Lefroy Brooks LB 4937 Installation & Servicing Guide

Type
Installation & Servicing Guide

Lefroy Brooks LB 4937 is a soap dish with a ceramic soap dish and holder. It is designed to be installed on a wall and comes with screws and wall plugs for easy installation. The soap dish is not suitable for use in shower cubicles or over baths with loose glass or ceramic/porcelain/fine bone china. It is recommended that the soap dish be installed by a fully qualified professional to ensure proper installation and to avoid any damage to the wall or the soap dish.

Lefroy Brooks LB 4937 is a soap dish with a ceramic soap dish and holder. It is designed to be installed on a wall and comes with screws and wall plugs for easy installation. The soap dish is not suitable for use in shower cubicles or over baths with loose glass or ceramic/porcelain/fine bone china. It is recommended that the soap dish be installed by a fully qualified professional to ensure proper installation and to avoid any damage to the wall or the soap dish.

LB 4937
EDWARDIAN CHINA SOAP DISH
INSTALLATION GUIDE
2
DIMENSIONS
IMPORTANT INFORMATION
Professional installation
We recommend that our products are fitted by
a fully qualified professional. A tester should
be used to ensure there are no hidden pipes or
electrical cables where the product is to
be mounted.
Wall fixings
The screws and wall plugs provided are suitable
for most brick walls. However, if the wall is
constructed of plasterboard or soft building block
the appropriate fixings should be used.
Water quality
In hard water areas, a suitable water treatment
system should be provided to prevent limescale
deposits (calcium deposits) which may eect the
long term appearance of the product. Exterior
surfaces should be gently wiped with a dry soft
cloth after use to minimise water stains and
limescale deposits.
Important
Do not fit accessories with loose glass or ceramic/
porcelain/fine bone china in shower cubicles or
over baths.
Not to scale
118mm
Ø50mm
25mm 145mm
3
INSTALLATION
1 Remove the ceramic soap dish from
the holder.
2 Place the ceramic soap dish holder on to the
mounting surface.
3 Mark the hole positions on the mounting
surface. Use a spirit level to ensure the holes
are vertically aligned.
4 Drill holes using a suitably sized drill bit for the
wall plugs supplied. If alternate fixings are to
be used then drill holes to suit these fixings.
5 Insert the wall plugs into the holes.
6 Secure the soap dish holder using screws.
7 Place the ceramic soap dish into the holder.
Whilst every effort is made to ensure the accuracy of these, they are subject to change without
notice as part of the companys product development process. The use of trademarks, product design
and artwork is subject to licence or agreement with LBIP Ltd. The design registrations, trademark registrations
and copyrights are protected by law and the use or reproduction outside the terms of an agreement is prohibited.
The right to modify designs and dimensions is reserved. LBIP Ltd is a member of ACID (Anti Copying in Design). E&OE
© LBIP Ltd 2022
CONTRACT ENQUIRIES
+44 (0)1992 708 316
info@lefroybrooks.co.uk
CUSTOMER SERVICE, SPARES & TECHNICAL ENQUIRIES
+44 (0)1902 390 894
technical@lefroybrooks.co.uk
LEFROYBROOKS.CO.UK
20.065.338A / MAY 2022
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Lefroy Brooks LB 4937 Installation & Servicing Guide

Type
Installation & Servicing Guide

Lefroy Brooks LB 4937 is a soap dish with a ceramic soap dish and holder. It is designed to be installed on a wall and comes with screws and wall plugs for easy installation. The soap dish is not suitable for use in shower cubicles or over baths with loose glass or ceramic/porcelain/fine bone china. It is recommended that the soap dish be installed by a fully qualified professional to ensure proper installation and to avoid any damage to the wall or the soap dish.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI