Islander V-SN-06-WM35 Installation guide

Type
Installation guide
TRANSITIONINSTALLATION
Carefully roll the stair nose against the front of the
Carefully roll the stair nose against the front of the
step, making sure the transition is in place. Once
step, making sure the transition is in place. Once
in its desired position, press down firmly over the
in its desired position, press down firmly over the
entire stair nose.
entire stair nose.
Suboor
Suboor
Floor
Floor
Riser
Riser
Apply a generous
bead of construction
adhesive along the
underside of the stair
nose.
Suboor
Suboor
Floor
Floor
Riser
Riser
For added security,
For added security,
use finishing nails.
use finishing nails.
Let the adhesive
Let the adhesive
cure according to
cure according to
directions.
directions.
WATERPROOF
STAIR NOSE
V-SN-06
Used to finish the end of a step.
Dimension: 2.23”w x 1.034”h
Measure and trim to fit.
  • Page 1 1

Islander V-SN-06-WM35 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI