JVC AV 56WP94 User manual

Brand: JVC

Model: AV 56WP94

Category: LCD TVs

Type: User manual

This manual is also suitable for

AV-65WP94

Important Note:

In the spaces below, enter the model and serial number of your television (located

at the rear of the television cabinet). Staple your sales receipt or invoice to the

inside cover of this guide. Keep this user’s guide in a convenient place for future

reference. Keep the carton and original packaging for future use.

LCT1468-001B-A

1003-TN-II-IM

Model Number:

Serial Number:

Illustration of AV-56WP94 and RM-C12G

For Models:

AV-65WP94

AV-56WP94

Projection Television Users Guide

AV-56\65WP941 English 1 10/17/03, 1:02:45 PM

Important Safety Precautions

WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS TV

SET TO RAIN OR MOISTURE.

CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES

REGARDING THE USE OF THIS UNIT.

1. Operate only from the power source specified on the unit.

2. Avoid damaging the AC plug and power cord.

3. Avoid Improper installation and never position the unit where good

ventilation is unattainable.

4. Do not allow objects or liquid into the cabinet openings.

5. In the event of trouble, unplug the unit and call a service technician. Do

not attempt to repair it yourself or remove the rear cover.

Changes or modifications not approved by JVC could void the warranty.

• When you don’t use this TV set for a long period of time, be sure to

disconnect both the power plug from the AC outlet and antenna for your

safety.

• To prevent electric shock do not use this polarized plug with an extension

cord, receptacle or other outlet unless the blades can be fully inserted to

prevent blade exposure.

CAUTION: To reduce the risk of electric shock. Do not remove

cover (or back). No user serviceable parts inside.

Refer servicing to qualified service personnel.

The lightning flash with arrowhead symbol, within

an equilateral triangle is intended to alert the user

to the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

IMPORTANT RECYCLING INFORMATION

This product utilizes both a Cathode Ray Tube (CRT) and other components that

contain lead. Disposal of these materials may be regulated in your community due to

environmental considerations. For disposal or recycling information, please contact

your local authorities, or the Electronic Industries Alliance: http://www.eiae.org

AV-56\65WP941 English 2 10/17/03, 1:02:47 PM

CAUTION:

Please read and retain for your safety.

Electrical energy can perform many useful functions. This TV set has been engineered and

manufactured to assure your personal safety. But improper use can result in potential

electrical shock or fire hazards. In order not to defeat the safeguards incorporated in this

TV set, observe the following basic rules for its installation, use and servicing. Also follow all

warnings and instructions marked on your TV set.

INSTALLATION

1 Your TV set is equipped with a polarized AC line plug (one

blade of the plug is wider than the other). This safety feature

allows the plug to fit into the power outlet only one way.

Should you be unable to insert the plug fully into the outlet,

try reversing the plug. Should it still fail to fit, contact your

electrician.

2 Operate the TV set only from a power source as indicated on the TV set or refer to the

operating instructions for this information. If you are not sure of the type of power supply to

your home, consult your TV set dealer or local power company. For battery operation, refer

to the operating instructions.

3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords

and broken plugs. They may result in a shock or fire hazard. Call your service technician for

replacement.

4 Do not allow anything to rest on or roll over the power cord, and do not place the TV set

where power cord is subject to traffic or abuse. This may result in a shock or fire hazard.

5 Do not use this TV set near water — for example, near a bathtub, washbowl, kitchen sink, or

laundry tub, in a wet basement, or near swimming pool, etc.

6 If an outside antenna is connected to the TV set, be sure the antenna system is grounded

so as to provide some protection against voltage surges and built-up static charges.

Section 810 of the National Electrical Code provides information with respect to proper

grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna

discharge unit, size of grounding conductors, location of antenna discharge unit, connection

requirements for the grounding electrode.

(POLARIZED-TYPE)

Important Safeguards

• As an “ENERGY STAR

” partner,

JVC has determined that this

product or product model meets the

“ENERGY STAR

” guidelines for energy

efficiency.

AV-56\65WP941 English 3 10/17/03, 1:02:47 PM

7 An outside antenna system should not be located in the vicinity of overhead power lines

or other electric light or power circuits, or where it can fall into such power lines or circuits.

When installing an outside antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them might be fatal.

8 TV sets are provided with ventilation openings in the cabinet to allow heat generated during

operation to be released.

Therefore:

— Never block the bottom ventilation slots of a portable TV set by placing it on a bed, sofa,

rug, etc.

— Never place a TV set in a “built-in” enclosure unless proper ventilation is provided.

— Never cover the openings with a cloth or other material.

— Never place the TV set near or over a radiator or heat register.

9 To avoid personal injury:

— Do not place a TV set on a sloping shelf unless properly secured.

— Use only a cart or stand recommended by the TV set manufacturer.

— Do not try to roll a cart with small casters across thresholds or deep pile carpets.

— Wall or shelf mounting should follow the manufacturer’s instructions, and should use a

mounting kit approved by the manufacturer.

10 Caution children about dropping or pushing objects into the TV set through cabinet

openings. Some internal parts carry hazardous voltages and contact can result in a fire or

electrical shock.

11 Unplug the TV set from the wall outlet before cleaning. Do not use liquid or an aerosol

cleaner.

12 Never add accessories to a TV set that has not been designed for this purpose. Such

additions may result in a hazard.

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

Use

GROUND

CLAMP

ELECTRICAL

SERVICE

EQUIPMENT

NEC - NATIONAL ELECTRIC CODE

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ARTICLE 250, PART H)

AV-56\65WP941 English 4 10/17/03, 1:02:48 PM

13 For added protection of the TV set during a lightning storm or when the TV set is to be left

unattended for an extended period of time, unplug it from the wall outlet and disconnect the

antenna. This will prevent damage to product due to lightning storms or power line surges.

14 A TV set and cart combination should be moved with care. Quick stops, excessive force,

and uneven surfaces may cause the TV set and cart combination to overturn.

15 Unplug this TV set from the wall outlet and refer servicing to qualified service personnel

under the following conditions:

A. When the power cord or plug is damaged or frayed.

B. If liquid has been spilled into the TV set.

C. If the TV set has been exposed to rain or water.

D. If the TV set does not operate normally by following the operating instructions. Adjust

only those controls that are covered in the operating instructions as improper adjustment

of other controls may result in damage and will often require extensive work by a

qualified technician to restore the TV set to normal operation.

E. If the TV set has been dropped or damaged in any way.

F. When the TV set exhibits a distinct change in performance — this indicates a need for

service.

16 Do not attempt to service this TV set yourself as opening or removing covers may

expose you to dangerous voltage or other hazards. Refer all servicing to qualified service

personnel.

17 When replacement parts are required, have the service technician verify in writing that the

replacement parts he uses have the same safety characteristics as the original parts. Use

of manufacturer’s specified replacement parts can prevent fire, shock, or other hazards.

18 Upon completion of any service or repairs to this TV set, please ask the service technician

to perform the safety check described in the manufacturer’s service literature.

19 When a TV set reaches the end of its useful life, improper disposal could result in a picture

tube implosion. Ask a qualified service technician to dispose of the TV set.

20 Note to CATV system installer.

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of

the NEC that provides guidelines for proper grounding and, in particular, specifies that the

cable ground shall be connected to the grounding system of the building, as close to the

point of cable entry as practical.

PORTABLE CART WARNING

(Symbol provided by RETAC)

Service

AV-56\65WP941 English 5 10/17/03, 1:02:48 PM

Warnings

By displaying ﬁ xed images for extended periods of time, can leave a subtle but permanent ghost

image in your picture. This is referred to as "burn-in". To avoid this, mix your viewing pattern.

Examples include, but are not limited to the following:

• Stock-market report bars

• Shopping channel logos and pricing displays

• Video game patterns or scoreboards

• Bright station logos

• Internet web sites or other computer-style

images.

• DVD discs, video tapes, laser discs

• Broadcast, cable, satellite channels or digital

television tuners/converters.

Caring for the Cabinet

Caring for the Screen

Screen Burn-in

Note: Warranty DOES NOT cover screen

burn-in or uneven picture tube aging.

XYZ XYZ

TV on TV off

Normally, light dusting with a soft, non-scratching duster will keep your TV clean.

If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly

moistened with water. You can add a few drops of mild liquid detergent to the water to help

remove spots of oily dirt.

• DO NOT allow liquid to enter the TV through the ventilation slots.

• DO NOT use strong or abrasive cleaners on the TV.

• DO NOT spray liquids or cleaners directly on the TV’s surface.

• DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.

The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a

soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner

and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.

Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen.

These will remove the coating layer and cause discolorations.

Do not push or hit the screen. This could cause scratches on the screen surface and image

distortions.

For example...

AV-56\65WP941 English 6 10/17/03, 1:02:48 PM

Table of Contents

Unpacking your TV . . . . . . . . . . . . 8

TV Models . . . . . . . . . . . . . . . . 10

TV Remote Control . . . . . . . . . . . 11

Getting Started . . . . . . . . . . . . . 12

The Remote Control . . . . . . . . . . 12

Connecting Your Devices . . . . . . . 13

Interactive Plug In Menu . . . . . . . . 23

Setting CATV, VCR and DVD Codes . . . 26

CATV or Satellite Codes . . . . . . . . 26

VCR Codes . . . . . . . . . . . . . . 27

DVD Codes . . . . . . . . . . . . . . 28

Search Codes . . . . . . . . . . . . . 29

Using the Guide . . . . . . . . . . . . . 30

Onscreen Menu System . . . . . . . . . 31

Auto Tuner Setup . . . . . . . . . . . . 33

Channel Summary . . . . . . . . . . . . 33

V-Chip . . . . . . . . . . . . . . . . . . 34

Set Lock Code . . . . . . . . . . . . . 40

Adjusting CRT Color Conversion . . . . . 41

Auto Demo . . . . . . . . . . . . . . . 43

Language . . . . . . . . . . . . . . . . 43

Closed Caption . . . . . . . . . . . . . 44

Auto Shut Off . . . . . . . . . . . . . . 46

XDS ID . . . . . . . . . . . . . . . . . 46

ATSC Monitor Out . . . . . . . . . . . . . 47

Noise Muting . . . . . . . . . . . . . . 47

Front Panel Lock . . . . . . . . . . . . 48

V1 Smart Input . . . . . . . . . . . 48

Position Adjustment . . . . . . . . . . . 49

Power Indicator . . . . . . . . . . . . . 49

TV Speaker . . . . . . . . . . . . 50

Audio Out . . . . . . . . . . . . . . . . 50

Center CH Input . . . . . . . . . . . . . 50

ATSC Sound . . . . . . . . . . . . . . 51

Digital-In . . . . . . . . . . . . . . . . . 51

Picture Settings . . . . . . . . . . . . . 52

Adjust Picture Settings . . . . . . . . . 52

Color Temperature . . . . . . . . . . . . 53

Digital Noise Clear . . . . . . . . . . . . 53

VSM . . . . . . . . . . . . . . . . . . . 53

Natural Cinema . . . . . . . . . . . . . 54

Reset . . . . . . . . . . . . . . . . . . 54

Set Clock . . . . . . . . . . . . . . . . 57

On/Off Timer . . . . . . . . . . . . . . . 58

Multi Screen Function . . . . . . . . . . 59

Split . . . . . . . . . . . . . . . . . . . 59

Index . . . . . . . . . . . . . . . . . . 60

Freeze . . . . . . . . . . . . . . . . . . 60

Swap . . . . . . . . . . . . . . . . . 60

Select . . . . . . . . . . . . . . . . . . 60

Power . . . . . . . . . . . . . . . . . . 61

Number Buttons . . . . . . . . . . . . . 61

100+ Button . . . . . . . . . . . . . . . 61

Input . . . . . . . . . . . . . . . . . . . 61

Digital-In . . . . . . . . . . . . . . . . . 61

Channel +/- . . . . . . . . . . . . . 61

Volume +/- . . . . . . . . . . . . . 62

Return +/TV . . . . . . . . . . . . . . . 62

Muting . . . . . . . . . . . . . . . . . . 62

Menu . . . . . . . . . . . . . . . . . . 62

OK . . . . . . . . . . . . . . . . . . . 62

Back . . . . . . . . . . . . . . . . . . . 62

Video Status . . . . . . . . . . . . . . . 63

TheaterPro D6500K . . . . . . . . . . . 63

Sleep Timer . . . . . . . . . . . . . . . 63

Display . . . . . . . . . . . . . . . . . 64

Aspect . . . . . . . . . . . . . . . . . 65

Aspect Ratios . . . . . . . . . . . . . 66

ML/MTS . . . . . . . . . . . . . . . . . . 66

TV/CATV Slide Switch . . . . . . . . . . 67

VCR/DVD Slide Switch . . . . . . . . . 67

VCR Buttons . . . . . . . . . . . . . . . 67

DVD Buttons . . . . . . . . . . . . . . . 67

Light . . . . . . . . . . . . . . . . . . . 67

Super Focus . . . . . . . . . . . . . . . 67

Digital CH (DCS) . . . . . . . . . . . . . . 68

Sub Channel +/– . . . . . . . . . . . . . 68

iLINK/Timer . . . . . . . . . . . . . . . . . 69

EPG . . . . . . . . . . . . . . . . . 73

OSD Warning . . . . . . . . . . . . . . 76

Troubleshooting . . . . . . . . . . . . . 77

Warranty . . . . . . . . . . . . . . . . . 79

Authorized Service Centers . . . . . . . 81

Specifications . . . . . . . . . . . . . 82

Notes . . . . . . . . . . . . . . . 83

Quick Setup . . . . . . . . . . . 8

Remote Programming . . . . . 26

Onscreen Menus . . . . . . . . 30

Button Functions . . . . . . . 59

Initial Setup . . . . . . . . . . 33

Clock Timers . . . . . . . . . . 57

Picture Adjust . . . . . . . . . 52

Sound Settings . . . . . . . . . . . . . 55

Adjust Sound Settings . . . . . . . . . 55

Reset . . . . . . . . . . . . . . . 55

A.H.S . . . . . . . . . . . . . . . 56

BBE . . . . . . . . . . . . . . . 56

Button Functions - Digital . . . 68

Appendices . . . . . . . . . . 76

Sound Adjust . . . . . . . . . 55

AV-56\65WP941 English 7 10/17/03, 1:02:49 PM

Two AA

Batteries

1 Television

1 Remote Control

Used to connect an external

antenna or cable TV system to your

TV.

Note: Your television

and/or remote

control may differ

from the examples

illustrated here.

Quick Setup Unpacking your TV

Thank you for your purchase of a JVC Color Television. Before you begin setting up your new

television, please check to make sure you have all of the following items. In addition to this

guide, your television box should include:

Once you have unpacked your television, the next step is to connect it to your antenna/

cable or satellite system and to connect the audio/video devices you want to use with your

television. To make these connections you will use plugs like the ones illustrated below.

Coaxial Cables

Used to connect audio/video

devices like VCRs, DVD players,

stereo amplifiers, game consoles,

etc.

Component Cables

Composite Cables

Audio Cables

INPUT 1

INDEX

FREEZE

SWAP

SELECT SLEEP

RETURN+

INPUT 2

INPUT 3

INPUT 4

DIGITAL-IN

THEATER

PRO

DIGITAL

VIDEO

STATUS

iLINK/TIMER

– SUB CHANNEL +

LIGHT

CATV VCR DVD

MUTING

BACK

EPG

RM-C12G

REW

VCR CHANNEL

PREV NEXT

VCR / DVD

POWER

TV / VCR

FFPLAY

REC PAUSE

OPEN CLOSE

STILL PAUSE

STOP

VOL VOL

MULTI SCREEN

SPLIT

ML/MTS

D-IN

123

456

789

100+

POWER

DISPLAY

DCS

–

ASPECT

I'Art

PRO

PULL OPEN

POWER

HDTV

Intergraded

AA Alkaline

Used to make video connections

with S-Video VCRs, Camcorders

and DVD players.

S-Video Cable

(continued...)

AV-56\65WP941 English 8 10/17/03, 1:02:49 PM

Quick Setup Unpacking your TV

We recommend that before you start using your new television, you read your entire User’s

Guide so you can learn about your new television’s many great features. If you’re anxious to

start using your television right away, a quick setup guide follows on the next few pages.

Used to connect JVC AV CompuLink

capable components for an

automated home theater.

AV CompuLink Cable

Used to connect high bandwidth

digital content protection DTV

decoders, DVD players and D-VHS

players

DVI-D Single Link

19-pin Cable

Used to connect an i.LINK

compatable device to your TV.

i.LINK Cable

Used to connect an amplifer that

has an optical digital input terminal.

Optical Audio Cable

AV-56\65WP941 English 9 10/17/03, 1:02:50 PM

COMPONENT VIDEO

AUDIO

SUBWOOFER AUDIO OUT

R L

OUT

VIDEO ATSC OUTPUT

S VIDEO

INPUT 2 INPUT 1

INPUT 3

INPUT 2

INPUT 1

AV COMPULINK

OVER

VIDEO

AUDIO

SPEAKER INPUT

SERVICE PORT FOR

SERVICE PERSON

OPTICAL OUT

DIGITAL AUDIO

i.LINK IN OUT

S400(TS)

ATSC IN

16Ω

60 W MAX

75Ω

(VHF/UHF)

UNPLUG THE POWER CORD FROM AC OUTLET

BEFORE REMOVING THE REAR COVER

When the rear cover is removed, follow "CAUTION AT DISASSEMBLY"

procedure in the service manual before plugging the TV's power

cord into an AC outlet. Failure to follow the procedure will result

in PERMANENT damage to some of the television features.

DÉBRANCHEZ LE CORDON DE LA PRISE DE COURANT

C. A. AVANT DE RETIRER LE COUVERCLE ARRIÈRE.

Une fois le couvercle arrière déposé suivez l procédure

« ATTENTION LORS DU DÉMONTAGE » décrite dans une

prise c.a. L'omission de suivre la procédure causera des

dommages PERMANENTS à certaines fonctions du téléviseur.

Licensed from BBE Sound, Inc. under USP4638258, 4482866

and 5510752.

BBE is a registered trademark of BBE Sound, Inc.

Sous licence de BBE Sound, Inc.

BBE est une marque de fabrique déposée de BBE Sound, Inc.

Autorizado con licencia de BBE Sound, Inc.

BBE es une marca comercial registrada de BBE Sound, Inc.

DIGITAL IN

AUDIO

VIDEO

MODELS:

AV-65WP94

AV-56WP94

MODELS: AV-65WP94, AV-56WP94

Quick Setup TV Models

NOTE: Before you connect your television to another device, please refer to the proper

diagrams for your specific TV and remote. These will help assist you in understanding

how to connect your television to another device, as well as use the remote to set up

your television.

Rear Panel Diagram

Front Panel Diagram

PULL OPEN

POWER

HDTV

S-VIDEO

OVER

VIDEO L / MONO

AUDIO

INPUT-4

MENU – CHANNEL + – VOLUME +

SUPER

FOCUS

OPERATE

POWER

PULL/OPEN

NOTE: The terminal labeled "SERVICE PORT FOR SERVICE PERSON", is only to be used

by a service person. DO NOT use this terminal.

AV-56\65WP941 English 10 10/17/03, 1:02:50 PM

INPUT 1

INDEX

FREEZE

SWAP

SELECT SLEEP

RETURN+

INPUT 2

INPUT 3

INPUT 4

DIGITAL-IN

THEATER

PRO

DIGITAL

VIDEO

STATUS

iLINK/TIMER

– SUB CHANNEL +

LIGHT

CATV VCR DVD

MUTING

BACK

EPG

RM-C12G

REW

VCR CHANNEL

PREV NEXT

VCR / DVD

POWER

TV / VCR

FFPLAY

REC PAUSE

OPEN CLOSE

STILL PAUSE

STOP

VOL VOL

MULTI SCREEN

SPLIT

ML/MTS

D-IN

123

456

789

100+

POWER

DISPLAY

DCS

–

ASPECT

MODELS:

AV-65WP94

AV-56WP94

Quick Setup TV Remote Control

RM-C12G

• For information on remote control buttons, see pages 59 - 73.

• The DIGITAL CH (DCS), iLINK/TIMER, SUB CHANNEL +/– and EPG buttons are for digital

channels. If your TV is connected to an ATSC antenna, you can use these buttons.

AV-56\65WP941 English 11 10/17/03, 1:02:51 PM

These quick setup pages will provide you, in three easy steps, with the basic information you

need to begin using your new television right away.

If you have questions, or for more detailed information on any of these steps, please consult

other sections of this manual.

Before you can operate your remote

control, you first need to install the

batteries (included).

Slide the cover on the back of the

remote down towards the bottom of

the remote control. Insert two batteries

(included) carefully noting the “+” and “–”

markings, placing the “–” end in the unit

first. Slide the cover back into place.

When you change the batteries, try to complete the task within three minutes. If you take

longer than three minutes, the remote control codes for your VCR, DVD, and/or cable

box/satellite receiver may have to be reset. See pages 26 - 29.

Quick Setup Getting Started

Getting Started

Step 1 – The Remote Control

Key Feature Buttons

The four key feature buttons at the center of the remote

can be used for basic operation of the television. The top

and bottom buttons will scan forward and back through the

available channels. To move rapidly through the channels

using JVC’s Hyperscan feature, press and hold CH+ or

CH –. The channels will zip by at a rate of five channels per

second. The right and left buttons will turn the volume up or

down. These buttons are also marked with four arrows and

are used with JVC’s onscreen menu system. To use the

onscreen menus, press the M

ENU button.

MUTING

BACK

EPG

VOL VOL

AV-56\65WP941 English 12 10/17/03, 1:02:51 PM

Quick Setup Connections

Please follow the flow chart below to determine which connection setup is right for you. Then,

refer to the appropriate diagrams to connect your television to other devices that you may have.

After you are finished connecting your devices, plug the power cord into the nearest power

outlet and turn on the TV.

Step 2 – Connecting Your Devices

A VCR is not necessary for operation of the television. If you follow these diagrams and the

television does not work properly, contact your local cable operator.

• To connect a DVD player, see Diagram #3. A DVD player is optional.

• If you have a satellite television system, please refer to the satellite TV manual.

Basic Operation

Turn the television on and off by pressing the POWER button at the top right corner

of the remote. If this is the first time you are turning on the TV, the interactive plug-

in menu appears.

• Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if you

need to operate a cable box.

• Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to

DVD to control a DVD player. Please see pages 26 to 29 for instructions on

programming your remote control to operate a cable box, VCR or DVD player.

POWER

Diagram #2

Do you use a Cable TV Box?

Do you have a VCR? Do you have a VCR?

Diagram #1 Diagram #3 Diagram #1

Yes

Yes No Yes No

CATV

MUL

VCR DVD

LTI SCREEN

AV-56\65WP941 English 13 10/17/03, 1:02:51 PM

Quick Setup Connections

Notes:

• If you do not have a cable box, connect the cable wire from the wall outlet into the back of

the TV.

• If you want to connect both an NTSC and ATSC antenna or cable, use a two way splitter.

OUT IN

75 Ω

(VHF / UHF)

Cable or Antenna

Output

TV Rear Panel

Cable Box

Coaxial Cable

Diagram #1

ATSC IN

Cable or Antenna

Output

TV Rear Panel

Coaxial Cable

ATSC Antenna Connection

AV-56\65WP941 English 14 10/17/03, 1:02:51 PM

Notes:

• If your VCR is a mono sound unit, it will have only one audio out jack. Connect it to the

LEFT AUDIO INPUT on the front of the TV.

• Use the S-Video connection if possible for superior picture quality.

• Your VCR must be turned on to view premium cable channels.

• When you play the limited recording program or the limited copied media, ATSC OUTPUT

does not output anything.

• If you are recording an analog signal through the ATSC Monitor output, do not press the EPG

button or do not operate ATSC MONITOR OUT in the Initial Setup Menu while recording. If

you press or operate it, the picture may be blurred.

AUDIO

R L

VIDEO ATSC OUTPUT

S VIDEO

INPUT 3

INPUT 2

INPUT 1

AV COMPULINK

OVER

VIDEO

AUDIO

75 Ω

(VHF / UHF)

OUT

VCR

R L V

OUT

OUT IN

Two-Way

Splitter

OUT OUT

Cable or Antenna Outpu

TV Rear Panel

Cable Box

Coaxial

Cable

Diagram #2

Quick Setup Connections

Recording a broadcast from ATSC connection

AUDIO

R L

VIDEO ATSC OUTPUT

S VIDEO

INPUT 3

INPUT 2

INPUT 1

AV COMPULINK

OVER

VIDEO

AUDIO

OUT

VCR

V L R

OUT

TV Rear Panel

AV-56\65WP941 English 15 10/17/03, 1:02:51 PM

Quick Setup Connections

Notes:

• Green, blue and red are the most common colors for DVD cables. Some models may vary

colors. Please consult the user’s manual for your DVD player for more information.

• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete

one set of connections (DVD or audio output) before starting the other to avoid accidentally

switching the cables.

• You may also connect the DVD player to Input 1.

COMPONENT VIDEO

AUDIO

R L

VIDEO ATSC OUTPUT

S VIDEO

INPUT 2 INPUT 1

INPUT 3

INPUT 2

INPUT 1

AV COMPULINK

OVER

VIDEO

AUDIO

OUT

R L V

OUT

75 Ω

(VHF / UHF)

DVD Player (Optional)

OUT

AUDIO OUT

R L

Green

Blue

Red

OUT OUT

VCR

Two-Way

Splitter

Cable or Antenna Output

TV Rear Panel

Coaxial Cable

Diagram #3

AV-56\65WP941 English 16 10/17/03, 1:02:52 PM

JVC’s AV CompuLink feature makes playing video tapes or DVDs totally automatic. Simply

insert a pre-recorded tape into your JVC brand VCR or DVD into your JVC DVD player and

the device will automatically turn on and begin playback. At the same time, using the

AV CompuLink, the VCR or DVD player sends a signal to the television telling it to turn on

and switch to the proper video input.

• The AV CompuLink cable may be included with the JVC AV CompuLink unit you

wish to connect. If it is not, contact JVC Parts Department at (800)-882-2345, or

www.jvcservice.com for part # EWP 805-012.

• AV CompuLink can only be used with JVC brand products.

Notes:

• In order for the VCR playback to begin automatically, the recording tabs must be removed

from the VHS tape. If the tab is in place, automatic switching will occur when you push the

VCR’s P

LAY button.

• If your JVC brand VCR has “A code/B code remote control switching” (see your VCR’s

instruction book), using VCR A code will switch the TV to input 1.

• Refer to your DVD instruction book for detailed connection information.

• To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see the

receiver connection instructions for detailed connection information.

• AV CompuLink is compatible with select AV CompuLink receivers.

AV CompuLink

OUT

V L R

OUT

VCR

TV Rear Panel

AV COMPULINK III

Connecting to JVC AV Compu Link

Quick Setup Connections

AV CompuLink Cable

To Connect: Plug one end of the AV CompuLink cable

into the AV COMPULINK INPUT on your VCR, DVD,

or other CompuLink device. Plug the other end of the

AV CompuLink cable into the AV COMPULINK at the

rear of the television.

Note:

• The AV CompuLink cable has a male 3.5 mm (mono)

plug on each end.

AV-56\65WP941 English 17 10/17/03, 1:02:52 PM

Quick Setup Connections

1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on

the front of the TV, OR connect an S-Video cable from the front of the TV to the camcorder.

2) Connect a white cable from the camcorder LEFT AUDIO OUT, into the LEFT AUDIO IN on

the front of the TV.

3) Connect a red cable from the camcorder RIGHT AUDIO OUT, into the RIGHT AUDIO IN on

the front of the TV.

Note:

• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the

LEFT AUDIO IN on the front of the TV.

You may connect a camcorder, game console or other equipment to your television by using

the front input jacks (Input 4) located under the front panel door. To access, pull on the door

to open it. You can also connect these using the television’s rear input jacks, using the same

instructions.

S-VIDEO

OVER

VIDEO L / MONO

AUDIO

INPUT-4

MENU – CHANNEL + – VOLUME +

SUPER

FOCUS

OPERATE

CAMCORDE

- OR -

Connecting to a Camcorder

Connecting to the Surround Amplifier

BLACK

RED

Front

Center Speaker Out

SPEAKER INPUT

16Ω 60W MAX

TV Rear Panel

Front Surround

1) Connect the black speaker cable from the TV’s SPEAKER INPUT terminal to the

surround amplifier’s CENTER SPEAKER OUTPUT terminal.

2) Connect the red speaker cable from the TV’s SPEAKER INPUT terminal to the

surround amplifier’s CENTER SPEAKER OUTPUT terminal.

Note: Please read the benefit of this feature on page 50.

AV-56\65WP941 English 18 10/17/03, 1:02:52 PM

Quick Setup Connections

TV Rear Panel

ROUT

AUDIO OUTSUBWOOFER

Speaker

Amplifier

Powered

Subwoofer

1) Connect a white cable from the LEFT AUDIO OUTPUT on the back of the TV to the

LEFT AUDIO INPUT on the amplifier.

2) Connect a red cable from the RIGHT AUDIO OUTPUT on the back of the TV to the

RIGHT AUDIO INPUT on the amplifier.

3) Connect a black cable from the SUBWOOFER OUT on the back of the TV to

the LINE INPUT of the subwoofer.

Notes:

• Refer to your amplifier’s manual for more information.

• You can use AUDIO OUTPUT for your home theater system.

Connecting to an External Amplifier

Subwoofer Out - Use a powered subwoofer with the surround feature to simulate a home

theater system. Simply connect the subwoofer to the back of the TV.

Connecting to an amplifier using your optical output

You can connect an amplifier that has an optical digital input terminal by using an optical digital

cable from the optical output. The signal that is output can be PCM or Dolby Digital.

Television Rear Panel

Amplifier

OPTICAL OUT

DIGITAL AUDIO

1) Connect the optical cable from the back of the television to the back of the amplifier.

Notes:

• This terminal can only output ATSC audio.

• In order to use the optical output connection, select PCM or Dolby Digital on ATSC SOUND

in the INITIAL SETUP MENU. See page 51.

• Refer to your owners manual on using your amplifier.

AV-56\65WP941 English 19 10/17/03, 1:02:53 PM

Quick Setup Connections

DTV Decoder

After the connections have been made,

tighten the screw to secure the cables.

AUDIO OUT

DIGITAL OUT

DIGITAL IN

AUDIO

VIDEO

By inputting a high bandwidth digital content protection high definition picture source to the

digital-in terminal of this television, high-definition pictures can be displayed on the screen in

their digital form. (This terminal is for use in the future when high bandwidth digital content

protection DTV decoders and DVD players and D-VHS are put on the market.)

1) Connect the DTV DIGITAL RGB OUTPUT TERMINAL to the DIGITAL INPUT TERMINAL of

the television, and then tighten the 2 screws.

2) Connect the DTV decoder LEFT AUDIO OUTPUT to the DIGITAL-IN LEFT AUDIO INPUT.

3) Connect the DTV decoder RIGHT AUDIO OUTPUT to the DIGITAL-IN RIGHT AUDIO

INPUT.

• The Digital-In terminal can only be used with 1080i, 720p and 480p picture signals. Set

the DTV decode digital-out terminal output setting to 1080i, 720p or 480p. For detailed

information, refer to the DTV decoder instruction manual. If you can not display the picture

because your DTV decoder does not have a digital-out terminal output setting, use the

component video input (or the S-Video input or video input). Refer to page 14. In this case

the picture will be displayed as an analog signal.

• The digital-in terminal is not compatible with the picture signal of a personal computer.

• Use a DVI-D single link 19-pin cable (commercially available) in order to digitally connect the

television with a DTV decoder.

If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance may

be slightly shifted. In cases such as this, the horizontal balance can be adjusted by accessing

“DIGITAL-IN” in the INITIAL SETUP menu. (Refer to page 51.)

Connecting to a Digital TV Receiver w/HDCP

AV-56\65WP941 English 20 10/17/03, 1:02:53 PM

Page is loading ...

JVC AV 56WP94 User manual

Brand: JVC

Model: AV 56WP94

Category: LCD TVs

Type: User manual

This manual is also suitable for

AV-65WP94

Download PDF

report

JVC AV 56WP94 User manual

This manual is also suitable for

JVC AV 56WP94 User manual

Related papers

Other documents