Eonon D3101M User manual

www.eonon.com

Option

System

Clock

2. Audio

3.Video Quality setup

4. Preference page

IR

FM

ACC+(RE D)

GND(BLA CK)

2.Open the door and connect the yellow“+ black - trigger wire with door

trigger on the car, and press the DOOR button on the unit. if lamp is on , please

connect blue“-” lamp trigger wire with the car door trigger.

” “ ”

BRIGHTNESS/CONTRAST/COLOUR/HUE

Select the one of BRIGHTNESS/CONTRAST/COLOUR/HUE and change the

picture condition as your taste,

1、Bring up the on-screen function menu by pressing

the MENU button on the unit or the TFT MENU button

on the remote control.

2、Select the desired menu by pressing the MENU

button on the unit or the TFT MENU button on the

remote control .

3、Change the figure of desired function to adjust

Contrast, Brightness, Color TEMP, etc.

1、Bring up the on-screen function menu by pressing the MENU button on

the unit or the TFT MENU button on the remote control.

2、Select the mode Source SEL,ZOOM by pressing

the menu button on the unit or TFT menu button on

the remote control.

3、 Control the desired mode by pressing the /

buttons on the unit or the / buttons on the

remote control as you want.

4、RESET.

OPTION

PICTURE Control

Listen to the audio portion of the disk through your IR headphone, You can

select A or B channel for IR headphone.

1、Bring up the on-screen function menu by pressing

the MENU button on the unit or the TFT MENU button

on the remote control.

2、Select “Audio Control”.

3、Press the / button on the unit or / button

on the remote control to select the A or B IR channel

at your choice,

Listening to the audio portion of the disk through your automotive speakers.

1、Bring up the on-screen function menu by pressing the

MENU button on the unit or the TFT MENU button on the

remote control.

2、Select the desired menu by pressing the menu button

on the unit or the TFT MENU button on the remote control.

3、Adjust the Radio frequency from 87.7MHZ ~ 89.1 MHZ

by pressing the / on the unit or the / buttons on

the remote control.

VOLUME

SYSTEM

1、Bring up the on-screen function menu by pressing the MENU button on

the unit or the TFT MENU button on the remote control.

2、Select the LANGUAGE ,S-COLOR by pressing

the menu button on the unit or the TFT menu button

on the remote control.

3、Control the desired OSD and color by pressing

the / buttons on the unit or the / buttons

on the remote control .

1、Bring up the on-screen function menu by pressing the MENU button on

the unit or the TFT MENU button on the remote control.

2、Select the last choice CLOCK to setting the

machine state as your prefer.

3、Than filled in a figure of the SLEEP,TIME,

OFF-TIME,ON-TIME by click your remote control

or pressing the / buttons on the

unit or the / buttons on the remote control .

CLOCK

SYSTEM

Captions

G.

2. AUDIO

3.VIDEO PAGE

Eonon D3101M User manual

Eonon D3101M User manual

Other documents