GE AJM10AF User manual

GE
Brand
GE
Model
AJM10AF
Category
Split-system air conditioners
Type
User manual

GE AJM10AF is a powerful and efficient air conditioner with a 10,200 BTU cooling capacity and an 8.5 EER rating. It features 10 thermostat settings, 2 cooling speeds, and 2 fan speeds for customized comfort. The slide-out chassis and filter make cleaning a breeze, while the hidden exhaust control allows for air exchange. With its decorative Warm Gray-Beige front, this unit will blend seamlessly with any home décor.

GE AJM10AF is a powerful and efficient air conditioner with a 10,200 BTU cooling capacity and an 8.5 EER rating. It features 10 thermostat settings, 2 cooling speeds, and 2 fan speeds for customized comfort. The slide-out chassis and filter make cleaning a breeze, while the hidden exhaust control allows for air exchange. With its decorative Warm Gray-Beige front, this unit will blend seamlessly with any home décor.

AJM10AF—”J Series” Cool Unit
GE Appliances
Revised 6/96
Note: When installing units in through-the-wall applications. 
Do not restrict air flow areas.
26
15-5/8
16-7/8
R
Total capacity and E.E.R.
ratings are calculated
based on the Association
of Home Appliance
Manufacturers' standards.
Listed by
Underwriters
Laboratories
For answers to your GE Monogram,
™
GE Profile,
™
GE, Hotpoint and RCA appliance questions, call
GE Answer Center
®
service, 800.626.2000.
Wall Case Dimensions (in inches)
Parallel
115V
15 Amp
Revised 6/96
GE Appliances
AJM10AF—Built-In Room Air Conditioner RAB46/47/48
Brick Block and Brick
Frame Construction
Fill open cells
with mortar
or insulation
5" Min.
from floor
15-3/4
26-1/8
Lintel
R
Total capacity and E.E.R.
ratings are calculated
based on the Association
of Home Appliance
Manufacturers' standards.
Listed by
Underwriters
Laboratories
For answers to your GE Monogram,
™
GE Profile,
™
GE, Hotpoint and RCA appliance questions, call
GE Answer Center
®
service, 800.626.2000.
Dimensions (in inches)
Installation Information: A finished opening of
26-1/8" x 15-3/4" clear of intrusions is required. Keep
clearance of 4" from side walls. Brick veneer or frame
walls should have wood studding surrounding case to
provide firm anchoring with screws. Case can be fastened
directly to brick or block walls with screws sunk in lead
expansion shields.
Make frame if desired or caulk 
between case and siding
15-3/4
26-1/8
5" Min.
from floor
Frame Construction
Lintel
OUTSIDE INSIDE
16-7/8
Caulking
Drip Rail
Trim Moulding
(if desired)
Plaster Line
Flexible Mounting Position
GE Appliances
Revised 6/96
AJM10AF—”J Series” Cool Unit
Features and Benefits
•Decorative Warm Gray-Beige Front
•10,200 BTUH, 8.5 EER, 115 Volts
•Hidden Energy Saver Switch for Reduced Energy Consumption
•10-Position Thermostat
•2 Cooling/2 Fan Speeds
•Slide-Out Filter for Easy Cleaning
•Hidden Exhaust Control for Air Exchange
•Slide-Out Chassis
•Chassis Only–Without Wall Case and Mounting Kit
•Wall Case–Optional Accessory
•Window Mounting Kit–Optional Accessory
•Plug Type–Parallel
1
5
4
3
2
6
7
8
9
10
HIGH
FAN
LOW
FAN
OFF
LOW
COOL
HIGH
COOL
C
O
O
L
E
R
THERMOSTAT SELECTOR
GE Quality Product
  • Page 1 1
  • Page 2 2
  • Page 3 3

GE AJM10AF User manual

GE
Brand
GE
Model
AJM10AF
Category
Split-system air conditioners
Type
User manual

GE AJM10AF is a powerful and efficient air conditioner with a 10,200 BTU cooling capacity and an 8.5 EER rating. It features 10 thermostat settings, 2 cooling speeds, and 2 fan speeds for customized comfort. The slide-out chassis and filter make cleaning a breeze, while the hidden exhaust control allows for air exchange. With its decorative Warm Gray-Beige front, this unit will blend seamlessly with any home décor.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers