it will be there if it is needed. If the vehicle is

sold, leave this manual in the vehicle.

Canadian Owners

A French language copy of this manual can be obtained

from your dealer/retailer or from:

Helm, Incorporated

P.O. Box 07130

Detroit, MI 48207

1-800-551-4123

www.helminc.com

Propriétaires Canadiens

On peut obtenir un exemplaire de ce guide en français

auprès de concessionnaire ou à l’adresse suivante:

Helm Incorporated

P.O. Box 07130

Detroit, MI 48207

1-800-551-4123

www.helminc.com

Litho in U.S.A.

Part No. 25833162 B Second Printing

©

ii

Overview .........................................................1-2

Navigation System Overview ............................1-2

Getting Started ...............................................1-4

Cleaning the Video Screen .............................1-11

Section 1 Overview

1-1

Overview

Navigation System Overview

Screen shown with Map Disc Inserted

1-2

A. FULL MAP Touch Screen Button. See “NAV” under

“Hard Keys” under Using the Navigation System

on page 2-2 for more information.

B. No GPS Symbol. See Symbols on page 2-7 for more

information.

C. North Up/Heading Up Symbol. See Symbols on

page 2-7 for more information.

D. Map Scale. See “Map Scales” under Maps on

page 2-4 for more information.

E.

0 (Zoom In) Touch Screen Button. See “Map

Scales” under Maps on page 2-4 for more

information.

F. Mark Touch Screen Button. See “Adding

Destinations to the Address Book” under Destination

on page 2-13 for more information.

G.

Z (DVD Map Disc Eject) Key. See Maps on

page 2-4 for more information.

H. Map DVD Slot. See “Installing the Map DVD” under

Maps on page 2-4 for information on how to

install and eject a map DVD.

I.

M (Load) Key. See CD Player on page 3-9 or DVD

Player on page 3-17 for more information.

J.

Z (CD/DVD Video/Audio Eject) Key. See CD

Player on page 3-9 or DVD Player on page 3-17 for

more information.

K. CD/DVD Video/Audio Slot. See CD Player on

page 3-9 or DVD Player on page 3-17 for more

information.

L.

O / n (Power/Volume) Knob. See Navigation

Audio System on page 3-2 for more information.

M.

m (Tilt) Key. See “Hard Keys” under Using the

Navigation System on page 2-2 for more information.

N. AUDIO Key. See Navigation Audio System on

page 3-2 for more information.

O. FAV (Favorite) Key. See “Storing Radio Station

Presets” under Navigation Audio System on page 3-2

for more information.

P.

5 (Phone) Key. See Phone on page 5-2 for more

information.

Q.

e (Sound) Key. See “Sound Menu” under

Navigation Audio System on page 3-2 for more

information.

R. Source (AM, FM, XM, CD, etc.) Touch Screen

Button. See Navigation Audio System on page 3-2

for more information.

S. Clock Touch Screen Button. See “Setting the Clock”

under Conﬁgure Menu on page 2-28 for more

information.

1-3

T. POI (Point of Interest) Touch Screen Button. See

“Displaying Points of Interest (POI) on the Map

Screen” under Symbols on page 2-7 for more

information.

U.

1 (Zoom Out) Touch Screen Button. See “Map

Scales” under Maps on page 2-4 for more

information.

V.

y©¨z(Seek) Key (Previous/Next). See

Navigation Audio System on page 3-2 for more

information.

W.

w (Tune) Knob. See Navigation Audio System

on page 3-2 for more information.

X. NAV (Navigation) Key. See “Hard Keys” under Using

the Navigation System on page 2-2 for more

information.

Y. RPT (Repeat) Key. See “Hard Keys” under Using

the Navigation System on page 2-2 for more

information.

Z. DEST (Destination) Key. See Destination on

page 2-13 for more information.

AA. CONFIG (Conﬁgure) Key. See Conﬁgure Menu on

page 2-28 for more information.

Getting Started

Before you begin to operate the navigation system, read

this manual thoroughly to become familiar with it and

to understand how the system works.

Any route suggestions made by this navigation system

may never override local traffic regulations, your

own judgement, and/or knowledge of safe driving

practices.

Disregard route suggestions made by the navigation

system if such suggestions would; cause you to perform

a hazardous or illegal maneuver, place you in a

hazardous situation, or route you into an area you

consider unsafe.

Keeping your mind on the drive is important for safe

driving. See “Defensive Driving” in the Index of

your vehicle’s owner manual for more information. Get

familiar with your vehicle’s navigation system so

you can use it with less effort and take full advantage of

its features. Your navigation system includes not only

navigation, but also audio functions. While your

vehicle is parked:

• Familiarize yourself with all of its controls: hard

keys on the faceplate and touch-sensitive screen

buttons.

• Familiarize yourself with its operation.

1-4

• Set up your audio by presetting your favorite

stations, setting the tone, and adjusting the

speakers. Then, when driving conditions permit, you

can tune to your favorite stations using the

presets and steering wheel controls.

• Set up the navigation features that can only be

done before you begin driving, such as entering

an address or a preset destination.

Entering a destination or alphanumeric text requires

many steps, so you can only perform these operations

when the vehicle is in PARK (P). You will notice

that touch-sensitive screen buttons leading to the

alphanumeric keyboard are dimmed out while driving.

Other functions may also be locked out while driving and

they too will appear grayed out on the screen — but

all functions are available when parked. Some functions

can be performed while driving, as long as you can

do so without diverting too much of your attention from

your driving.

{CAUTION:

This system provides you with a far greater

access to audio stations and song listings.

Giving extended attention to entertainment

tasks while driving can cause a crash and you

or others can be injured or killed. Always keep

your eyes on the road and your mind on the

drive — avoid engaging in extended searching

while driving.

{CAUTION:

Looking at the moving map on the navigation

screen frequently or for too long while driving

can cause a crash and you or others can be

injured or killed. Keep your eyes and mind on

the road and avoid looking too long or too

often at the moving map on the navigation

screen. Use the voice guidance directions

whenever possible.

1-5

The navigation system allows you to do the following:

• Plan a route with provided turn-by-turn route

and map guidance with voice prompts.

• Select a destination using various methods and

choices.

• Receive Radio Data System (RDS) broadcast

announcements.

You should always be alert and obey traffic and roadway

laws and instructions, regardless of the guidance from

the navigation system. The navigation system uses

street map information that does not include all traffic

restrictions or the latest road changes, it may suggest

using a road that is now closed for construction or a turn

that is prohibited by signs at the intersection. The

system uses limited information, you must always

evaluate whether following the system’s directions is

safe and legal for the current conditions.

Every ﬁfty times the vehicle is started and the navigation

system is turned on, the Caution screen will appear. If

the Caution screen appears, touch OK to load the

map DVD information. If OK is not selected, all hard

keys except for NAV (Navigation) and DEST

(Destination) can be accessed. Once the NAV or DEST

hard keys are pressed, this Caution screen will

appear and OK must be pressed to load the map DVD

information from the map disc.

When getting started you may set the navigation system

to your preference or delete information you may

have entered using various options. To do so, reference

the following topics.

1-6

Language — English/Metric

To change the language of the navigation screens, see

“Driver Information Center, DIC Vehicle Customization”

in the Index of your vehicles owner manual.

To change the navigation screens from English or

metric, see “Driver Information Center, DIC Operation

and Displays” in the Index of your vehicles owner

manual.

Deleting Personal Information

This navigation system can record and store personal

information such as names and addresses. At times,

such as when you are disposing of your vehicle,

you may want to delete this information. See “Edit

Address Book — Edit/View” under Conﬁgure Menu on

page 2-28 for deleting information from the

address book.

Storing Radio Station Presets

To set preset radio stations, do the following:

1. Press the

O (power) knob to turn the system on.

2. Press the AUDIO hard key and select the desired

band (AM, FM1, FM2, XM1, or XM2 (if equipped)).

3. Use the

w (tuning) knob or the SEEK arrows to

tune to the desired station.

4. Press and hold one of the ﬁve preset screen

buttons, at the bottom of the screen, until you hear a

beep or see the station displayed on the selected

preset button.

5. Repeat the steps for each preset.

See “Storing Radio Station Presets” under Navigation

Audio System on page 3-2 for more information.

Setting the Clock

The navigation system time and the analog clock are

separate features. Changing the time through the

navigation system will not change the time on the analog

clock and vice versa. See “Analog Clock” in the Index

of your vehicles owner manual to change the analog

clock time.

To set the time for the navigation system, do the

following:

1. Press the CONFIG key to enter the conﬁgure menu

options, then press the CONFIG key repeatedly

until the time is selected or touch the time screen

button.

2. Press the Hours and Minutes − (minus) and

+ (plus) signs to decrease or to increase the time.

See “Setting the Clock” under Conﬁgure Menu

on page 2-28 for more information.

1-7

Entering an Address and Point of

Interest, and Storing Preset

Destinations

Entering an Address

To enter a destination by inputting the city name ﬁrst,

do the following:

1. If the radio is already on with a map disc inserted,

skip to Step 5.

2. Press the

O (power) knob to turn the system on.

3. Insert the DVD map disc. See “Installing the

Map DVD” under Maps on page 2-4 for more

information.

4. A caution may appear. Touch the OK screen button

to proceed.

5. Press the DEST hard key.

6. Press the

2 Address Entry screen button.

7. Select the state/province screen button, if needed,

to change the current state or province. A list of all

of the available states and provinces will appear.

Select the state or province.

8. Once a state or province has been selected the

City name category will automatically be selected

for entry.

If ﬁve or less names are available, a list will display.

If more than ﬁve are available, the List screen

button will have a number in it, it represents the

number of available cities. Select this button to view

the list and select a city.

9. Once a city has been selected the Street name

category will automatically be selected for entry.

If ﬁve or less streets are available for the selected

city, the system will display the list of streets. If

more than ﬁve streets are available the system will

display the alpha keyboard. Start entering the

street name. If ﬁve or less names are available, a

list will display. If more than ﬁve are available,

the List screen button will have a number in it, it

represents the number of available streets. Select

this button to view the list and select a street.

10. Once a street has been selected, select the

House # screen button to enter the house number.

The system will display the house number range

that is available for the street.

11. Select the Go screen button. A map screen, with

the destination marked, will appear.

12. Select the route preference (Fastest, Shortest,

or Other). The system will calculate and highlight

the route.

13. Select the Start Guidance screen button. You are

now ready to start your route.

1-8

See “Address Entry ” under Destination on page 2-13

for more information.

Entering a Point of Interest (POI)

To set a destination by entering a Point of Interest

(POI), do the following:

1. If the radio is already on with a map disc inserted,

skip to Step 5.

2. Press the

O (power) knob to turn the system on.

3. Insert the DVD map disc. See “Installing the

Map DVD” under Maps on page 2-4 for more

information.

4. A caution may appear. Touch the OK screen button

to proceed.

5. Press the DEST hard key.

6. Press the

i Point of Interest screen button.

7. Select the state/province screen button, if needed,

to change the current state or province. A list of all

of the available states and provinces will appear.

Select the state or province.

8. Enter the speciﬁc title of the POI in the POI name

space (e.g. Washington Monument).

If ﬁve or less names are available, a list will display.

If more than ﬁve are available, the List screen button

will have a number in it, it represents the number of

available POIs. Select this button to view the list.

9. Select the Go screen button next to the POI. A map

screen, with the destination marked, will appear.

10. Select the route preference (Fastest, Shortest, or

Other). The system will calculate and highlight the

route.

11. Select the Start Guidance screen button. You are

now ready to start your route.

See “Point of Interest (POI)” under Destination on

page 2-13 for more information.

Storing Preset Destinations

1. If the radio is already on with a map disc inserted,

skip to Step 5.

2. Press the

O (power) knob to turn the system on.

3. Insert the DVD map disc. See “Installing the

Map DVD” under Maps on page 2-4 for more

information.

4. A caution may appear. Touch the OK screen button

to proceed.

5. Press the DEST hard key.

Enter a destination. See Destination on page 2-13

for more information on how to enter a destination.

1-9

6. Press the DEST hard key, the Route screen will

display. Press the Final Destination or Stopover

screen button. The information screen will display

for that location. Press the Add to Address Book

screen button. The address book screen will appear.

7. Select the Name screen button. An alpha-keyboard

will display. Enter the name. Select the Back screen

button.

8. Press and hold one of the screen buttons at the

bottom of the screen until the name appears in

the screen button on the display.

The name will appear in that preset destination

screen button and is now available to select from

the Destination Entry screen. See “Using Your

Stored Preset Destinations” next in this section to

select it as a destination.

See “Adding or Changing Preset Destinations”

under Destination on page 2-13 for more information

on how to add preset destinations.

Using Your Stored Preset Destinations

These destinations are available for selection while

driving.

1. If the radio is already on with a map disc inserted,

skip to Step 5.

2. Press the

O (power) knob to turn the system on.

3. Insert the DVD map disc. See “Installing the

Map DVD” under Maps on page 2-4 for more

information.

4. A caution may appear. Touch the OK screen button

to proceed.

5. Press the DEST hard key.

6. Select one of the available preset destination

screen buttons. A map screen, with the destination

marked, will appear.

7. Select the route preference (Fastest, Shortest,

or Other). The system will calculate and highlight

the route.

8. Select the Start Guidance screen button. You are

now ready to start your route.

See “Preset Destination” under Destination on page 2-13

for more information.

1-10

Canceling Guidance

Guidance will be canceled once you arrive at your ﬁnal

destination. To cancel guidance prior to arrival at the

ﬁnal destination, do the following:

1. Press the DEST hard key.

2. Press the Cancel Guidance screen button.

3. Press OK to conﬁrm.

Guidance Volume

To adjust the volume of voice guidance prompts, do the

following:

1. Press the CONFIG hard key to enter the menu

options, then press the CONFIG key repeatedly

until Nav is selected or touch the Nav screen button.

2. Press the Voice Prompt screen button.

3. Press the + (plus) or – (minus) screen buttons to

increase or to decrease the volume of the voice

prompts. The system will respond with the adjusted

voice level.

See “Voice Prompt ” under Conﬁgure Menu on

page 2-28 for more information.

Cleaning the Video Screen

When cleaning the video screen, use only a soft clean

cotton cloth dampened with clean water.

1-11

✍ NOTES

1-12

Features and Controls ......................................2-2

Using the Navigation System ...........................2-2

Maps ............................................................2-4

Symbols ........................................................2-7

Destination ..................................................2-13

Conﬁgure Menu ............................................2-28

Rear Vision Camera ......................................2-34

Global Positioning System (GPS) ....................2-38

Vehicle Positioning ........................................2-38

Problems with Route Guidance .......................2-39

If the System Needs Service ..........................2-40

Ordering Map DVDs ......................................2-40

Database Coverage Explanations ....................2-40

Section 2 Features and Controls

2-1

Features and Controls

Using the Navigation System

This section presents basic information needed to

operate the navigation system.

Use the hard keys located on the navigation system

along with the available touch-sensitive screen buttons

on the navigation screen to operate the system.

See Navigation System Overview on page 1-2 for more

information.

Once the vehicle is moving, various functions will be

disabled to reduce driver distractions.

Hard Keys

The following hard keys are located on the navigation

system:

O / n (Power/Volume): Press this knob to turn the

system on and off. Turn the knob to increase or

decrease the volume to the audio system.

Press and hold this knob for more than two seconds

to turn off the navigation system, the Rear Seat

Entertainment (RSE), and Rear Seat Audio (RSA). If the

vehicle has not been tuned off, the RSE and the RSA

can be turned back on by pressing this knob and

will continue play of the last active source.

w (Tune): Turn the tune knob to go to the next or

previous radio station or disc track or chapter. See

Navigation Audio System on page 3-2, CD Player on

page 3-9,orDVD Player on page 3-17 for more

information.

Z (DVD Map Disc Eject): Press the eject button,

located next to the upper disc slot, to eject the DVD map

disc. See Maps on page 2-4 for more information.

M (Load): Press the load button to load CDs or

audio/video DVDs. See CD Player on page 3-9 or DVD

Player on page 3-17 for more information.

Z (CD/DVD Eject): Press the eject button, located

under the load button, to eject CDs or audio/video

DVDs. See CD Player on page 3-9 or DVD Player on

page 3-17 for more information.

m (Tilt): Press this key up or down to tilt the screen.

AUDIO: Press this key to access the full Audio screen

to change AM, FM, XM™ Satellite Radio Service

(if equipped), CD/DVD, and auxiliary input. See “Audio”

under Navigation Audio System on page 3-2 for more

information.

FAV (Favorite): Press this key to access the preset

stations. See “Storing Radio Station Presets” under

Navigation Audio System on page 3-2 for more

information.

2-2

5 (Phone): Press this key to access calling through

OnStar

®

. See Phone on page 5-2 for more information.

See “OnStar

®

System” in the Index of your vehicle’s

owner manual for more information.

e (Sound): Press this key to access the Sound

screen to adjust bass, midrange, treble, and Digital

Signal Processing (DSP). See “Sound Menu” under

Navigation Audio System on page 3-2 for more

information.

DEST (Destination): Press this key to access the

Destination Entry screen to plan a destination.

See Destination on page 2-13 for more information.

CONFIG (Conﬁgure Menu): Press this key to adjust

features for sound, radio, navigation, and the display.

See Conﬁgure Menu on page 2-28 for more information.

NAV (Navigation): Press this key to view your

vehicle’s current position on the map screen. Each

press of this key will cycle through Full Map and the tab

that displays the current audio source (AM, FM, CD,

etc.). Full Map displays the screen in full map view.

Selecting the audio tab will split the screen between the

map screen and the current audio source screen

menu. See “Audio” under Navigation Audio System on

page 3-2 for more information.

RPT (Navigation Repeat): Press this key to repeat the

last voice guidance prompt.

and scan radio stations, to seek tracks on a CD, and to

seek chapters on a DVD. See Navigation Audio

System on page 3-2, CD Player on page 3-9,orDVD

Player on page 3-17 for more information.

Touch-Sensitive Screen Buttons

Touch-sensitive screen buttons are located on the

screen. When a screen button has been selected, a

beep will sound. Screen buttons are highlighted when

a feature is available.

Alpha-Numeric Keyboard

Letters of the alphabet, symbols, punctuation, and

numbers, when available, will display on the navigation

screen as an alpha or numeric keyboard. The alpha

keyboard will display when the system requires entry of

a city or street name.

All characters are touch-sensitive screen buttons. Touch

a character to select it.

A-Y (Accent Alphabet): Select this screen button to

select letters with accent symbols. This button may

toggle to A-Z.

A-Z (Alphabet): Select this screen button to select

letters from the alphabet. This button may toggle to A-Y.

2-3

0-9 (Numbers): Select this screen button to select

numbers.

U (Space): Select the space screen button to enter

a space between characters or the words of a name.

Backspace: Select this screen button if an incorrect

character has been selected.

To make name selections easier, the system will only

highlight the characters that can follow the last one

entered. For example, if a Z is entered, a T may not be

available for selection.

If a name is not display after entry, it may need to be

entered differently or the map DVD disc may not contain

that information. See Database Coverage Explanations

on page 2-40 for more information.

Maps

This section includes basic information that you need to

know about the map database.

The maps are stored on a DVD. The United States,

Canada, and Puerto Rico are contained on one disc.

Detailed Areas

Road network attributes are contained in the map

database for detailed areas. Attributes include

information such as street names, street address, turn

restrictions, etc. A detailed area will include all major

highways, service roads, and residential roads.

The detailed areas include points of interest (POI) such

as: restaurants, airports, banks, hospitals, police

stations, gas stations, tourist attractions, historical

monuments, etc. The map database may not include

data for newly constructed areas or map database

corrections that are completed after the production of

the disc. The navigation system will provide full

route guidance in the detailed map areas.

Limited Guidance Areas

Any area that is not classiﬁed as detailed is a limited

guidance area. Limited guidance streets will be

displayed on the map display but route guidance may

not be given on these streets. Some POI categories,

such as the city center POI category, and some street

addresses are included in the limited guidance areas.

The navigation system will inform you by voice prompts

when you are traveling into a limited guidance area

where route guidance will not be available. The street

maps and the directional arrow displayed on the

navigation system can then be used to determine the

remaining route to your destination.

2-4

Installing the DVD Map Disc

Your dealer/retailer may have installed the map DVD. If

the map DVD was not installed, do the following to load it:

1. Turn the ignition on.

2. Press the

O (power) knob to turn the navigation

system on.

3. Load the map DVD partway into the slot located

just below the screen. The system will pull it in.

4. If the Caution screen appears, touch the OK screen

button to agree.

DVD Map Disc Messages

If Disc Read Error appears on the display and/or the

map disc comes out, it could be for one of the following

reasons:

• If the map disc was installed into the CD slot. See

“Installing the DVD Map Disc” previously.

• It is very hot, when the temperature returns to

normal, the map disc should play.

• You are driving on a very rough road. When the road

becomes smoother, the map disc should play.

• The map disc is dirty, scratched, wet, or

upside down.

If any error occurs repeatedly or if an error cannot be

corrected, contact your dealer/retailer.

Ejecting the DVD Map Disc

Z

(DVD Map Disc Eject): Press the eject button,

located next to the upper disc slot, to eject the DVD

map disc.

Handling the DVD Map Disc

When handling the DVD map disc, be careful of the

following:

• Handle the disc very carefully to avoid

contamination or ﬂaws. Signals may not read out

properly if the disc gets contaminated or ﬂawed.

• If the disc gets soiled, use a soft cloth to gently wipe

it out from the center of the disc to the outside. Do

not use photographic record cleaner, solvents,

or other cleaners.

• Do not use the disc to rest on while writing or

drawing using any writing utensil or attach a seal to

any of the sides or the disc.

• Do not keep the disc in direct sunlight, high

temperatures, or humidity.

• After using the disc, place it back into the

original case.

2-5

Map Adjustments

The system allows you to adjust the scale of view on

the map. Also, as you drive, the map will scroll

automatically based on the direction of travel.

Map Scales

+/− (Zoom In/Zoom Out): Touch the zoom in or out

screen buttons or the scale on the bar to change

the level of map detail. The scale will appear on the

screen once the zoom in or zoom out screen buttons are

selected. The system will adjust the map accordingly.

The scale of a map can range from 1/32 mi. (50 m)

to 256 mi. (400 km). To change English or metric, see

“Driver Information Center, DIC Operation and Displays”

in the Index of your vehicle’s owner manual.

Scrolling the Map

Touch anywhere on the

map screen and the scroll

symbol will appear.

Use this feature to scroll

across the map.

Move your ﬁnger in any direction on the map screen

and the map will continue to scroll in that direction until

you remove your ﬁnger.

If scrolling while your vehicle is in PARK (P), the system

will scroll initially at a slower rate. It will increase if

you continue touching the map screen.

If scrolling while your vehicle is in motion, you have

one scroll speed and a limited distance to scroll.

You have to keep touching the map screen to scroll for

a longer distance.

If you have used the scroll feature to scroll the map

and your vehicle icon becomes lost, press the NAV

(Navigation) key to return to the current vehicle location

on the map.

You can use the scroll feature on the map to set a

destination. See “From Map” under Destination

on page 2-13 for more information.

When scrolling on the map without a planned route,

press the GO screen button to calculate the route from

your current position to the destination mark.

2-6

Page is loading ...

Cadillac 2008 Escalade EXT Navigation System Owner's Manual

This manual is also suitable for

Cadillac 2008 Escalade EXT Navigation System Owner's Manual

Related papers

Other documents