Linear 1092-01 is a power adapter kit that allows you to connect a three-tab radio control receiver to a garage door operator that doesn't conform to the three-terminal standard adopted by DORCMA. This means that you can use this kit to add remote control functionality to your garage door, even if your door operator doesn't have the standard three terminals.

The kit includes a terminal block with three screws, two spade lugs, and two sheet metal screws. To install the kit, simply loosen the three screws on the terminal block, insert the receiver tabs under the lugs, and retighten the screws. Then, mount the receiver near the operator power head on a joist or the ceiling using the sheet metal screws. Finally, connect the two spade lugs to the wall button terminals on the operator and plug the transformer into a 115 VAC outlet.