∂ç∫ å
To Y (green)/
Pb (blue)/Pr (red)
component video
connectors
To S-video
input
connector
on the TV
To analog audio
input connectors
(red/white) on the TV
To video
input
connector
(yellow)
on the TV To power outlet
(AC 120V/60Hz)
DVD 27 CONNECTION GUIDE
Connecting to a TV Only
When using the DVD 27 with a television but no audio receiver or processor, connect it as follows. Make the Analog Audio
Connection åand one of the Video Connections (Composite Video ∫,S-Video çor Component Video ∂). Remember
to plug in the power cord.
IMPORTANT NOTE: Make certain that any device being connected, including the DVD 27, your receiver or processor and your
TV or video display, is turned off whenever you make connections between products.
DVD27WebDiagrams1 1/19/06 2:15 PM Page 4
Downloaded from www.Manualslib.com manuals search engine
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- dansk: Harman Kardon DVD 27