Page is loading ...
SMARTPHONE CAR MOUNT &
CHARGING KIT / SOPORTE DE
SMARTPHONE Y KIT DE CARGA
PARA AUTO SKHU 2 B2
IAN 340483_1910
SMARTPHONE CAR MOUNT &
CHARGING KIT
Operating instructions
SOPORTE DE SMARTPHONE Y KIT
DE CARGA PARA AUTO
Instrucciones de uso
US - EN Operating instructions Page 1
US - ES Instrucciones de uso Página 21
Before reading, unfold both pages containing
illustrations and familiarise yourself with all functions
of the device.
Antes de empezar a leer abra las dos páginas que
contienen las imágenes y, en seguida, familiarícese
con todas las funciones del dispositivo.
A
Back
1.
2.
C
B
SKHU 2 B2 US-EN │ 1 ■
Contents
Introduction ........................ 3
Intended use ....................... 3
Trademark information .............. 4
Used Warning types ................. 5
Important safety instructions ......... 6
Operating elements ................. 9
Technical specifications .............. 10
FCC compliance statement ........... 10
Check package contents ............ 12
Handling and operation ............. 12
Fitting the car cradle .......................12
Mounting the suction cup ...................13
Insert cell phone into car holder ..............13
Charging the cell phone ....................14
Troubleshooting ................... 15
Cleaning and maintenance .......... 16
Store when not in use ............... 16
IB_340483_SKHU2B2_LB9.indb 1IB_340483_SKHU2B2_LB9.indb 1 13.02.20 09:0113.02.20 09:01
SKHU 2 B2■ 2 │ US-EN
Disposal .......................... 17
Disposal of the device .....................17
Disposal of packaging .....................17
3 year limited warranty ............. 18
Distributor ........................ 20
IB_340483_SKHU2B2_LB9.indb 2IB_340483_SKHU2B2_LB9.indb 2 13.02.20 09:0113.02.20 09:01
SKHU 2 B2 US-EN │ 3 ■
Introduction
Congratulations on purchasing your new
device.
You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about the safety,
usage, and disposal of the product. Before using the
product, please familiarize yourself with all operating
and safety information. Use the product only as
described and for the specified range of applications.
Keep these operating instructions in a safe location. In
addition, please pass these documents on, together
with the product, to any future owner.
Intended use
The car phone holder is a communications device,
and is used to hold and charge cell phones (and other
5V devices with a USB port) in a car. The car/USB
adapter is only suitable for vehicles with a cigarette
lighter whose negative pole is connected to a ground.
The Smart Fast Charge technology
reduces charging time significantly for
compatible devices. It automatically
sends a signal to compatible connected devices that
they are using the maximum available charging current.
IB_340483_SKHU2B2_LB9.indb 3IB_340483_SKHU2B2_LB9.indb 3 13.02.20 09:0113.02.20 09:01
SKHU 2 B2■ 4 │ US-EN
Any use other than the intended use is considered to
be improper and can result in damage and injury.
The manufacturer accepts no responsibility for damage
caused by improper use or unauthorized modifications.
This product is only intended for private use, not for
commercial applications.
Trademark information
USB is a registered trademark of USB Implementers
Forum, Inc.
The SilverCrest trademark and trade name are the
property of their respective owner.
All other names and products may be the trademarks
or registered trademarks of their respective owners.
IB_340483_SKHU2B2_LB9.indb 4IB_340483_SKHU2B2_LB9.indb 4 13.02.20 09:0113.02.20 09:01
SKHU 2 B2 US-EN │ 5 ■
Used Warning types
The following types of warning are used in these
operating instructions:
► WARNING indicates a hazardous situation that,
if not avoided, could result in death or serious injury.
► NOTICE indicates information that is considered
important, but not hazardous (e. g. messages
related to property damage).
A tip provides additional information that will
assist you in using the device.
IB_340483_SKHU2B2_LB9.indb 5IB_340483_SKHU2B2_LB9.indb 5 13.02.20 09:0113.02.20 09:01
SKHU 2 B2■ 6 │ US-EN
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE!
FOR HOUSEHOLD USE ONLY!
SAVE THESE INSTRUCTIONS
■ This device is not intended to be used by persons
(including children) with limited physical, sensory or
mental capabilities, or lack of experience and/or
knowledge, unless they are being supervised or have
been instructed on how to use the device safely.
■ Children must be supervised and prevented from
playing with the device.
■ Packaging materials (e.g. films or hard foam) are
not children’s toys. There is a risk of suffocation!
■ Check the device for visible external damage
before use. Do not operate devices that have been
damaged or dropped.
■ If the power cord or ports are damaged, have them
replaced by an authorized specialist or customer
service to avoid risks.
■ Never open the device and do not perform any
repairs yourself.
IB_340483_SKHU2B2_LB9.indb 6IB_340483_SKHU2B2_LB9.indb 6 13.02.20 09:0113.02.20 09:01
SKHU 2 B2 US-EN │ 7 ■
■ Ensure that no moisture or liquids penetrate the
device.
■ Never subject the device to extreme heat or high
humidities, especially when storing it in a vehicle.
The vehicle standing for longer periods of time or
warm, sunny weather can result in high tempera-
tures in the interior and glove department. Remove
electrical and electronic devices from the vehicle.
■ When mounting the holder, make sure it will not
interfere with steering, braking or using any other
vehicle systems (e.g. airbags), or block your view
while driving.
■ Do not place the car holder in the airbag deploy-
ment area or near it, as it could be flung through
the vehicle interior if the airbag is triggered and
cause serious injuries.
■ Make sure the holder is not mounted at a location
that could come into direct contact with you during
an accident or collision.
■ Also follow the operating instructions that came
with your cell phone/end device.
■ If you notice an odor or smoke coming from the
device, disconnect it from the cigarette lighter
immediately.
IB_340483_SKHU2B2_LB9.indb 7IB_340483_SKHU2B2_LB9.indb 7 13.02.20 09:0113.02.20 09:01
SKHU 2 B2■ 8 │ US-EN
■ Do not breathe in the smoke, as it is hazardous to
your health.
■ Regularly check whether the suction cup is correctly
attached to the windshield at the bottom edge of
the holder. This is especially important in areas
where outside temperatures often fluctuate signifi-
cantly.
■ Follow all local laws. Whenever driving, your
hands must be free to operate the vehicle.
Road safety must always take priority while driving.
Only use this holder if it does not present a risk in
any driving situation.
IB_340483_SKHU2B2_LB9.indb 8IB_340483_SKHU2B2_LB9.indb 8 13.02.20 09:0113.02.20 09:01
SKHU 2 B2 US-EN │ 9 ■
Operating elements
1 Suction cup
2 Suction cup locking arm
3 Ball joint
4 Screw ring
5 Ball joint socket
6 Cell phone side brackets
7 PRESS button
8 Bottom bracket for cell phone
9 Car/USB adapter
0 Ring tab
q USB-port type-C
w Operating LED
e USB-port type-A
r Charging cable
t Micro-USB connector
z USB type-C connector (Micro-USB to USB type-C)
u Operating instructions (symbol)
IB_340483_SKHU2B2_LB9.indb 9IB_340483_SKHU2B2_LB9.indb 9 13.02.20 09:0113.02.20 09:01
SKHU 2 B2■ 10 │ US-EN
Technical specifications
Model SKHU 2 B2
Input voltage/current 12–24V (DC),
max. 2 A
Output voltage/current
USB type-A
5V (DC),
max. 2.1 A*
Output voltage/current
USB type-C
5 V (DC),
max. 3 A*
Side bracket spacing Approx. 1.96–3.54 in
(5.0–9.0 cm)
* When using both USB ports q/e at the same
time, the total power consumption of the connected
devices must not exceed 3 A.
FCC compliance statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause unde-
sired operation.
CAUTION: Changes or modifications not expressly ap-
proved by the party responsible for compliance could
void the user’s authority to operate the equipment.
IB_340483_SKHU2B2_LB9.indb 10IB_340483_SKHU2B2_LB9.indb 10 13.02.20 09:0113.02.20 09:01
SKHU 2 B2 US-EN │ 11 ■
NOTE: This equipment has been tested and found
to comply with the limits for Class B digital devices,
pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
the receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
IB_340483_SKHU2B2_LB9.indb 11IB_340483_SKHU2B2_LB9.indb 11 13.02.20 09:0113.02.20 09:01
SKHU 2 B2■ 12 │ US-EN
Check package contents
Before first use, check whether the package contents
are complete and look for any visible damage (see
fig. A and B). If the delivery is incomplete or damage
has occurred as a result of defective packaging or
during transport, contact the customer service hotline
(see 3 year limited warranty section). Remove all
parts from the packaging and remove all packaging
material from the device.
▯ Car cradle with suction cup
(consisting of two parts)
▯ Car/USB adapter 9
▯ Charging cable r
▯ Operating instructions u
Handling and operation
Fitting the car cradle
♦ Unscrew the screw ring 4 counterclockwise from
the car holder.
♦ Place the screw ring 4 over the ball joint 3 and
press the ball joint 3 into the ball joint socket 5
(see fig. C).
♦ Screw the screw ring 4 clockwise onto the ball
joint socket 5 until tight.
IB_340483_SKHU2B2_LB9.indb 12IB_340483_SKHU2B2_LB9.indb 12 13.02.20 09:0113.02.20 09:01
SKHU 2 B2 US-EN │ 13 ■
Mounting the suction cup
Make sure that the surface you want to attach the
suction cup to is clean, dry and free of grease. Make
sure that the suction cup locking arm 2 is released.
♦ Push the suction cup 1 against the windshield
and press the suction cup locking arm 2 upward.
This generates a vacuum, and the suction cup 1 is
attached to the windshield.
♦ You can adjust the horizontal and vertical direction
to your needs using the 360° ball joint 3.
♦ To remove the suction cup 1 from your windshield,
move the suction cup locking arm 2 downward
and pull on the tab on the edge of the suction cup.
Insert cell phone into car holder
♦ Back Press the PRESS button 7 and the side
brackets 6 on the car holder automati-
cally move outward.
♦ Place the cell phone on the car holder bottom
bracket 8.
♦ Push the car holder side brackets 6 inward until
your cell phone is secured.
♦ Press the PRESS button 7 to remove the cell
phone from the car holder.
IB_340483_SKHU2B2_LB9.indb 13IB_340483_SKHU2B2_LB9.indb 13 13.02.20 09:0113.02.20 09:01
SKHU 2 B2■ 14 │ US-EN
Charging the cell phone
♦ Connect the car/USB adapter 9 to your vehicle’s
on-board power supply (cigarette lighter). The
operating LED w lights up white to indicate that
the car USB adapter 9 is ready for use. Depend-
ing on the vehicle type, the ignition may have to be
turned on first.
♦ Connect the charging cable r to the USB port
type A e on the car/USB adapter 9 and the
cell phone. To use the USB Type-C connector z,
plug it into the micro-USB connector t. Charging
begins immediately and will be indicated on the
cell phone display.
To use the USB port type C q you will need an
appropriate cable, which is not supplied. Contact
your local electronics dealer.
♦ Once charging is complete, remove the car/USB
adapter 9 from the cigarette lighter by pulling on
the ring tab 0.
IB_340483_SKHU2B2_LB9.indb 14IB_340483_SKHU2B2_LB9.indb 14 13.02.20 09:0113.02.20 09:01
SKHU 2 B2 US-EN │ 15 ■
► For vehicles in which the cigarette lighter works
when the ignition is off, the device must be discon-
nected from the cigarette lighter after use.
Otherwise, the vehicle battery will run down over a
longer period of time, as the device also consumes
power in its non-operating state.
Troubleshooting
A connected device won’t charge
(The white operating LED w does not light up)
♦ No connection to cigarette lighter. Check the
connection.
♦ Depending on the vehicle type, the ignition may
have to be turned on first.
The white operating LED w turns off after a
device is connected
♦ The car/USB adapter 9 is overloaded and no
longer charges the connected devices. The internal
fuse tripped. Disconnect all connected devices
from the car/USB adapter 9. The white operating
LED w will light up right away and the car/USB
adapter 9 is operational again.
IB_340483_SKHU2B2_LB9.indb 15IB_340483_SKHU2B2_LB9.indb 15 13.02.20 09:0113.02.20 09:01
SKHU 2 B2■ 16 │ US-EN
If you cannot solve the problem using the steps
above, please contact the customer service hotline
(see 3 year limited warranty section).
Cleaning and maintenance
► Disconnect the device from the cigarette lighter
before cleaning it and when it is out of use.
■ If necessary, clean the device with a damp cloth.
Regularly check the condition of the device.
Do not use the device if you notice any damage.
Store when not in use
► The temperatures inside the car can reach extreme
values in summer and winter. To prevent damage,
do not store the device in the vehicle.
■ Store the device in a dry, dust-free place, away
from direct sunlight.
IB_340483_SKHU2B2_LB9.indb 16IB_340483_SKHU2B2_LB9.indb 16 13.02.20 09:0113.02.20 09:01
/
