AneX AG-2050 Operating instructions

Brand: AneX

Model: AG-2050

Category: Slicers

Type: Operating instructions

This manual is also suitable for

AG-3053

AneX AG-2050

This versatile food processor is designed to make food preparation quick and easy.

With its powerful 500W motor and sharp stainless steel blades, the AG-2050 can effortlessly chop, mince, mix, and slice a variety of ingredients. The included attachments allow you to create everything from smooth purees to crisp salads.

The juicer attachment is perfect for making fresh, healthy juices from fruits and vegetables. The milling cup is ideal for grinding coffee beans, nuts, and spices. And the mixing cup is great for making batters, doughs, and sauces.

The AG-2050 also features a number of safety features, including a non-slip base and a safety lock that prevents the motor from starting until the lid is securely in place.

AneX AG-2050

This versatile food processor is designed to make food preparation quick and easy.

The AG-2050 also features a number of safety features, including a non-slip base and a safety lock that prevents the motor from starting until the lid is securely in place.

5 Cleaning And Maintenance

a) The Power Plug Must Be Pulled Out From Mains Socket Before Cleaning The Parts And

Main Engine To Prevent Electric Shock.

b) Except Main Engine All Parts Maybe Cleaned In Water And Then Dried Up.

c) Any Residue Shouldn’t Be Remained In The Filter Screen So As To Ensure A Running Bal-

ance.

d) A Certain Volume Of Heat Water And Several Drops Of Food Cleaner Maybe Added In The

Water When The Mixing And Mincing Are To Be Washed. They Can Be Cleaned Through An

Idle Running By Switching On The Power Button Or Quick Cleaning Button For 10 Seconds

.Also, They Can Be In Water By A Brush.

e)The Device Should Be Stored In A Dry And Ventilated Place When They Are Not In Use.

f) Switch Off And Pull The Plug Before Change Of Accessories.

Instructions for use

Best. No... item no... Ref. No.

AG-3053

a )Overload And Idle Running Is Forbidden During Use.

b)The Milling Cup Is Only Suitable For Processing Dry Food Into

Power. Don’t Pour Any Liquid Into It. The Recommended Quantity

Of Food Put In The Cup Is 1/3 To 2/3 Of The Volume Of The Cup.

c ) Water Of Edible Oil Must Be Remained In The Filter Screen So

As To Ensure A Running Balance.

d) A Certain Volume Of Heat Water And Several Drops Of Food

Cleaner May Be Added In The Water When The Mixing And Minc-

ing Cups Are To Be Washed. They Can Be Cleaned Through An

Idle Running By Switching On The Power Button Or Quick Clean-

ing Button For 10 Seconds. Also, They Can Be Cleaned In Water

By A Brush.

e) The Device Should Be Stored In A Dry And Ventilated Place

When They Are Not In Use.

f) The Blade Is Very Sharp, At Cleaning With Replace The Agitation

Knife Hour Must Look Out.

g) If The Supply Cord Is Damaged, It Must Be Replaced By The

Manufacturer Or Its Service Agent Or A Similarly Qualiﬁed Person

In Order To Avoid A Hazard.

(3)Combination With Mincing Cup And Usage

a) Put The Main Engine A On The Flat Top Of A Table.

b) Amount The Mincing Cup X To The Main Engine. Press Down The Cup And Screw It Counter-

clockwise So As To Get The Cramp On The Cup Firmly Locked At The Cramping Position Of Main

Engine.

c) Cut The Meat Into Small Pieces (Get Rid Of Skins, Boned And Tendons) And But Them Into The

Mincing Cup. Put On The Cover Of Mincing Cup And Get It Pressed Tightly.

d) Press The Mincing Cup By One Hand And Switch On The Power By Another Hand To Start The

Mincing Operation.

Caution

FOOD

PROCESSOR

COMBINED MULTIFUNCTION

Continue Work Time : Don’t Exceed 1 Minute

The Turning Of Electric Appliances Is Soon:

About 12000 Rpm.

2 Main technical parameters

1.Rated Voltage: 220-240V~

2 Rated Frequency: 50Hz

3. Rated Power: 500W

4. Protection Class II

3 Combination of juicer and method for use

1. Put The Engine A On A Table

2. Put The Juice-Residue Separating Slot Q Onto The Engine And Tighten It

Counterclockwise.

3. Amount The Filter P To The Driving Gear.

4. Put The Transparent Cover O Onto The Separating Slot Q And Then Get The

Safety Buckle Engaged In And Make The Separating Slot Q Be Firmly Fixed

With The Transparent Cover O.

5. Let The Juicer Have An Idle Operation For Five Seconds Before Putting It Into

Work Operation, Which May Prolong The Service Life Of This Product.

6. Get Rid Of Fruit Skin And Slice Up The Fruit Properly. Put The Sliced Fruit

Into Feeding Port And Push Them Into The Juicer By Feeding Bar.

7. The Juicer Can Be Disassembled Only After The Running Of Motor Has Com-

pletely Stopped.

Caution:

1. The Power Switch Must Be Turned On Prior To Feeding Sliced Foods. Don’t

Use This Juicer For Processing Those Fruits That They Are Extremely Soft And

The Separation Of Juice From Residues Is Difﬁcult.

2. The Power Must Be Turned Off Immediately If The Motor Doesn’t Run After

The Switch Has Been Turned On. It Can Be Restarted Only After The Trouble

Has Been Found Out And Remedied.

3. When It Is Used For Pressing Sugarcane, The Sugarcane Must Be Cut Into

Proper Pieces With Proper Thickness. During Operation, The Sugarcane Pieces

Should Be Pressed Down While Being Rotated.

4. When Operation Is Finished, All Parts Or Components Must Be Cleaned Up

And Assembled To Have A Dewater Operation.

5. The Main Engine Mustn’t Be Cleaned In Water Or Rinsed With

Water. It

Should Be Cleaned By Wet Cloth.

6. Don’t Operate The Juice By Children.

7. Don’t Use The Appliance If The Rotating Sieve Is Damaged

FOOD

PROCESSOR

COMBINED MULTIFUNCTION

4. Combination Of Mixer And Method For Use (In Combination With Milling

Cup, Mixing Cup, And Mincing Cup)

(1) Combination With Milling Cup And Usage

a) Put The Main Engine A On The Flat Top Of A Table.

b) Make The Milling Cup Stand Upside Down And Put The Food Into It. Attach The Blade Assem-

bly To The Milling Cup By Screwing It Clockwise.

c) Get The Milling Cup T Stood Upward And Put It Onto The Main Engine. Press Down The Mill-

ing Cup And Screw It Counterclockwise At The Same Tome So As To Make The Cramp On The

Milling Cup Firmly Fixed At The Cramping Position Of Main Engine.

d) The Milling Operation Starts When The Power Switch Is Turned On.

(2) Combination With Mixing Cup And Usage

a) Put The Main Engine On The Flat Top Of A Table.

b) Amount The Mixing Cup J To The Main Engine. Press Down The Cup And Screw It Counter-

clockwise So As To Get The Cramp On The Cup Firmly Locked At The Cramping Position Of The

Main Engine.

c) Cut The Food Into Cubes Or Slices And Then Put Them Into Mixing Cup. Put On The Mixing

Cover And Fix It Firmly By Cramp.

d) Press The Mixing Cup By One Hand And Switch On The Power By Another Hand To Start The

Mixing Operation.

FOOD

PROCESSOR

COMBINED MULTIFUNCTION

FOOD PROCESSOR

COMBINED MULTIFUNCTION

3 4

a) The Main Engine Is Placed On The Flat Table.

b) The Cup Body Installed With The Speed Regulator Is

Placed On The Principal To Press Up And Down And It Is

Rotated Counterclockwise At Same Time So That The Clip

Foot On The Cup Is Locked With The Clipper Of Main Engine

Firmly.

c) The Feed Tray (Y Stripe Faces Upward) Is Installed In The

Rotating Shaft Of Speed Regulator (Pay Attention To The

Alignment).

d) The Cutter Head Of Slicing And Section Is Installed On The

Feed Tray (Pay Attention To Hexagonal Alignment) The Cutter

Head Of Slicing Knife Can Be Used In Front And Back Face.

The Front Face Is Slicing And Back Face Is Section. The

Slicing Knife Faces Upward For Slicing .On The Contrast, It Is

Tightened.

e) The Cropping Cover Is Placed On The Cup Body To Press

Up And Down And It Is Tightened Counterclockwise At Same

Time.

f) Please Operate The Engine With No More 5 Seconds

Before Processing The Food In Order To Prolong The Service

Life Of Engine.

g) The Food Materials To Be Sliced Or Cut Are Placed In The

Charging Opening For Slicing And Section. If Necessary, The

Charging Arm Presses The Food Materials By Applying The

Force Evenly.

h) When Cleaning The Food Materials Or Assembly, The At-

taching Plug Must Be Unplugged To Avoid Danger.

(4) Combination And Use Of Slicing And Section

transfer plate

feeding bar

transparent cover

mincing cup

FOOD PROCESSOR

COMBINED MULTIFUNCTION

slicing blade

Food Processor

Thank You For Your Choice To Buy And Use The Series Combined Multifunction Food Processor. Please Read This Instruction

Carefully Before Use So As To Make The Functions Of This Product A Full User.

A. Engine

B. Driving Gear

C. Knob For Selection Of Speed

D. Bottom Cover

E. Knob For Quick Cleaning

F. Fixing Cramp

G. Cover Of Mixing Cup

J Mixing Cup

K Rub Seal Ring

L Assembly Of Blade

M Feeding Bar

N Feeding Passage

O Transparent Cover

P Juice Filer

Q Residue-Juice Separating Slot

R Safety Buckle

S Residue Collector

T Milling Cup

U Rub Seal Ring

V Assembly Of Mifﬁng Blade

W Cover Of Mincing Cup

X Mincing Cup

Z Juice Cup

Caution

1. The Device Should Be Stored In A Dry And Ventilated

Place When They Are Not In Use.

2. The Razor Blade Is Very Sharp, At Cleaning With

Replace The Agitation Knife Hour Must Look Out.

3. If The Supply Cord Is Damaged, It Must Be Replaced

By The Manufacturer Or Its Service Agent Or A Similarly

Qualiﬁed Person In Order To Avoid A Hazard.

Model Number: LSU-1411

FOOD

PROCESSOR

COMBINED MULTIFUNCTION

AneX AG-2050 Operating instructions

Brand: AneX

Model: AG-2050

Category: Slicers

Type: Operating instructions

This manual is also suitable for

AG-3053

AneX AG-2050

This versatile food processor is designed to make food preparation quick and easy.

The AG-2050 also features a number of safety features, including a non-slip base and a safety lock that prevents the motor from starting until the lid is securely in place.

Download PDF

report

AneX AG-2050 Operating instructions

This manual is also suitable for

AneX AG-2050 Operating instructions

Other documents