(5)
Press the
Color
button or the
button.
The machine starts printing photos.
Note
Press the
Stop
button to cancel printing.
Printing does not start if you press the
Black button.
To remove the memory card, see
Removing the Memory Card
.
Changing the Settings
You can use the
(Up),
(Down),
(Left), or
(Right) button to change the print setting such as the
paper size, media type, or print quality to print.
Settings Tab 1:
(1)
Page size
Select the page size of the paper to print: 4"x6" (10x15cm), A4, etc.
(2)
Media type
Select the media type of the paper to print: Plus Glossy II, Plain paper, etc.
Note
If you do not select media type correctly, the machine may not print with the proper print
quality.
(3)
Print quality
Adjust the print quality: Print quality (quality-priority), Print quality (standard).
(4)
Layout
Select layout of photo print, such as Borderless, Borderless half side, or Bordered x2, etc. For a sample
image using this function, see Using Various Functions
.
Note
When Plain paper is selected for the media type, you cannot select Borderless or
Borderless half side.
If the ratio of the height to the width differs from the image data when Borderless or
Borderless half side is selected, a portion of the image may not be printed depending on
the size of the media used.
To enable the print date or auto photo fix function automatically or manually, select the
Settings Tab 2. For details, refer to the on-screen manual:
.
Note
The settings of the page size, media type, print quality, layout, image correction are retained,
and these settings will appear next time when a photo is selected in the card mode even if the
power is turned off and on.
Combination of some items cannot be specified depending on the function.
Using Photo Index Sheet to print
Thumbnails of photos on the memory card are printed on A4 or Letter-sized paper (this printed sheet is
called Photo Index Sheet). You can select photos, number of copies, page size, etc. on this sheet, and
Page 15 of 726 pagesPrinting Photos Saved on the Memory Card