ROGERSELLER 360601375207 is a pull out sink swivel outlet mixer tap that can be used in various kitchen setups. It includes a dual check valve, spout handpiece, spout assembly with O-ring, spacer, spout lock-nut, pull-out hose, counter weight, and hose clip. The tap requires a minimum hole size of Ø25mm and a maximum hole size of Ø42mm, with a maximum bench thickness of 40mm. It can withstand a maximum hydrostatic pressure of 1000kpa, with a recommended maximum of 500kpa and a minimum of 150kpa. For optimum performance, the hot and cold inlet water pressure should be equal.
ROGERSELLER 360601375207 is a pull out sink swivel outlet mixer tap that can be used in various kitchen setups. It includes a dual check valve, spout handpiece, spout assembly with O-ring, spacer, spout lock-nut, pull-out hose, counter weight, and hose clip. The tap requires a minimum hole size of Ø25mm and a maximum hole size of Ø42mm, with a maximum bench thickness of 40mm. It can withstand a maximum hydrostatic pressure of 1000kpa, with a recommended maximum of 500kpa and a minimum of 150kpa. For optimum performance, the hot and cold inlet water pressure should be equal.
ROGERSELLER 360601375207 is a pull out sink swivel outlet mixer tap that can be used in various kitchen setups. It includes a dual check valve, spout handpiece, spout assembly with O-ring, spacer, spout lock-nut, pull-out hose, counter weight, and hose clip. The tap requires a minimum hole size of Ø25mm and a maximum hole size of Ø42mm, with a maximum bench thickness of 40mm. It can withstand a maximum hydrostatic pressure of 1000kpa, with a recommended maximum of 500kpa and a minimum of 150kpa. For optimum performance, the hot and cold inlet water pressure should be equal.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI