2. Martec
  3. MVDC1333 M 52 Inch Viper DC Ceiling Fan Matt Black

Martec MVDC1333 M 52 Inch Viper DC Ceiling Fan Matt Black Installation guide

  • Hello! I've reviewed the MDCWALL Installation Guide and I'm ready to help with your setup questions. This guide covers how to install and pair the MDCWALL remote control for ceiling fans. It describes features such as fan speed control, timers, light control, summer/winter mode, and pairing. Feel free to ask any specific questions you might have.
  • What should I do before installation?
    How do I pair the receiver?
    What do I do if the fan is not responding?
E: [email protected] | P: 02 8778 7500
www.martecaustralia.com.au
MDCWALL Installation Guide
Thanks for choosing our MDCWALL remote control.
We strongly recommend that you read this manual carefully before installation.
Installation Instructions
Switch o the mains.
Step 1 Step 2
Wire MDCWALL as illustrated.
Finish the installation with two screws
supplied.
Step 3
Step 5
Switch on the mains.
Step 4
When mains is ON.
All icons will appear on the LCD screen
about 2 seconds. Wait for another 10
seconds until the backlight turn o.
WAIT
Turn on ceiling fan power for pairing receiver, touch and press about 5 seconds, the receiver will make a beep sound. This
indicates the receiver has picked up the frequency that was selected on the transmitter.
NB: After the mains is on, do not press any other button on the transmitter before pressing button as this will cancel the
process.
After completing the step above, you should be able to operate the ceiling fan and light from the wall controller. If the fan is not
responding, please turn the power o to the receiver and repeat the above step again.
N
L
240VAC
E: [email protected] | P: 02 8778 7500
www.martecaustralia.com.au
WARNING Installation MUST carry out by a qualied and licensed electrician.
Functions of Transmitter
CARE INSTRUCTIONS
• Ensure the ceiling fan is disconnected before any cleaning or maintenance work is carry out.
• LED lights are not detachable nor replaceable. It can only be supplied with the ceiling fan as one unit.
WARNING
• Installation of product MUST follow SAA standards and meet local authority regulations.
• Installation MUST be carried out by a qualied and licensed electrician.
• Fan and light MUST be earthed.
• Bracket MUST be rmly attached to a at solid structure or timber frame.
• DO NOT mix blades from one model to another, all blades MUST be replaced if damaged.
• The warranty is VOID if product is not installed according to this installation guide.
1 Year In-Home Warranty
Visit our website for details https://www.martecaustralia.com.au/warranty-statement/
Switch on the mains.
Fan Timer 1,2,4 or 8 hours
Fan will turn o automatically
after 1, 2,4 or 8 hours.
Summer/winter reverse mode
Fan Speed Setting
Light ON/OFF
/