Instruction manual
8
Tip: Pay attention to the care label recommendations on your clothes. We recommend testing on
materials such as acrylic or other synthetic fabrics. Try testing on a small hidden area of the garment
to ensure that the material responds well.
Use
Hang your garment on a hanger.
Plug in the appliance and a red light will flash when the steamer is heating. Once the button flashes
green, the appliance is ready to use steam. The button will remain green when using steam.
When using the appliance, keep it upright. Move the head from the top to the bottom along the
garment.
You can use the tips provided to allow better opening of the fibers and good steam penetration.
For best results, make sure the fabric to be straightened is stretched during the straightening
process.
Note: Before removing or inserting a nozzle, always unplug the appliance and make sure it is cool.
After use, unplug the appliance.
Remove the tank and empty it. Then put it back in its place.
Caution: The head and base of the appliance remain hot for 20 to 30 minutes. Be sure to place the
unit on a heat-resistant surface.
Once it has cooled down completely, you can store it in its usual place.
MAINTENANCE AND CLEANING
CAUTION: Always unplug the appliance from the mains before cleaning or servicing and allow it to
cool for at least 30 minutes.
Never immerse the appliance or power cord in water or any other liquid.
Do not use abrasive products to clean the appliance.
Unplug the appliance from the wall socket and allow it to cool down completely.
Any deposits and other residues on the head of the steamer can be removed with a cloth soaked in
a solution or mixture of white vinegar/water.
Descaling:
Fill the tank with 50% water and 50% white vinegar and then use your appliance as described below
until the tank is empty.
To clean the steamer: wipe with a slightly damp cloth. Do not use solvents.
Never use abrasive products to clean the soleplate and nozzles.
Keep the soleplate smooth, avoid contact with metal objects.