Page is loading ...
Addendum FW 1.06 MyM-T
English
Changed functionality in MyM from FW version 1.05 and
FW 1.06
1. In the first time installation, MyM will not start an automatic
channel search.
To make a channel search do:
Press the OK button
The Settings menu appear on screen
Step the arrow down to line Channel search
Press the OK button
This starts the channel search
English
2. When VHF is chosen as output there is possible to get two
different channel raster. 7 Mhz or 8 Mhz channel raster can
be chosen.
Examples for 7 and 8 MHz settings
English
3. In a MyM-T with FW 1.06 there is a possibility to set the
Audio level (volume) individually for output Channel 1,
Channel 2 and Channel 3.
This is can be changed in the Advanced settings menu under
the sub menu Audio settings. In this menu you chose [1] for
Channel 1, [2] for Channel 2 and [3] for Channel 3. After
press the OK button for any of the output channels you can
adjust between 9 and -3.
NOTE! -3 is the highest value and 9 is no sound.
Position 9 can be useful for trouble shooting if there is
a disturbance in sound.
4
www.a2b.se
A2B Electronics AB
P.O. Box 14, SE-591 21 MOTALA
Sweden
Phone +46 141 229100
Fax +46 141 229101
E-mail [email protected]
Visiting address
Södra Allén 23-25, Motala
To view our full line of Professional Products, visit our Web site www.a2b.se
FW 1.06 rev A
/
