Schacht Ladybug Lazy Kate is an accessory for the Ladybug Spinning Wheel that makes it easy to carry bobbins along with your spinning wheel. It attaches to the front leg of the spinning wheel and includes two bobbin rods, a pulley rod, four O-ring pulleys, four O-rings, and three rod collars with set screws.

The bobbin rods can be secured using the push nuts and the pulley rod is held in place by the rod collars and set screws. O-ring pulleys are then installed on the pulley rod and O-rings are used to tension the bobbins for plying. Cap nuts on the ends of the bobbin rods secure the bobbins in place.