Brother HL-L9430CDN User guide

Brand: Brother

Model: HL-L9430CDN

Type: User guide

Mass Deployment Tool

User’s Guide

ENG

Version K

Information in this document is subject to change without notice. The software described in this document is

furnished under a license agreement. The software may be used or copied only in accordance with the terms of

those agreements. No part of this publication can be reproduced in any form or by any means without prior written

permission of Brother Industries, Ltd.

Brother is either a trademark or a registered trademark of Brother Industries, Ltd.

Any trade names and product names of companies appearing on Brother products, related documents and any

other materials are all trademarks or registered trademarks of those respective companies.

• The screens or images in this User's Guide are for illustration purposes only and may differ from those of the

actual products.

• The contents of this document and the specifications of this product are subject to change without notice.

Trademark

Important Notes

1 Introduction............................................................................................................................................. 1

1.1 Overview .................................................................................................................................. 1

1.2 System Requirements .............................................................................................................. 2

1.3 Preparation............................................................................................................................... 2

2 Main Functions of the Mass Deployment Tool (GUI).............................................................................. 3

2.1 Update the Device List ............................................................................................................. 3

2.2 Check Device Notifications....................................................................................................... 5

2.3 Use Deployment Profiles.......................................................................................................... 6

2.3.1 Import Deployment Profiles ............................................................................................. 6

2.3.2 Export Deployment Profiles ............................................................................................. 7

2.4 Open the Setting File Editor ..................................................................................................... 7

2.5 Send Files ................................................................................................................................ 7

2.6 Back Up Settings...................................................................................................................... 9

2.7 Set Password ......................................................................................................................... 10

3 Additional Functions of the Mass Deployment Tool (GUI).................................................................... 12

3.1 Application Settings................................................................................................................ 12

3.1.1 Configure the Network Settings ..................................................................................... 12

3.1.2 Configure the Device Discovery Settings....................................................................... 13

3.1.3 Link the Mass Deployment Tool to BRAdmin Professional 4......................................... 13

3.1.4 Application Information .................................................................................................. 13

3.2 Activate Solutions................................................................................................................... 14

4 Command Line Interface (CLI) ............................................................................................................. 15

4.1 Use CLI in the Mass Deployment Tool................................................................................... 15

4.2 Commands and Options......................................................................................................... 16

4.2.1 Commands .................................................................................................................... 16

4.2.2 Device Identifiers ........................................................................................................... 22

4.2.3 Options .......................................................................................................................... 23

4.2.4 Deployment Profile ........................................................................................................ 25

4.2.5 Deploy Key File.............................................................................................................. 27

4.2.6 Create the ETKN File..................................................................................................... 28

5 Create Settings Files ............................................................................................................................ 29

5.1 Settings Files.......................................................................................................................... 29

5.2 JSON Files ............................................................................................................................. 29

5.3 Create JSON Files ................................................................................................................. 30

6 Setting File Editor ................................................................................................................................. 31

7 Troubleshooting.................................................................................................................................... 34

Appendix................................................................................................................................................... 36

Table of Contents

1.1 Overview

The Mass Deployment Tool provides a configuration interface to help you manage a variety of Brother device

settings, and allows users to install and manage multiple USB-connected or network-connected devices, without

having to install any additional software. The tool has two independent interfaces:

●Graphical User Interface (GUI)

●Command Line Interface (CLI)

The main functions of this tool are:

●Manage multiple devices using a deployment profile that consists of device information or settings

●Deploy settings files to the target devices

●Retrieve settings from target devices

If you are also using BRAdmin Professional 4, you can link the Mass Deployment Tool to BRAdmin

Professional 4 and use its device information and application settings:

- During the first launch of the Mass Deployment Tool

- In the Mass Deployment Tool's Application settings > Operation mode

For more information, see 3.1 Application Settings.

The intended users of this tool are:

●Pre-sales and post-sales engineers

●Installation engineers who install devices in customer environments

●Channel engineers who manage customer devices remotely

●IT administrators at end-user companies with their own device administration systems

1 Introduction

1.2 System Requirements

1.3 Preparation

1. Download the latest version of the Mass Deployment Tool from the Brother support website at

support.brother.com.

2. Copy the contents of the downloaded file into the folder you want.

Make sure you know which schema file is supported by your Brother model. For a list of available schema

files and applicable models, double-click the README.url file in the “Schema” folder to open the README

website. You will need this information later.

3. To run the tool, do one of the following:

●For the Graphical User Interface (GUI)

Double-click the MassDeploymentTool.exe file in the “MassDeploymentTool” folder.

For BRAdmin Professional 4 users

- To link the Mass Deployment Tool to BRAdmin and use its device information and application settings,

select Import the device list database and application settings from BRAdmin Professional 4. in the

dialog box that appears when you first launch the Mass Deployment Tool. To link it later, go to

Application settings > Operation mode.

- If your BRAdmin application is password-protected, you must type the password.

●For the Command Line Interface (CLI)

At your Command Prompt, run the settingcmd.exe file in the “SettingCommand” folder.

We recommend changing the default login password to protect your machine from unauthorized access and

to use the Mass Deployment Tool securely.

For more information about changing your password, see 2.7 Set Password.

Operating Systems

Windows 10 (32-bit and 64-bit)

Windows 11 (64-bit)

Windows Server 2012 or later (64-bit)

Additional Software .NET Framework 4.8 or later

Use the Mass Deployment Tool's Graphical User Interface (GUI) to:

- Prepare and manage deployment profiles for multiple Brother devices.

- Deploy settings or send instructions to multiple Brother devices using deployment profiles.

- Change the Mass Deployment Tool's settings.

2.1 Update the Device List

No devices are displayed upon startup. Search for target devices first, and then add them to the list:

1. Click the Add devices button to display the list of devices on the Add devices screen.

If you are using the BRAdmin database, its Device list appears with Smart filters (containing the devices that

meet your filtering criteria) and Groups (containing the devices you specified) in the left pane. For more

information about Smart filters, see the BRAdmin Professional 4 User's Guide.

2. Type a keyword in the search box or click the Refresh button, if needed.

(The Refresh button is not available if you are using the BRAdmin database.)

3. Select the check boxes of the devices you want to add. If you are using the BRAdmin database, you can also

select the target Smart filter or Group in the left pane.

4. Click the Add button. The list of devices you selected appears in the tool’s main window.

2 Main Functions of the Mass Deployment Tool (GUI)

Without using the BRAdmin database Using the BRAdmin database

The following functions are available in the tool’s main window.

-Select the Setting File

Select one or more devices, click the Set file button, and then select the file you want.

-Enter a Password for Password-Protected Devices

Select one or more devices that use the same password, click the Input device password button, type the

password, and then click OK.

-Refresh the Device List

Select one or more devices and then click the Refresh button.

-Delete Devices from the Device List

Select one or more devices and click the Delete devices button.

-Sort the Device List

Click the column heading containing the sort criteria you want.

To select multiple devices, press and hold the Shift or Ctrl key on your keyboard, and left-click the devices

you want.

2.2 Check Device Notifications

The Notification column of the Device List notifies you of the results of the last-performed task of the listed

devices.

The following notifications are available:

* Available only for Activate Solutions. For more information, see 3.2 Activate Solutions.

Not found

This device was offline when the deployment profile was imported into the tool. Check the

device's connection status.

(For more information, see 2.3.1 Import Deployment Profiles.)

Completed This device completed the last-performed task successfully.

Error

This device did not complete the last-performed task successfully. See the log details, and

perform the function again if needed.

To check the log, click > Information > click the Open button under Application log:.

Not supported This device does not support this function.

Cancelled The last-performed function has been cancelled in this device.

Already set The default login password has already been changed.

Solution not

supported/

already activated

All the last-performed functions have been enabled. *

Partially complete The last-performed functions have been partially activated. *

Solution not

supported The last-performed function has not been activated as it is not supported. *

(blank) There are no notifications for this device.

2.3 Use Deployment Profiles

Deployment profiles contain paths to settings files, such as JSON files, and let you assign specific settings files to

multiple Brother devices. This feature allows you to:

- Import deployment profiles to restore specific settings files for specific devices.

- Export and save deployment profiles to let others use them to import settings from multiple Brother devices and

then send them to other devices.

Deployment profiles contain only the relative paths for settings files. To pass a set of deployment profiles and

settings files to others, you must copy both the deployment profile and any necessary settings files to ensure

that the relative path is correct.

2.3.1 Import Deployment Profiles

Import customized deployments and use them to manage multiple devices.

1. Click in the upper left and select Import profile…

2. Select the CSV file or the encrypted ZIP archive you want.

3. The tool imports the selected file and deploys the profiles it contains.

4. Make sure the device list contains all the devices you want. Add more devices if needed.

2.3.2 Export Deployment Profiles

Create and export customized deployments and use them to manage multiple devices.

1. Make sure the device list contains all the devices you want. Add more devices if needed.

2. Click and select Export profile…, or Export profile (with password)…

If you select Export Profile… and any of the target devices is password-protected, the tool notifies you that

the profile will be saved without encryption.

Click OK to continue, or click Cancel to go back and select Export profile (with password)…

3. Select the destination folder, enter the file name, and then click the Save button.

If prompted, enter the password and click the OK button.

4. The tool exports the file and saves it in CSV format.

2.4 Open the Setting File Editor

Adjust the backed-up setting files.

1. Click and select Open Setting File Editor.

To launch the Setting File Editor successfully, make sure both MassDeploymentTool.exe and

SettingFileEditor.exe have not been moved from the installation folder.

For more information, see 6 Setting File Editor.

2.5 Send Files

To send specific files (PJL, DJF, PRN files) or to deploy settings files (DPK, EDPK, JSON files) for managing

multiple target devices, do the following:

(For more information about creating settings files, see 5.3 Create JSON Files.)

1. Make sure the device list contains all the devices you want.

2. Select Send files from the drop-down list.

3. Set the file you want to send to the target devices:

a) Click the Set file button, or right-click one of the target devices

and select Set file.

b) Select the file you want and click the Open button.

(When you select a file from a USB flash drive, or if you select an

EDPK file, you must enter the password for the file.)

The selected file is set, and the name of the file appears in the File name column.

While a settings file (JSON, DPK, or EDPK) is set and its details appear on the Send files screen, you can

enter or edit the information in the text boxes of the Node name (wired), Node name (wireless), Contact,

or Location column.

4. Click the Send button in the lower right corner of the screen.

Alternatively, you can use a USB flash drive to deploy settings to a device.

1. Rename your file: “write_xxxx.edpk”, where xxxx is your original file’s name.

The EDPK file password and the device password must be the same.

2. Copy it onto a USB flash drive.

3. Insert the USB flash drive into the Brother device’s USB port.

- HL/DCP/MFC devices

aSelect Direct Print.

b The USB flash drive details appear. Select the “write_xxx.edpk” file.

c * For monochrome devices: Press Start.

* For color devices: Press either Black Start or Color Start.

- Scanners

aSelect Program Update.

b The USB flash drive details appear. Select the “write_xxx.edpk” file.

4. Your selected settings will be applied to the device. The output log file will be automatically created.

5. The Send files dialog box shows the sending progress.

To stop this operation, click the Stop button.

6. When completed, the summary results appear.

If unsuccessful, the error status is also listed in the results. Click the Open log folder button, check the log

details, and try again.

2.6 Back Up Settings

You can retrieve Brother device settings to back them up and use them later for applying the same settings to

a different device.

1. Make sure the device list contains all the devices you want.

2. Select Back up settings from the drop-down list on the upper left.

3. The Back up settings screen appears. The devices whose settings cannot be retrieved are shown as

“Not supported”.

4. Enter the device password in the Device password column, if needed.

5. Enter the path into the Save to: field or click the Browse… button to select the destination folder of the

backed-up settings file.

6. In the Backup setting items: field, select either All or Selected: to specify the necessary items.

7. Select the Exclude check box to not include the device-specific settings, such as the IP address, node name,

in the backed-up file if needed.

To remove the device-specific setting items, you can also use the Setting File Editor.

For more information, see 6 Setting File Editor.

8. Click the Back up button.

Alternatively, you can use a USB flash drive to back up device settings.

1. Prepare an EDPK file that contains the settings you want to back up.

For instructions on how to create an EDPK file, see 5 Create Settings Files.

2. Rename your file: “read_xxxx.edpk”, where xxxx is your original file’s name.

The EDPK file password and the device password must be the same.

3. Copy the renamed file onto a USB flash drive.

4. Insert the USB flash drive into the Brother device’s USB port.

- HL/DCP/MFC devices

aSelect Direct Print.

b The USB flash drive details appear. Select the “read_xxx.edpk” file.

c * For monochrome devices: Press Start.

* For color devices: Press either Black Start or Color Start.

- Scanners

aSelect Program Update.

b The USB flash drive details appear. Select the “read_xxx.edpk” file.

5. The settings you want will be extracted from the device and saved as a new file in the following format:

[settings file name]_[model name]_[serial number]_[index].edpk

The output log file will be automatically created.

9. The Back up Settings dialog box shows the backup progress.

To stop this operation, click the Stop button.

10. When completed, the summary results appear.

To check the destination folder of the backup file, click the Open folder button.

If unsuccessful, the error status is also listed in the results. Click the Open log folder button, check the backup

log details, and then try again.

2.7 Set Password

To change your default login password or current password.

1. Select Password settings from the drop-down list on the upper left.

2. Do one of the following:

-Change the default login password

a) Select the target devices in the list, and then select the Set a password for unconfigured devices radio button.

b) Type the password you want in the New password: and Confirm new password: fields.

c) Click Apply.

-Change the current password

a) Select the target devices in the list, and then select the Change device password radio button.

b) Click Input device password and type the current password in the Password: field.

Type the current password directly in the Device password field in the list.

c) Type the new password in the New password: and Confirm new password: fields.

d) Click Apply.

- When you select the Set a password for unconfigured devices menu, the Input device password

button and the Device password fields are disabled.

- Avoid using the following passwords as your administrator password:

• access

•initpass

•The “Pwd” located on the back of your machine

- It can also be used with USB-connected devices.

3. The Password settings dialog box shows the password setting progress.

To stop this operation, click the Stop button.

4. When completed, the summary results appear.

If unsuccessful, the error status is also listed in the results. Click the Open log folder button, check the

password setting result log details, and then try again.

Additional advanced functions are available to help you manage your devices.

3.1 Application Settings

Click in the top bar to configure the tool's settings.

3.1.1 Configure the Network Settings

To configure the device’s Network settings, do the following:

1. Click Network.

2. Click the SNMP tab.

3. Select the settings you want.

4. (Optional) Click the Proxy tab and configure proxy settings.

- The default setting is Auto.

- If you select Manual:, specify the items in the Server name:, Port:, User name:, and Password: fields.

5. When finished, click the OK button.

3 Additional Functions of the Mass Deployment Tool

(GUI)

3.1.2 Configure the Device Discovery Settings

To discover the target devices you want, configure the Device discovery settings below:

To search for devices on your network

1. Select Device discovery.

2. Select the IP broadcast: check box or the IP unicast: check box in the Network: tab.

3. Click to add a new address.

4. When finished, click the OK button.

To search for devices on a different local network

1. Select Device discovery.

2. Select the Agent broadcast: check box.

The Agent Broadcast feature uses the software called BRAgent. BRAgent runs on a computer on a different

LAN from your computer, discovers devices, and then passes the discovery results to your Mass Deployment

Tool.

3. Click to enter the Agent’s IP address: or Agent’s node name: field, and then click the OK button.

4. Specify the Agent server port.

5. When finished, click the OK button.

To search for USB-connected devices

1. Select the USB: check box.

2. Click the OK button.

- To edit the specified setting items, select the item and click .

- To delete the specified setting items, select the item and click .

3.1.3 Link the Mass Deployment Tool to BRAdmin Professional 4

From the main screen, go to Application settings > Operation mode, and select Import the device list

database and application settings from BRAdmin Professional 4 to link the Mass Deployment Tool to

BRAdmin and use its device information and application settings. When this setting is enabled, you cannot change

the Network and Device discovery settings from the Mass Deployment Tool.

3.1.4 Application Information

The following Mass Deployment Tool information is available:

- To check the tool's Application log in the case of errors, click the Open button from the Application log: menu.

- To view the version information, click the Version button from the About this application: menu.

- To check the application version, click the Check for software updates button. You can update the software if

a newer version is available.

- To check the license information, click the License button.

3.2 Activate Solutions

You can send license files to activate custom software solutions on the target devices.

A valid license file is necessary for this task. A license file can contain many activation codes, allowing solutions to

be activated on many devices simultaneously. If you do not have one, contact your local Brother office.

1. Make sure the device list contains all the devices you want.

2. Select Activate solutions from the drop-down list in the top bar.

3. The Activate solutions screen appears. The devices you cannot send the license to are shown as

“Not supported”.

4. Enter the device password in the Device password column, if needed.

5. Do one of the following:

-If you have a license file: Select the License file: radio button, and then type the file name in the field below,

or click the Browse… button to select the license file.

-If you have license codes: Select the License code (20 digit number): radio button, and then type the license

codes in the field below.

Multiple codes can be entered, one license code per line.

6. Click the Browse… button next to the Save the result file to: field and specify where to save the result file.

You can also copy and paste folder paths into this field.

7. Click the Activate button.

8. The Activate solutions dialog box shows the activation progress.

You can also stop the operation by clicking the Stop button.

9. When completed, the summary results appear.

If unsuccessful, the error status is also listed in the results. Click the Open log folder button, check the log

details, and then try again.

The tool’s Command Line Interface (CLI) allows you to configure devices remotely using the Command Prompt.

The CLI automatically converts settings files to an appropriate format and sends them to the device you want.

It then retrieves the settings data and verifies whether the settings have been applied correctly.

4.1 Use CLI in the Mass Deployment Tool

To use the tool’s CLI, you must run the Command Prompt in Windows, and then enter the correct commands and

options to execute specific instructions. The CLI uses the following syntax:

settingcmd.exe command option option

Where:

Command: performs a specific task and displays the result

Option: modifies the operation of a command

Examples

Applying settings files:

settingcmd.exe apply --ip IP_address --file your_file_name.json

--password your_password

Retrieving settings files:

settingcmd.exe retrieve --ip IP_address --file your_file_name.json

--output your_file_name.edpk --password your_password

Only English can be used in the Command Line Interface.

The Settingcmd.exe file is stored in the “SettingCommand” folder.

4 Command Line Interface (CLI)

4.2 Commands and Options

4.2.1 Commands

The following commands can be combined with one or more options to perform specific device configuration

tasks.

Command Option Description

send Either “Device identifier”*

or “profile” is required. 1

●Device identifier

Required:

●file

Optional:

●password

●profile

Required:

●result

Optional:

●profilepassword

●csvdelim

Available in both, if needed:

●networksettingpath

●dkeypassword

●dkeyfile

●log

●communitynameset

●communitynameget

* For more information, see

4.2.2 Device Identifiers.

Allows you to send the specified file to the device. PRN, PJL,

DJF, PJLF, and PCLF files are supported.

PJFL and PCLF are filter files used by filter functions

supported by some devices.

Example:

settingcmd.exe send --ip IP_address

--file your_file_name.prn

settingcmd.exe send --profile

your_profile_name.csv --result

your_filename.csv

Confirm the result for each device in the results file (CSV).

The results file contains all items in your deployment profile

along with the following items:

- Result

- Detail

- Start time

- Finish time

read Required:

●Device identifier

●file

Optional:

●output

●password

●networksettingpath

●dkeypassword

●dkeyfile

●log

●communitynameset

●communitynameget

Allows you to send the specified file to the device and to read

the response. Only PJL files are supported.

Example:

settingcmd.exe read --ip IP_address

--file your_file_name.pjl

--output our_file_name.txt

(m)apply

“mapply”

command must

use “profile”.

Either “Device identifier”

or “profile” is required. 1

●Device identifier

Required:

●file

Optional:

●password

●skipvalidate

●profile

Required:

●result

Optional:

●profilepassword

●csvdelim

●createfileonly

●outputdir (*)

Available in both, if needed:

●schema

●pjltable

●enumtable

●forcepjl

●forcenative

●ignorepjlerror

●skipverify

●networksettingpath

●dkeypassword

●dkeyfile

●log

●communitynameset

●communitynameget

●forcehttps

*If you use “--createfileonly”,

you must also use “--

outputdir”.

Allows you to send and apply the specified settings file and

confirms the result. JSON, DPK, and EDPK files are

supported.

If the “mapply” command is used with the “--outputdir” option,

the tool will save each device's intermediate files to the

designated folder.

If the “mapply” command is used with both the

“--createfileonly” and the “--outputdir” options, the tool will

only save each device's intermediate files to the designated

folder and will not apply the files to each device.

Example:

settingcmd.exe apply --ip IP_address --file

your_file_name.json –-password your_password

settingcmd.exe mapply --profile

your_profile_name.csv --result

your_filename.csv

Confirm the result for each device in the results file (CSV).

The results file contains all items in your deployment profile

along with the following items:

- Result

- Detail

- Start time

- Finish time

- (Optional) Output: If you use the “(m)apply” command with

the “--outputdir” option, the path for saving the intermediate

file appears here.

retrieve Required:

●Device identifier

●output

Optional:

●file

●password

●networksettingpath

●log

●communitynameset

●communitynameget

●forcehttps

Allows you to retrieve specific settings data from the

specified device.

The tool sends a request to the specified target device and

stores the retrieved settings data, which includes all the

settings in the JSON schema based on the specified file path.

To download only specific settings, use the “--file” option to

specify the settings file that includes the items you want.

Example:

settingcmd.exe retrieve --ip IP_address

--file your_file_name.json

--output your_file_name.edpk

--password your_password

Command Option Description

Page is loading ...

Brother HL-L9430CDN User guide