Front Runner KRLS004T Installation guide

Brand
Front Runner
Model
KRLS004T
Type
Installation guide

This manual is also suitable for

Front Runner KRLS004T The Front Runner KRLS004T is a versatile and durable sliding drawer system designed to enhance the functionality and organization of your vehicle. Constructed from high-strength aluminum, it features a telescopic design that allows for smooth and effortless extension, providing easy access to your gear.

With a load capacity of up to 200 lbs, the Front Runner KRLS004T can accommodate a wide range of items, making it suitable for various applications, including camping, overlanding, and everyday storage. Its robust construction ensures that your belongings remain protected from the elements and potential damage during off-road adventures.

Front Runner KRLS004T The Front Runner KRLS004T is a versatile and durable sliding drawer system designed to enhance the functionality and organization of your vehicle. Constructed from high-strength aluminum, it features a telescopic design that allows for smooth and effortless extension, providing easy access to your gear.

With a load capacity of up to 200 lbs, the Front Runner KRLS004T can accommodate a wide range of items, making it suitable for various applications, including camping, overlanding, and everyday storage. Its robust construction ensures that your belongings remain protected from the elements and potential damage during off-road adventures.

FALS001_REV_A00 © 2022 FRONT RUNNER VEHICLE OUTFITTERS
front runner
FALS001
ENG
1
Thank you for purchasing a Front Runner Foot / Leitner Cargo System.
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the included components.
Refer to Page 2 for a list of all the components, quantities and tools required.
READ ME !
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
Please call us if you have any questions about the installation of this product.
FOOT / LEITNER CARGO SYSTEM
FALS001_REV_A00 © 2022 FRONT RUNNER VEHICLE OUTFITTERS
2
TOOLS NEEDED
FIGURE 1.1
CHECK ONLINE FOR THE LATEST FITMENT GUIDE WWW.FRONTRUNNEROUTFITTERS.COM
GET ORGANIZED
1
IN THE BOX
1 2 X Foot Assembly
2 4 X M8 x 20 Hex Head Bolt
3 8 X M8 Nyloc Nut
4 8 X M8 Nut Cap
5 1 X Stud Plate
6 4 X M8 x 16 x 1.6 Flat Washer
13mm
6
3
4
2
3
4
1
5
FALS001_REV_A00 © 2022 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE
2
2.1
2.2
2.3
Twist and break free the Stud Plate Assmbly
from each other and slide them is as shown.
Loosly assemble the feet to the extrusion as
shown.
Loosly fit your roof rack to the Feet using
M8 x 20 Hex Bolts, M8 x 16 x 1.6SS Flat
Washers and M8 Nyloc Nuts (Items 2, 3 & 6)
as shown.
Center the Feet (Item 1) front to back and
fully tighten.
Center the roof rack left to right and fully
tighten.
Place M8 Nut Caps (Item 4) over all Hex
Bolts.
5
3
1
3
5
2
6
4
3
Outside
Inside
Outside
Inside
Tightening Torque:
M8 : 15-20Nm / 11.06 ft lb - 14.75 ft lb
13mm
13mm
FALS001_REV _A00 © 2022 FRONT RUNNER VEHICLE OUTFITTERS
4
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
4
Now's the time to visit your favorite Front Runner Dealer in person or online.
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam
Share your adventures on:
FINISH
3
Congratulations! You did it. Take a step back and admire your work!
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Front Runner KRLS004T Installation guide

Brand
Front Runner
Model
KRLS004T
Type
Installation guide
This manual is also suitable for

Front Runner KRLS004T The Front Runner KRLS004T is a versatile and durable sliding drawer system designed to enhance the functionality and organization of your vehicle. Constructed from high-strength aluminum, it features a telescopic design that allows for smooth and effortless extension, providing easy access to your gear.

With a load capacity of up to 200 lbs, the Front Runner KRLS004T can accommodate a wide range of items, making it suitable for various applications, including camping, overlanding, and everyday storage. Its robust construction ensures that your belongings remain protected from the elements and potential damage during off-road adventures.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents