SuperLine IAD Model 6512 Quick Installation
Document Number 6512-A2-GN70-00 September 1999
This sheet shows a typical way to use the SuperLine IAD. If you want more information, see the Installation Instructions.
Copyright 1999 Paradyne Corporation
*6512–A2–GN70–00*
R
TST
LINE
ALMPWR
ETHERNET
T
M
T
M
SuperLine IAD
(Filter not required)
R
99-16510a
Decide what wall jack you will use for your new phone lines. Plug a phone
filter into every other jack where you have existing phones and other devices
attached to the same phone line that the SuperLine IAD will be. (Do not
connect a filter to any device you plug into the SuperLine IAD.) Devices may
include wall phones, cordless phones, answering machines, fax machines,
modems, caller ID display devices, security alarm systems, TV-based
Internet access devices, and direct broadcast satellite receivers. Contact
your service provider if you need more filters.
Phone 1/2
Modem
LINE
PHONE
99-16510d
Connect a phone or other device (such as the line jack of a modem) into the
PHONE 1/2 jack.
99-16510b
Wall
Jack
Line
Go to the room where you want your new phone lines. Plug the phone cord
that came with the SuperLine IAD into the wall jack. Plug the other end of
the phone cord into the LINE jack on the back of the SuperLine IAD.
99-165510e
Phone 2
Fax
If you have service for two extra lines, connect a phone or other device (such
as the line jack of a fax machine) into the PHONE 2 jack.
99-16510c
Base Phone
Existing
Phone
Plug your existing phone into the BASE PHONE jack.
Power
99-165510f
Plug the power transformer into the POWER jack and an ac outlet.