Zxtec GK-61 User manual

Brand
Zxtec
Model
GK-61
Type
User manual
R
User Manual
GK-61
Automatic Photoelectric-correct Controller
ZhongXing Industry Control Device Co.,Ltd Rui’an City
Address: NO.87 of ZhaoYang Road, Economic Development Zone,
Rui’an City, ZheJiang Province
Tel: 0086-577-65608165 65608162
Fax: 0086-577-65608163-815
Http://www.zxtec.cn
E-.mail:
P.C: 325200
zxtec@zxtec.cn
R
One. Product resume:
The controller can do automatic correct with thin film, paper...etc.
after printing when it matches synchronous motor, photoelectric eye and
ball bearing. Its control panel adopts micro-touch switch and its control
circuit adopts chip microcomputer to intelligent control. The controller
can selects single/double photoelectric eye to control. It can establish
response speed of the synchronous motor for cancel phenomenon of noise
and jarring excessive when we adopts single photoelectric eye to work.
Another increment circumscribe direction and appearance connecting
which makes more conveniently for correct operating.
Two Sketch map of front panel and switch
GK-61 Automatic Photoelectric-correct Controller
P1
Three. The control parts of the correct controller
(define with number 1-14 of the above scheme):
1. Inching button: Press them can make synchronous motor
turning forward or backward whenever the controller works
on auto or hand operation.
2. Switch for selecting photoelectric eye: Press it can select single
or double photoelectric eyes to work. Generally single eye is
used to track printing ray and edge of materials, but double eyes
is mainly used to track symmetry printing pattern(see diagram
below).
3. Indicator for selecting photoelectric eye: Indicate photoelectric
eye to choose in single or double appearance respectively.
R
GK-61 Automatic Photoelectric-correct Controller
P2
cutting knife irregular pattern photoelectric eye
track printing ray
single photoelectric eye track printing ray
irregular pattern
photoelectric eye
track edge
single photoelectric eye track edge of materials
cutting knife
cutting knife pattern
photoelectric eye
track pattern
photoelectric eye
track pattern
double photoelectric eye track printing pattern
4. Switch for selecting pole: Press it can choose bright or dark
work for photoelectric eye(see diagram below).
5. Indicator for selecting pole: Indicate photoelectric eye to
take a pole.
6. Automatic switch: The controller will carry on automatic
correcting when you press it. Meanwhile, turning forward or
backward of synchronous motor is controlled by the color code
which is detected by photoelectric eye whether deviates aim or
not.
pole is pole is
R
GK-61 Automatic Photoelectric-correct Controller
P3
photoelectric eye
track:
interior dark color
other light color
photoelectric eye
track:
interior light color
other dark color
7. Automatic appearance indicator: It is bright when the controller
works in automatic.
8. Hand -operating switch: Press it to make the controller works
in hand appearance. Meanwhile, turning forward or backward
of synchronous motor is controlled by the switch(1).
9. Hand appearance indicator: It is bright when the controller
works in hand appearance.
10. Adjusting switch of response speed: Press them to adjust
response speed of correction, bigger number slower speed,
contrarily quickly speed.
11. Display response speed: It displays the response speed.
12. Indicate the running direction of synchronous motor: They are
indicate the running direction of synchronous motor separately.
13. Limit indicator: It is bright when moving pole has already moved
to the correct valid scope of both ends of the extreme limit.
14. Power supply indicator: Indicate the power supply appearance
of the main computer plank of controller.
Four: Sketch map of moving pole:
moving pole
screw rod
limit switch
synchronous
motor
R
GK-61 Automatic Photoelectric-correct Controller
P4
Four: Wiring diagram of correction:
wiring diagram of correction
limit switch outer connect switchphotoelectric eyesynchronous motor 220V power supply
insurance
synchronous motor photoelectric eye limit switch outer connect switch
1. left
2. right
3. auto./hand.
4. 0V
1. 12V
2. 0V
3. left limit
4. right limit
1. 12V
2. 0V
3. eye 2
1. 12V
2. 0V
3. eye 1
1. left
2. right
3. bus
blue
yellow
white
red
ZhongXing Industry Control Device Co.,Ltd Rui’an City
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Zxtec GK-61 User manual

Brand
Zxtec
Model
GK-61
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents