3M MR3 User manual

Manual Roller MR3

Technical Datasheet

J. Schätzmüller Version 06/2008

Automotive Germany

Automotive

Manual Roller MR3

Technical Datasheet

Description:

Manual pressing-system with spring mounted and locked

roll, which becomes unlocked when an adjusted contact

pressure is reached.

A reproducible minimum contact pressure (basic setting

= 78 N/cm²) is ensured by the defined pressure transmission

of the Manual Roller MR3.

Thereby it is possible to pressurize attachment parts

reproducible and process-sure and a sufficient wet-out of the

tape to the substrate can be achieved.

Construction of the Manual Roller MR3

o Aluminum main part

o Additional handle bars

o Locking- and unlocking device

o Pivoted rubber press roll (Design has to be

o specified for every application)

o Pressure spring (has to be specified for every

o application)

For technical information about this product please contact Klaus Malecki at

3M Germany (kmalecki[email protected])