TradeQuip Professional 2069T Owner's manual

TradeQuip Professional
Brand
TradeQuip Professional
Model
2069T
Type
Owner's manual
10/20 Product Code: 2069T
Made in China to TQB Brands Pty Ltd specifications.
Visit us at www.tqbbrands.com.au
About the TradeQuip brand
The 'TradeQuip' brand of workshop equipment, is designed for use in a demanding workshop
environment by professional users. With proven and trusted “Made for the
Trade” reliability, 'TradeQuip' branded products offer the very best in performance for an
affordable price. All backed by a 1year trade guarantee across 1,000+ distributors Australia wide.
Specifications:
• Safe Working Capacity: 900kgs
• Min Lift Radius: 930mm
• Max Lift Radius: 1295mm
• Max Lift Height: 1800mm
• Working Rotation: 360˚
• Swivel Base Plate: 270 x 270mm
SWIVEL BASE
UTILITY CRANE
Product Code: 2069T
SWIVEL BASE
UTILITY CRANE
10/20 Product Code: 2069T
Made in China to TQB Brands Pty Ltd specifications.
Visit us at www.tqbbrands.com.au Page | 2
WARNING
IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE
WARNING
The instructions and warnings contained in this manual should be read and understood before using or operating this equipment.
Do not allow anyone to use or operate this equipment until they have read this manual and have developed a thorough
understanding of how this equipment works. Failure to observe any of the instructions contained in the manual could result in
severe personal injury to the user or bystanders, or cause damage to the equipment and property. Keep this manual in a
convenient and safe place for future reference.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the TQB Brands Pty Ltd policy of
continuous improvement determines the right to make modifications without prior warning.
CONTENT
WARNING ............................................................................................................................................................................... 2
CONTENT ................................................................................................................................................................................ 2
STANDARD OPERATING PROCEDURE ..................................................................................................................................... 3
ASSEMBLY, OPERATION, PREVENTITIVE MAINTENANCE ........................................................................................................ 4
PARTS DIAGRAM .................................................................................................................................................................... 6
PARTS LIST .............................................................................................................................................................................. 7
WARRANTY ............................................................................................................................................................................ 8
10/20 Product Code: 2069T
Made in China to TQB Brands Pty Ltd specifications.
Visit us at www.tqbbrands.com.au Page | 3
PRE-OPERATIONAL SAFETY CHECKS
• Before using this hydraulic crane ensure it is in sound condition, and good working order.
• Always inspect the chain and hook prior to use.
• Replace or repair damaged parts. Use recommended parts only. Non-authorised parts may be dangerous and will invalidate
the warranty.
• Use on a firm, level surface capable of sustaining the hydraulic crane lift and the load.
• Operators should maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
• Ensure all non-essential persons keep a safe distance whilst the crane is in use.
• Stay alert, watch what you are doing and use common sense when operating a ute crane. Do not use a ute crane while you
are tired or under the influence of drugs, alcohol or medication.
• Always make sure the vehicle is in park, the engine is off, the parking brake is set and the wheels are chocked before use.
• Always ensure the vehicle and the load is stable.
• Keep the crane clean for best and safest performance.
POTENTIAL HAZARDS
• DO NOT exceed the safe working capacity 900kg load when fully retracted and 450kg when fully extended.
• DO NOT operate the hydraulic pump beyond the rated capacity.
• DO NOT lift an object when the vehicle is in motion.
• ENSURE the crane is properly bolted to the truck bed and that it can hold the load.
• DO NOT come between the crane and the load when operating.
• DO NOT fully extend the cable while pulling a load, keep 4 complete turns of cable around the winch module.
• DO NOT operate winch if cable shows any signs of weakening, is knotted or kinked.
• DO NOT fully extend the cable winch under load.
• DO NOT operate the crane with loose connections or if damaged.
• DO NOT allow untrained persons to operate the crane.
• DO NOT use the crane to lift or support personnel.
DANGER: DO NOT stand beneath, in front of, or to close to the side of the load.
INTENDED USE
Mounts in the bed of a truck or Ute or on a loading dock. Designed to raise, lower and manoeuvrer (not support) heavy loads
with minimal effort.
STANDARD OPERATING PROCEDURE
DO NOT use this machine unless you have been trained and assessed to a competent level in its sate use and operation,
and have been given permission to use this
DO NOT tilt the unit
10/20 Product Code: 2069T
Made in China to TQB Brands Pty Ltd specifications.
Visit us at www.tqbbrands.com.au Page | 4
ASSEMBLY, OPERATION, PREVENTITIVE MAINTENANCE
1. FEATURES
This TradeQuip hydraulic utility crane provides the lifting power to lift a 900kg load when fully retracted and 450kg when fully
extended. The boom pivots 360˚ at the base for easy loading and unloading. The boom extends from 930mm to 1295mm
and the base swivels to help you get the best angle when hoisting items into your utility bed. Saves time and effort loading
and unloading cargo from a ute, truck or dock. Get extra lift where you need it most with this utility crane that easily lifts
loads to 900kg. The utility crane also folds down when not in use.
2. ASSEMBLY
Unpacking: after removing the packing material, make sure the product is in perfect condition and that there are no visible
damaged parts.
1. Place the Bearing (#29) into the Bearing Sleeve (#30), then assemble into the Base (#32).
2. Assemble the Turntable (#24) onto the Bearing (#29) so that the Turntable (#28) and Base (#32) join together. Rotate
the Turntable (#28) onto the Base (#32) and ensure the assembly is stable.
3. Assemble the Grease Fitting (#31), Binding Bolt (#34), and Bakelite Nut (#33) onto the Base (#32).
4. Assemble the Bearing (#41) into the hole of the Large Pulley (#4), then using the Bolt M16x110 (#42) connect the Post
Weldment (#5) and Boom (#9). At the same time insert the Bushing (#3) and assembled Large Pulley (#4) ensuring the
assembled Large Pulley is centred, then tighten with a Flat Washer (#24), Lock Washer (#23) and Nut M16 (#22).
5. Assemble the Ram (#25) onto Boom (#9) using Bolt M16x80 (#21), Flat Washer (#24), Lock Washer (#23) and Nut M16
(#22). Assemble the bottom of the Ram (#25) onto the Post Weldment (#5), using Bolt M16x90 (#26), Flat Washer
(#24), Lock Washer (#23) and Nut (#22).
6. Assemble the Winch (#1) onto the Post Weldment (#5) by tightening 3 x Bolt M10x20 (#37), Lock Washer (#38), Flat
Washer (#39).
7. Put the Handle Cover (#36) onto the long end of Handle (#35), then insert the handle into the hollow sleeve on the Post
Weldment (#5), lock with the R-Pin (#40).
8. Assemble the Bearing (#17) into the Small Pulley (#16), then insert the Bolt M12x85 (#12) through the Boom Extension
(#11), Bearing (#17), and tighten using Flat Washer (#15), Lock Washer (#14) and Nut M12 (#13).
9. Fix the Base (#32), then put the Post Subassembly onto the Base Subassembly, connect using 6x Bolts M12x40 (#27),
Lock Washer (#14), Flat Washer (#15), and Nut M12 (#13).
10. Insert the Boom Extension Subassembly into the Boom Subassembly and lock using Bolt M14x100 (#10), Lock Washer
(#7), Flat Washer (#8) and Nut M14 (#6).
11. Insert one end of the Winch Wire (#2) through the Small Pulley (#16), Boom Extension (#11), Boom (#9) and large Pulley
(#4), then coil on the rope roll of the Winch (#1). Lock the wire into place on the side plate of the Winch by inserting it
through the four holes on the side plate.
10/20 Product Code: 2069T
Made in China to TQB Brands Pty Ltd specifications.
Visit us at www.tqbbrands.com.au Page | 5
3. BEFORE USE
Prior to each use conduct a visual inspection by checking for abnormal conditions, such as cracked joints and damaged,
loose, or missing parts.
4. OPERATION
To Raise: Turn the release valve to the right.
To Lower: Turn the release valve slowly to the left.
To Add Oil: Fully collapse the jack and add oil to increase oil level up to oil plug
NOTE: ONLY USE HYDRAULIC JACK OIL.
Caution: This product is intended for lifting purpose only, not for supporting loads. Promptly support and secure the load
immediately after lifting.
DO NOT overload this crane beyond its rated capacity.
• DO NOT exceed the safe working capacity 900kg load when fully retracted and 450kg when fully extended.
• DO NOT operate the hydraulic pump beyond the rated capacity.
• DO NOT lift an object when the vehicle is in motion.
• ENSURE the crane is properly bolted to the truck bed and that it can hold the load.
• DO NOT come between the crane and the load when operating.
• DO NOT fully extend the cable while pulling a load, keep 4 complete turns of cable around the winch module.
• DO NOT operate winch if cable shows any signs of weakening, is knotted or kinked.
• DO NOT fully extend the cable winch under load.
5. STORAGE
Crane boom must always be stored and secured in the down position when not in use. This is to protect the chrome ram from
elements/corrosion etc and to safely drive the vehicle without having the boom swing around dangerously.
This Hydraulic Utility Crane should always be stored under cover in a dry location and on a level surface.
6. MAINTENANCE
Replace or repair damaged parts. Use recommended TradeQuip genuine parts only. Non authorised parts may be
dangerous and will invalidate the warranty.
If any abnormal vibrations or noise occurs, stop using the crane immediately and contact an authorised repair facility.
Cleaning: Use only spray cleaner and a damp cloth to clean the utility crane.
Lubrication: Follow the instruction for lubricating and changing accessories. The handle must be kept clean and free from
oil and grease at all times.
7. SERVICE & REPAIR
Any Hydraulic Utility Crane found damaged in any way, or found to be worn or operates abnormally should be removed from
service until repaired by an authorised service agent. Owners and / or operators should be aware that repair of this product
may require specialised equipment and knowledge. Only authorised parts, labels and decals shall be used on this equipment.
Annual inspection of the hydraulic lift is recommended and can be made by an authorised repair facility to ensure that your
equipment is in optimum condition and that the equipment has the correct decals and safety labels specified by the
manufacturer.
10/20 Product Code: 2069T
Made in China to TQB Brands Pty Ltd specifications.
Visit us at www.tqbbrands.com.au Page | 6
PARTS DIAGRAM
10/20 Product Code: 2069T
Made in China to TQB Brands Pty Ltd specifications.
Visit us at www.tqbbrands.com.au Page | 7
PARTS LIST
Part #
Description
QTY
Part #
Description
QTY
1
Winch Assembly
1
23
Lock Washer ˚16
3
2
Winch Wire
1
24
Flat Washer ˚16
3
3
Bushing
1
25
Ram
1
4
Large Pulley
1
26
Bolt M16x90
1
5
Post Weldment
1
27
Bolt M12x40
6
6
Nut M14
1
28
Turntable
1
7
Lock Washer ˚14
1
29
Bearing ˚14
1
8
Flat Washer ˚14
1
30
Bearing Sleeve
1
9
Boom
1
31
Grease Fitting
1
10
Bolt M14x100
1
32
Base
1
11
Boom Extension
1
33
Bakelite Nut
1
12
Bolt M12x85
1
34
Binding Bolt
1
13
Nut M12
7
35
Handle
1
14
Lock Washer ˚12
7
36
Handle Cover
1
15
Flat Washer ˚12
7
37
Bolt M10x20
3
16
Small Pulley
1
38
Lock Washer ˚10
3
17
Bearing
1
39
Flat Washer ˚10
3
18
Wire Clamp
2
40
R pin
1
19
Hook Subassembly
1
41
Bearing
1
20
Hook with Bolt
1
42
Blot M16x110
1
21
Bolt M16x80
1
43
Bearing
1
22
Nut M16
3
44
Ram Handle
1
10/20 Product Code: 2069T
Made in China to TQB Brands Pty Ltd specifications.
Visit us at www.tqbbrands.com.au Page | 8
WARRANTY
TradeQuip products have been carefully tested and inspected before shipment and are guaranteed to be free from defective
materials and workmanship for a period of 12 months from the date of purchase except where tools are hired out when the
guarantee period is ninety days from the date of purchase.
Should the machine develop any fault, please return the complete tool to your nearest authorised warranty repair agent or contact
TQB Brands Pty Ltd Warranty team – warranty@tqbbrands.com.au.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship, repairs will be carried out free
of charge. This guarantee does not apply to normal wear and tear, nor does it cover any damage caused by misuse, careless or
unsafe handling, alterations, accident, or repairs attempted or made by any personnel other than the authorised TQB Brands Pty
Ltd repair agent.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised.
Your TQB Brands Pty Ltd guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your
proof of purchase within the 12 month period.
Consumer Guarantee
Our goods come with a guarantee that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have
the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
All images and illustrations shown are for reference purposes only. All information, specifications and illustrations in this manual are based on
the latest information available at the time of publication and are subject to change without notice. The information in this manual is periodically
revised to ensure the latest information is included. Download the latest version of this manual and other related technical documentation from
www.tqbbrands.com.au
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

TradeQuip Professional 2069T Owner's manual

TradeQuip Professional
Brand
TradeQuip Professional
Model
2069T
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents