Haier L22M3 User manual

Brand: Haier

Model: L22M3

Category: LCD TVs

Type: User manual

Haier L22M3 is a versatile device that combines television and computer display functionalities. With a 22-inch screen, 1366x768 resolution, and a 16:9 aspect ratio, it offers a clear and immersive viewing experience. It supports various input sources, including HDMI, VGA, AV, and YPbPr, allowing you to connect a wide range of devices such as DVD players, gaming consoles, and computers. Additionally, it features a USB port for media playback and recording. The Haier L22M3 also includes built-in speakers, delivering a well-rounded entertainment experience.

LCD TV

OWNER' S MANUAL

MODEL: L22M3

Please READ this manual carefully

before operating your TV, and retain

it for future reference

Contents

1 Safety and warnings..........................................................................................................2-3

2 Introduction.....................................................................................................................4

3 Installation.......................................................................................................................5-8

TV Operation..................................................................................................................11-14

TV Trouble shooting........................................................................................................15

4 Remote Controller .........................................................................................................9-10

-1-

-2-

SAFETY AND WARNINGS

IMPORTANT SAFETY INSTRUCTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK).NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN!

CAUTION

The symbol indicates that dangerous

voltages constituting a risk of electric shock

are present within this unit.

The symbol indicates that there are

important operating and maintenance

instructions in the literaturaccompanying this

unit.

To reduce the risk of fire or electric shock, do

not expose this apparatus to rain or moisture.

WARNING:

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings, install

in accordance with the instructions.

8) Do not install near any heat sources such as

radiations, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9) Do not defeat the safety purpose of the

polarized plug. If the provided plug does not fit

into your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protected the power cord from being walked

on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11) Only use attachments/accessories specified

by the manufacturer.

12) Unplug this apparatus during lighting

storms or when unused for long periods of time.

13) Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or

has been dropped.

14) Mains plug is used as the disconnect device,

the disconnect device shall remain readily

operable.

15) The ventilation should not be impeded by

covering the ventilation openings with items,

such as newspapers, table-cloth, curtains, etc.

16) No naked flame sources, such as lighted

candles, should be placed on the apparatus.

17) Attention should be drawn to the

environmental aspects of battery disposal.

18) The use of apparatus in moderate climate.

19) The apparatus shall not be exposed to

dripping or splashing and that no objects filled

with liquids, such as vases, shall be placed on

the apparatus.

This symbol indicates that this product

incorporates double insulation between

hazardous mains voltage and user accessible

parts. When servicing use only

identical replacement parts.

This marking indicates that this product should

not be disposed with other household wastes

throughout the EU. To prevent possible harm to

the environment or human health from

uncontrolled waste disposal, recycle it

responsibly to promote the sustainable reuse of

material resources. To return your used device,

please use the return and collection systems or

contact the retailer where the product was

purchased. They can take this product for

environmental safe recycling.

The batteries shall not be exposed to

excessive heat such as sunshine, fire or the

like.

WARNING:

-3-

High voltages are used in the operation of this television

receiver. Do not remove the cabinet back from your set.

Refer servicing to qualified service personnel.

SAFETY AND WARNINGS

To prevent fire or electrical shock hazard, do not expose

the television receiver to rain or moisture.

Do not drop or push objects into the television cabinet

slots or openings. Never spill any kind of liquid on the

television receiver.

Do not block the ventilation holes in the back cover.

Adequate ventilation is essential to prevent failure of

electrical components.

Do not trap the power supply cord under the television

receiver.

Never stand on, lean on, or suddenly push the television or

its stand. You should pay special attention to children.

Serious injury may result if it falls.

Do not place your television on an unstable cart, stand,

shelf or table. Serious injury to an individual , and damage

to the television, may result if it falls.

When the television receiver is not used for an

extended period of time, it is advisable to disconnect

the AC power cord from the AC outlet.

Avoid exposing the television receiver to direct sunlight

and other sources of heat. Do not stand the television

receiver directly on other products which give off heat,

e.g. video cassette players and audio amplifiers. Do not

place naked flame sources, such as lighted candles on

the television.

Dim:515*320mm(

If the television is to be built into a compartment or similar

enclosure, the minimum distances must be maintained. Heat

build-up can reduce the service life of your television, and

can also be dangerous.

INTRODUCTION

-4-

Main features

Used as Television, display terminal,PC display

High luminance,wide viewing angle

Can store 99 TV programs

HDMI interface

NICAM

AC Power Cord..............................1

Infrared Remote Controller.............1

User s M anual................................1

Battery(AAA)................................2

Accessories

Main parameter

Viewing Picture Size(diagonal)

Resolution

1366x768

Aspect Ratio 16 : 9

TV System

PAL-B/G I D/K

Video Signal System PAL/NTSC

Receiving Channel

1-99

Inpu t Power Voltage AC 100 V- 240 V~ 50/60Hz

Po wer consumption

Audio Output Powe r THD 7%

Signal Input

Analog RGB(VGA) x 1

High-Definition Multimedia Interface (HDMI) x 1

Rear Composite Video Input x 1

Audio Input x 2

YCb (Pb )Cr (PR) x 1

Horizontal definition TV line

Composite Video input >=350

Y Cb(Pb ) Cr(Pr) >=400

Side USB x 1

60W

Response Time

5ms

Viewing Angle

Brightness

400cd/m

170

160

Dynamic Contrast

800:1

-5-

INSTALLATION

Front panel

KEYBOARD

REAR AV PASTER

All the terminals are(from left to right):

AC POWER SOCKET,

Note: 1.AV share one audio channel.

2.When HDMI port get DVI signal, the PC Audio channel is changed to

receive the audio for HDMI port.

HDMI, VGA , YPbPr, AV, AUDIO INPUT, PC AUDIO INPUT, ANTENNA.

and YPbPr

1: Remote control sensor.

2: Indicator LED: GREEN POWER ON.

RED STANDBY.

3: Key board

1 2 3

4 5 6

7 8 9 0

VOL

30 30

SOURCE

CH+

CH-

VOL+

VOL-

STANDBY

USB

1 SOURCE

Display the input source menu.

2 MENU

Display main MENU.

3 CH+/CH-

In TV mode press CH+ or CH- to change

the channel up and down.

In MENU mode, press CH+ or CH- to select

items .

In standby mode, press CH+ or CH- to turn

on the TV.

4 VOL+/VOL-

Adjust sound level.

In MENU mode, press VOL+ or VOL- to

adjust the item that you selected.

5. STANDBY

Press this button to turn the unit ON from

STANDBY mode.

Press it again to turn the set back to STANDBY.

6. USB

The USB memory stick should be plug in the

unit directly. USB extension cable should not be

used to avoid failing of data transferring and

interference caused.

100-240V~ 50/60Hz

AC-INPUT

HDMI

VGA INPUT

AUDIO

VGA INPUT

ANT

Pr L

Y Pb Pr

INPUT

YAV

ANTENNA

INSTALLATION

-6-

Note:

Aerial connections:IEC(female).

Input impendance:75 unbalanced.

INSTALLATION

-7-

STEPS:

Be sure both the TV and computer are Power off.

1.Connect VGA and audio cable

2.Connect power cord

3.Power on the TV, switch to PC mode

4.Power on the PC

This sequence is very important.

PRESET MODE

800*600

1024*768

1280*768

37.88

48.36

47.3

RESOLUTION

V.Freq.(Hz) H.Freq.(KHz)

NOTE:

PC V.Freq.(Hz) not more than 60Hz.

100-240V~ 50/60Hz

AC-INPUT

HDMI

VGA INPUT

AUDIO

VGA INPUT

ANT

Pr L

Y Pb Pr

INPUT

YAV

INSTALLATION

-8-

AV EQUIPMENT

This TV provides two groups of AV, one group of YPbPr for convenient connection to VCR, DVD or other

video equipment. Please refer to the owner s manual of the equipment to be connected as well.

You can use the input terminals on TV set rear as follows.

It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game

or stereo system, etc.....

YPbPr can support these video fomats:480i,576i,480p,576p,720p,1080i.

Note: 1.AVshare the audio input channel

2.When HDMI port get DVI signal, the PC Audio channel is changed to

receive the audio for HDMI port.

To au dio

outputs

with

terminal

VIDEO EQUIPMENT

VIDEO EQUIPMENT with YPbPr

Yellow (video)

White(audol L)

Red(audio R)

output

To video

HDMI

100-240V~ 50/60Hz

AC-INPUT

HDMI

VGA INPUT

AUDIO

VGA INPUT

ANT

Pr L

Y Pb Pr

INPUT

YAV

REMOTE CONTROLLER

-9-

EXIT

ENTER

HDMI

SLEEP

MIX

DISPLAY

REVEAL HOLD

LIST

INDEX

SOUND

PIC

ASPECT

YPbPr

SUBPAGE

AUTO

TEXT

SIZE

NICAM

RECALL

SOURCEMENU

2 3

4 5 6

7 8 9 0

VOL

POWER

MUTE

Insert Batteries Into the Remote Control

1 2

Remark:

1. Remove the battery cover.

2. Inserting the 2 AAA 1.5V batteries making sure the

polarity (+ or -) of the batteries matches the polarity

marks inside the unit.

3. Mount the battery cover.

Replace with new batteries when the TV set begins

to show the following symptoms:

Operation is unsteady or erratic. Sometimes the TV

set does not function with Remote Control Unit.

1) Alkaline Battery Recommended.

2) Remove batteries when they are exhausted or if the

remote control is not to be used for long time.

1:POWER

To set the TV to standby or power on.

2:NUMBER KEY:

For direct access to programmes. For a 2 digit

programme number, the second digit must be

entered before the dash disappears. The number

(in analog TV mode) is displayed for a few seconds.

3:MENU

To display the menu or return to the previous menu

4: CURSOR

To move within the menu.

5: EXIT

Used to exit menu.

6: VOL+/-

To adjust the sound level.

7: PIC

To switch the picture mode.

8: SLEEP

Set the time to turn off the TV.

9: SOURCE HOT KEYS

Switch to the source that you want

directly.

10:TELETEXT KEYS(see next page )

11:MUTE

To disable or enable the sound.

12: NICAM

To switch to nicam mode.only available in TV

programmes with nicam mode transmission.

13: RECALL

To access the previously viewed programme.

14: SOURCE

To display source menu .

15: ENTER

Confirms selection.

16: DISPLAY

Displays/removes the programme information.

17: SOUND

To switch sound mode.

18: CH+/CH-

To access the next or previous TV

Programmes.

19: ASPECT

To change the picture aspect ratio.

20: TEXT

To enter or exit TELETEXT.

21: AUTO

Auto adjust in PC mode.

-10-

REMOTE CONTROLLER

EXT

SELECTING A PAGE

DIRECT ACCESS

TO THE ITEMS

INDEX

SUB PAGE

HOLD

REVEAL

Press :

LIST

TELETEXT

Enter the number of the page required using the 0 to 9 up/down.

Example: page 120, enter 120. The number is displayed top left, the

counter turns and then the page is displayed. Repeat this operation to

view another page. If the counter continues to search, this means that

the page is not transmitted. Select another number.

Coloured are as are displayed at the bottom of the screen. The 4

coloured keys are used to access the items or corresponding pages.

The coloured areas flash when the item or the page is not yet available.

This returns to the contents page (usually page 100).

Certain pages contain sub-pages which are automatically displayed

successively. This key is used to stop or resume sub-page acquisition.

The indication appears top left.

To freeze the page.

To display or hide the concealed in formation (games solutions).

The user can set four favorite pages to be directly linked to the four

color keys. While list mode is activated, it is not possibility to use TOP or

FLOF navigation with the colorkeys. The favorite page numbers should

be stored and restored to/from nonvolatile memory for each channel by

the system software.

This is used to call or exit teletext modes. The summary appears with a

list of items that can be accessed. Each item has a corresponding 3

digit page number. If the channel selected does not broadcast teletext,

the indication 100 will be displayed and the screen will remain blank (in

this case, exit teletext and select another channel).

Teletext is an information system broadcast by certain channels which can be consulted

like a newspaper. It also offers access to subtitles for viewers with hearing problems or

who are not familiar with the transmission language(cable networks,satellite channels,etc.)

Size

To zoom the page.

You will obtain :

FUNCTION

TEXT LANGUAGE

SLEEP TIMER

RESETTING

OFF

WEST

OSD

OSD H-POSITION

OSD V-POSITION

OSD DURATION

OSD HALFTONE

OSD LANGUAGE

ENGLISH

TV OPERATION

-11-

PICTURE

CONTRAST

BRIGHTNESS

HUE

COLOUR

SHARPNESS

ASPECT

COLOUR TEMP

3D NR

16:9

PICTURE MODE STANDARD

NORMAL

MID

4.FUNCTION MENU

3.OSD MENU

The third item of the MENU is OSD MENU.

5.CHANNEL MENU

The fifth item of the MENU is channel menu(only

use in TV source).You can complete channel search

and setting here.

The first item of the MENU is PICTURE MENU.

You can adjust picture effect here, such as contrast,

brightness, etc.

Press to move, press to adjust.

1. PICTURE MENU

SOUND

BASS

TREBLE

BALANCE

SOUND MODE

STANDARD

2.SOUND MENU

The second item of the MENU is SOUND MENU.

You can adjust sound here.

Press to move, press to adjust.

Note:

1). If Bass, Treble are adjusted, the sound mode will

return to personal .

Note:

1). HUE only available when receiving NTSC

signal.

2). If contrast, brightness, hue, colour, sharpness

be adjusted, the picture mode will return to

personal.

The fourth item of the MENU is FUNCTION MENU.

You can adjust settings below

1).SLEEP TIME:adjust this item,you can set the sleep

timer.

2).LANGUAGE:adjust teletext language.

3).RESETTING:Reset all the settings to default value.

CHANNEL

COLOUR SYSTEM

MONO

OFF

SOUND SYSTEM

NICAM

SKIP

AUTO SCAN

MANUAL SEARCH

FINE TUNING

CHANNEL EDIT

PROGRAM AREA

AUTO

OTHERS

-12-

TV OPERATION

6. PIP

The Sixth item of the MENU is PIP Menu, you can

select PIP or POP operation.

650.25MHz

55.25MHZ

CHANNEL

STORE

7)Finetuning:finetuning the current program.

8).Channel edit:Press to entre the channel edit

.Rename the channel:

You can press to select one channel and press

1 button to rename it.

Use select character ,press 1 to store the

name or press 2 to cancel.

Use select character positon.

1).Colour system: adjust the colour system,

Auto is remmended.

2).Sound system:adjust the sound system.

Please select the right sound system for

your contry.

3).NICAM:Select Mono,Stereo,Dual

language,etc.

4).Skip:If select on,you can select the channel

only by dight button.

5).Auto scan:Serach all the channels automaticly.

6).Manual Search

Search the channels manually.

Channel: Select the channel of the manual search.

Search: Press begin tosearch.

Store:Press to store the channel

MULTI WINDOW

SUB SOURCE

SIZE

BORDER COLOUR

SOUND SOURCE

SWAP

PIP POSITION

MAIN

BLUE

LARGE

YPBPR

OFF

TOP L

PIP

1)Multi window

Open the PIP/POP window

2).Sub source

Select the sub source

3).Size

Adjust the PIP window size

4).PIP Position

Adjust the position of the PIP window

5).Border colour

Adjust the border colour of the sub window

6).Sound source

Select the sound source.

7).Swap

Swap the main source and the sub source.

Change the sequence.

Press 3 to select onechannel position ,then

press to select another channel,

when the 2 channels are hlighted,you can swap

them, press 1 to confirm or press 2

to cancel.

Delete the channel

Press 2 to select one channel.

Press 1 to delete or press 2 to

cancel.

001

002

003

004

005

006

007

008

009

010

011

012

013

015

016

017

018

019

020

021

022

023

024

025

026

027

028

029

001

002

003

004

005

006

007

008

009

010

011

012

013

015

016

017

018

019

14 A

020

021

022

023

024

025

026

027

028

029

001

002

003

004

005

006

007

008

009

010

011

012

013

015

016

017

018

019

14 B

020

021

022

023

024

026

027

028

029

25A

001

002

003

004

005

006

007

008

009

010

011

012

013

016

017

018

019

14B

15A

020

021

022

023

024

025

026

027

028

029

9).Program area

Before Auto scan,or Manual search,please select

the correct program area.

001

002

003

004

005

006

007

008

009

010

011

012

013

015

016

017

018

019

020

021

022

023

024

025

026

027

028

029

COLOR TEMP.

USER

USER-R

USER-G

USER-B

TV OPERATION

-13-

1. PC MENU

You can adjust picture here, such as contrast,

brightness.

Press to move, press to adjust.

CONTRAST

BR IGHTNESS

COLOUR TEMP

ASPECT

FULL

1).Colour temp: press to entre the colour temp

MENU.To select the colour temp,that you like.

2.GEOMETRY

1).H-Position: adjust the horizontal position of the

screen.

2).V-Position :adjust the vertical positon of the

screen.

3).Clock: finetune the screen width.

4).Phase: finetune the phase of the sreen,usually don

not adjust this item.

AUTO ADJUST

Source

AV 1

AV 2

YPBPR

HDMI1 HDMI2

AV 1

AV 2

YPBPR

HDMI1

HDMI2

:The two sources cannot do PIP/POP

:The two sources can do PIP/POP.

The sources in the table are optional. If any of these sources are not available in your unit,

please ignore these sources.

Note:

In PC mode,there are two items that are different

with other sources.

GEOMETRY

H-POSITION

V-POSITION

CLOCK

PHASE

TV OPERATION

-14-

USB Function:(optional)

1.Entre the “USB” menu.

1)Press the “source” button to entre the source menu.

2)press to select the “USB”.

3)Press to entre the “USB”menu.

4)press to select the JPEG menu or MP3 menu.

1.JPEG menu

)Select the JPEG item of the USB menu, and press

to entre the JPEG menu.

)Press to entre folder or exit folders until JPEG

files are found.

)Press to display the JPEG files ,press “MENU”

button to exit .

Note:

1.Press to select previous picture or next

Picture, press to rotate the picture.

JPEG

110.JPG1

FOLDERS

2009/03/10 08:53:00

JPG

VOLUME

MUTE

Mp3

MP3

110.MP3

1.MP3 menu

) Select the mp3 item of the USB menu, and press

to entre the MP3 menu.

)Press to entre folders or exit folder until Mp3

files are found.

)Press to play the MP3 file ,press “MENU” button

to exit.

Note :

When playing the mp3 music, press to move ,and

press to play, stop, pause, etc.

Picture Audio

Snow Noise

antenna position, direction

or connection

Inspection

Interfere

Noise

electronic equipment,car/

motorcycle,fluorescent light

Normal Picture

Mute

Volume(inspect wether the

mute function on the remote

control are started , or audio

system are correct or not)

No picture Mute

Power cord is not inserted

Power switch is not opened

Contrast and brightness/volume

setup

Press standby key on the remote

control for inspecting

No color Normal audio color control

Scramble

Normal audio

or weak

retune channel

No color

Noise

Audio system

Special Explanation The accessories such as remote control is not belongs

to the guarantee

Normal audio

antenna position, direction

or connection

Trouble shooting

Trouble phenomenon

Ghost

-15-

Haier L22M3 User manual

Brand: Haier

Model: L22M3

Category: LCD TVs

Type: User manual

Download PDF

report

Haier L22M3 User manual

Haier L22M3 User manual

Related papers

Other documents