Sub-Zero BI-36UG/O-RH Reference guide

Sub-Zero
Brand
Sub-Zero
Model
BI-36UG/O-RH
Category
Fridges
Type
Reference guide
36" Built-In Over-and-Under with Glass Door
subzero.com
ACCESSORIES
• Grilles for 83" or 88" finished height
(84" is standard).
• Flush inset and dual flush inset panels
in stainless steel with tubular or pro
handles.
• Side panel in white or stainless steel.
• Stainless steel tubular and pro handles.
• Full-length standard and extended
framed handles.
• Stainless steel kickplate.
• Dual installation kit with or without dual
wide grille—84" finished height.
• Dozen egg container.
• Replacement air purification cartridge
and water filter.
Accessories avail able through an authorized
Sub-Zero dealer. For local dealer informa-
tion, visit the find a showroom section of our
website, subzero.com.
FEATURES
• Four design options: framed, overlay,
flush inset and stainless steel.
• Triple-pane, UV-resistant glass door—
high altitude glass available.
• Dual refrigeration system ensures the
freshest food and energy efficiency.
• Electronic microprocessor constantly
monitors entire unit to ensure proper
food storage environment.
• Air purification system reduces odors,
bacteria, viruses and ethylene gas.
• Advanced water filtration system.
• Illuminated touch control panel.
• Bright interior lighting throughout,
including storage drawer area.
• Adjustable spill-proof glass shelves.
• Crisper and deli drawers form a lower-
temperature zone.
• Soft-close glide system on refrigerator
storage drawers.
• Easy-access flip-up grille.
• Informational freshness cards.
• Full-extension, roll-out freezer drawer.
• Automatic ice maker with max ice
feature temporarily increases produc-
tion.
MODEL OPTIONS
Overlay (framed, flush inset) BI-36UG/O
Stainless (tubular handle) BI-36UG/S/TH
Stainless (pro handle) BI-36UG/S/PH
Specify RH or LH door.
INTERIOR FEATURES
REFRIGERATOR
3 Adjustable glass shelves
1 Stationary glass shelf
1 High-humidity drawer with dividers
1 Storage drawer with dividers
FREEZER
Full-extension roll-out freezer drawer
Two-tier wire storage baskets
Automatic ice maker
Model BI-36UG
36" (914)
84"
(2134)
4" (102)
50
3
/
4
"
(1289)
23"
(584)
23
7
/8"
(606)
23
5
/8"
(600)
37
1
/4"
(946)
23
7
/8" (606)
2
3
/8" (60)
HEIGHT DIMENSIONS ±
1
/2" (13)
26
3
/16" (665)
14
1
/8"
(359)
36" Built-In Over-and-Under with Glass Door
subzero.com
STANDARD INSTALLATION FLUSH INSET INSTALLATION
DIMENSIONS
©Sub-Zero, Inc. all rights reserved. 9/2014
83
3
/4"
(2127)
OPENING
HEIGHT
24" (610)
OPENING
DEPTH
NOTE: Shaded line represents profile of unit.
FRONT VIEW
SIDE
VIEW
TOP VIEW
W
OPENING WIDTH
84"
(2134)
FLUSH
INSET
HEIGHT
1
/4"
(6)
26
3
/16"
(665)
FLUSH
INSET
DEPTH
2
3
/16"
(56)
*3
" (76) typical depth. Shaded areas will be visible and should be finished to match cabinetry.
NOTE: Shaded line represents profile of unit with
3
/4" (19) panel.
FRONT VIEW
SIDE
VIEW
TOP VIEW
FINISHED
CLEATS*
1
1
/
4
"
(32)
W
FLUSH INSET WIDTH
4" (102)
1
1
/4"
(32)
2
3
/16"
(56)
3"
(76)*
TYPICAL
75
1
/2" (1918)
FROM FLOOR
7"
(178)
E
6"
(152)
RIGHT SIDE
OF OPENING
ELECTRICAL
3" (76)
18" (457)
6" (152)
RIGHT SIDE
OF OPENING
AREA EXTENDS
1
/2" (13)
FORWARD ON FLOOR
PLUMBING
SPECIFICATIONS
PRODUCT
Dimensions 36"W x 84"H x 24"D
Door Clearance
37
3
/4"
Weight 515 lb
CAPACITY
Refrigerator 16.3 cu ft
Freezer 5.3 cu ft
ELECTRICAL
Supply 115 VAC, 60 Hz
Service 15 amp circuit
PLUMBING
Supply
1
/4" OD copper, braided
stainless steel or PEX tubing
Pressure
35–120 psi
Specifications are subject to change without
notice. Visit subzero.com/specs for the most
up-to-date information.
Dimensions may vary ±
1
/8" (3). Dimensions in
parentheses are millimeters unless otherwise
specified.
38" (965)35
1
/2" (902)
Dimensions based on stainless steel model. For flush inset, add
1
/2" (13) to door clearance dimensions.
  • Page 1 1
  • Page 2 2

Sub-Zero BI-36UG/O-RH Reference guide

Sub-Zero
Brand
Sub-Zero
Model
BI-36UG/O-RH
Category
Fridges
Type
Reference guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents