2. Western
  3. Spinner Leveling Kit #95477

Western Spinner Leveling Kit #95477 Installation guide

  • I have reviewed the installation instructions for the Western 95477 Leveling Kit. This document outlines how to balance the spinner using leveling bars and secure them with a hex cap screw and locknut. I'm ready to answer any questions you might have about this leveling kit and its installation process.
  • What is the first step in installation?
    How do you secure the leveling bars?
95477 LEVELING KIT INSTALLATION
SAFETY PROCEDURES INSTALLATION INSTRUCTIONS
1. Stack the leveling bars until the spinner is balanced.
2. Secure with the provided 5/16" x 2-1/4" hex cap
screw and 5/16" locknut.
The company reserves the right under its product improvement policy to change construction or design details and furnish equipment when so
altered without reference to illustrations or specifications used.
CAUTION
Read instructions before performing
modifications. Use standard methods and
practices when working on spreader including
wearing proper personal protective safety
equipment.
5/16" x 2-1/4"
Hex Cap Screw
Bar
Leveling Bar
5/16" Hex Locknut
Lit. No. 95492 Printed in USA May 15, 2003
/