AUSTRALIAN MONITOR Rapid Fit RF4 Installation guide

Brand: AUSTRALIAN MONITOR

Model: Rapid Fit RF4

Category: Ceiling lighting

Type: Installation guide

This manual is also suitable for

Rapid Fit RF4

Installation Series

The Australian Monitor Installation Series Rapid

Fit 4 is a low cost and discreet ceiling speaker.

The Rapid Fit 4 features a low cost plastic grill of

stylish design and a 4 inch 100 volt speaker with

5, 2.5, 1, 0.5 & 0.33 watt tapings.

The Rapid ﬁ t 4 offers a very cost effective &

architecturally pleasing ceiling speaker package.

The Rapid Fit 4 also saves on installation costs as

it is extremely quick & simple to install via its two

pre-tensioned spring clip mounting system.

103mm

133mm

153mm

Engineered and Distributed by AUDIO TELEX COMMUNICATIONS PTY LTD (ABN 78 001 345 482), 149 Beaconsﬁ eld Street, Silverwater, Sydney, NSW, 2128 Australia

NSW Tel: (02) 9647 1411 Fax: (02) 9648 3698 VIC Tel: (03) 9890 7477 Fax: (03) 9890 7977 QLD Tel: (07) 3852 1312 Fax: (07) 3252 1237 WA Tel: (08) 9228 4222 Fax: (08) 9228 4233

SA Tel: (08) 8352 4444 Fax: (08) 8352 4488 NZ Tel: (09) 415 9426 Fax: (09) 415 9864 International Enquiries - [email protected] www.australianmonitor.com.au

Architecture & Engineering Speciﬁ cations

The Speaker shall be 100mm, 100 volt line type with

trappings at 5w, 2.5w, 1w, 0.5w, 0.3w and shall come

complete with plastic grill assembly and pre tension metal

clips. The speaker shall be the Australian Monitor

Installation Series Rapid Fit 4.

Speciﬁ cations - Rapid Fit 4 Speaker & Ceiling Grill Assembly

Driver Wattage: 10W

Driver Impedance: 8 Ohms

100 Volt Line Power Tappings: 5w / 2.5w / 1w / 0.5w / 0.33W

100 Volt Line Impedence: 2k / 4k / 10k / 20k / 30.3k

Sound Pressure Level @ 1w/1m: 92dB