Auralic ARIES MINI Drive Installation Manual

Type
Drive Installation Manual
ARIES MINI is compatible with most hard disk drive or solid
state drive available on the market. Though there are some
limitation, your choice is pretty fleixble. Here are some
suggestions from AURALiC:
1
Maximum height of the drive: 9.5MM
2
Maximum current rate of the drive: 1000mA (1A)
3
Solid state drive is preferred because of no noise and vibration
4
Recommended HDD series: WD Red, Seagate Momentus
5
Recommended SSD brands: Intel, Samsung, Crucial, Plextor
6
Select only from major brands and high reliability series
7
No capacity limitation
Drive Installation Guide
ARIES MINI
Need Help?
AURALIC LIMITED | 声韵音响
1F Building No.7, 1A Chaoqian Road Beijing, 102200, China
163 E Compton Blvd, Gardena CA 90248, United States
http://www.auralic.com/ [email protected]
Please visit our knowledge base:
support.auralic.com
Choose the Right Storage
Please ask for professional peopleís help if you donít have
any experience changing a computerís internal storage
drive before. You will need the Drive Toolkit (shown as below)
coming with ARIES MINI to complete the following steps.
ALL DATA ON DRIVE WILL BE ERASED DURING INITIALIZATION.
DO NOT COPY ANY MUSIC IN ADVANCE.
DISCONNECT POWER CORD BEFORE INSTALLATION.
Preparation
1
Special screws for fix HDD/SSSD on drive tray:
2
TORX T8 screw drive:
ATTENTION
C
M
Y
CM
MY
CY
CMY
K
1
2
9
11
10
3
4
5
6
7
8
Remove drive cover screws
Remove drive tray Slide the drive tray as indicated Install drive cover
Make sure the tray is in position
Install drive cover screws
Install drive tray screws
Install drive with the screws in Drive Toolkit
Put drive tray back
Remove drive cover
Remove drive tray screws
12
Use Lightning DS Guide
to finish drive installation
C
M
Y
CM
MY
CY
CMY
K
  • Page 1 1
  • Page 2 2

Auralic ARIES MINI Drive Installation Manual

Type
Drive Installation Manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI