SpeakerCraft PROFILE CRS6 ONE, CRS6 Three, PROFILE CRS6 THREE, PROFILE CRS6 TWO Datasheet

  • Hello! I am an AI chatbot trained to assist you with the SpeakerCraft PROFILE CRS6 ONE Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
For years the CRS6 has been the most popular series in our entire line. Delivering amazing sound
quality in a compact, flush-mounted enclosure, these speakers began the move into ceiling
installations that changed the entire industry. Because we rarely notice the vents, lights, sprinklers
or anything else over our heads, putting the speaker in the ceiling was only natural.
These speakers also offer technology that makes them unique in the way they disperse music or
movie soundtracks in the room. First of all, the tweeter pivots to allow you to aim the critical high
frequencies at the listening area. We also created the WavePlane® which, supports the tweeter
and keeps those same high frequencies from bouncing off the woofer. This means better sound
and more uniform coverage throughout the room.
Discover why so many people have chosen the CRS6 to fill their home with music.
CRS6 Series
Our speakers sound much better off-axis!
CRS6 Four
612" Aluminum/Magnesium Cone Woofer with
Dual Voice Coil and Rubber Surround
Pivoting 1" Aluminum/Magnesium Dome
Tweeter with Neodymium Magnet
Front Mounted Switches Allow for up to ±3dB
of Bass and Treble Adjustment
Timbre-Matched to All Four Series
Efficiency: 90dB 1W/1m
Frequency Response: 37Hz - 20kHz ±2dB
CRS6 Three
612" Aluminum Cone Woofer with Dual Voice
Coil and Rubber Surround
• Pivoting 1" Liquid Cooled Aluminum Dome
Tweeter with Neodymium Magnet
Front Mounted Switches Allow for up to ±3dB
of Bass and Treble Adjustment
Timbre-Matched to All Three Series
Efficiency: 90dB 1W/1m
Frequency Response: 40Hz - 20kHz ±2dB
CRS6 Two
612" Glass Composite Cone Woofer with
Rubber Surround
Pivoting 1" Liquid Cooled Silk Dome Tweeter
with Neodymium Magnet
Front Mounted Switch Allows for up to ±3dB of
Treble Adjustment
Timbre-Matched to All Two Series
Efficiency: 92dB 1W/1m
Frequency Response: 40Hz - 20kHz ±2dB
CRS6 One
612" Polypropylene Cone Woofer with Rubber
Surround
Pivoting 1" Liquid Cooled Silk Dome Tweeter
with Neodymium Magnet
Timbre-Matched to All One Series
Efficiency: 92dB 1W/1m
Frequency Response: 40Hz - 20kHz ±2dB
Only SpeakerCraft offers the exclusive WavePlane™ tweeter
bafe which is located just behind the tweeter of all AIM in-ceiling
speakers. The WavePlane™ creates better high frequency
dispersion. This is accomplished by allowing the tweeter to
reect off a solid surface instead of the vibrating woofer.
Ordinary speakers only sound their best when you are directly
underneath them. This is because high frequencies are directional.
The WavePlane™ assures optimal high frequency dispersion
throughout the listening area.
CRS6 Zero
612" Aluminum Cone Woofer with Dual Voice
Coil and Rubber Surround
Pivoting 1" Liquid Cooled Aluminum Dome
Tweeter with Neodymium Magnet
Front Mounted Switches Allow for up to ±3dB
of Bass and Treble Adjustment
Timbre-Matched to All Three Series
Efficiency: 90dB 1W/1m
Frequency Response: 40Hz - 20kHz ±2dB
940 Columbia Ave., Riverside CA 92507 • USA (800) 448 0976 Fax (951) 787 8747 International +1 951 787 0543 • www.speakercraft.com
* All CRS6 Speakers come with Limited LIFETIME Warranty
* As we incorporate design improvements, specications may change without notice
/