One Stop Gardens 91496 Assembly Instructions

Brand: One Stop Gardens

Model: 91496

Type: Assembly Instructions

WOODEN PLANTER WAGON

ASSEMBLY INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

®.

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

91496

Specifications

Save This Manual

You will need the manual for the safety warnings and precautions, assembly

instructions, operating and maintenance procedures, parts list and diagram. Keep

your invoice with this manual. Write the invoice number on the inside of the front

cover. Keep the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When assembling and adding plants into the Wagon and when

locating the Wagon, basic safety precautions should always be followed to

reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Keep children away. Children must never be allowed in the work area. Do

not let children play with this product. This is not a toy.

3. Dress properly. Do not wear loose clothing or jewelry as they can be caught

in moving parts. Protective, electrically nonconductive clothes and nonskid

footwear are recommended when working. Wear restrictive hair covering to

contain long hair.

4. Use eye and ear protection. Always wear ANSI approved impact safety

goggles when assembling this product.

5. Do not overreach. Keep proper footing and balance at all times when

assembling product.

6. Replacement parts. When servicing, use only identical replacement parts.

Use of any other parts will void the warranty. .

Warning: The warnings, cautions, and instructions discussed in this instruc-

tion manual cannot cover all possible conditions and situations that may oc-

cur. It must be understood by the operator that common sense and caution

are factors which cannot be built into this product, but must be supplied by

the operator.

Unpacking

When unpacking, check to make sure the following parts are included. If any

parts are missing or broken, please call Harbor Freight Tools at the number on

Materials Dark Brown Wood

Overall Dimensions 47”L x 17-3/8”W x 26-3/4”H

Overall Weight 19.9 Lbs

Max. Weight Capacity 35 Lbs.

SKU 91496 Page 2

SKU 91496 Page 3

3. Mount the Wheels (2) by placing Washer (7) on Axle, tap on Wheel with

hammer, place another Washer (7) on the Axle. Push the Cotter Pin (9)

through the hole in the Axle. Bend the Cotter Pin around the Axle with Pliers

to prevent the Wheel from coming off. Repeat on the other three Wheels.

See Figures C & D.

Carriage (3)

Wheels (2)

Side Board (5)

Bottom Board (4)

Figure A

Figure B

Axle

Fork for Mounting

Handle

Figure D

Axle

Cotter Pin (9)

Washer (7)

Assembly Instructions

1. Assemble all parts on a smooth surface to avoid scratching.

2. Match up the holes on the Carriage (3) to the underside of the Bottom Board (4).

Thread the Bolts (6) and Washer (10) through the holes in the Bottom Board and

secure with a Washer (10) and Nut (11) on the underside. Tighten hardware.

See Figures A & B.

Bolt (8), Washer (10),

Washer (10), Nut (11)

SKU 91496 Page 4

4. To put on the Side Board (5), lift the hinged section of the Bottom Board (4)

(back) and match the holes of the Side Board (5). Thread the Bolt (6) and

Washer (10) through the hole in the Side Board (5) and back of Bottom

Board. Thread another Washer (10) on the end of Bolt (6) and tighten with

Nut (11). Repeat on opposite end and other side.

See Figures D & E.

5. Place the Handle (1) in the fork on the Carriage (3). Match up holes. Push

Bolt (8) with Washer (7) through hole. Place Washer (7) on Bolt and tighten

with Nut (11).

See Figure F.

Hinged

Section of

Bottom

Board (4)

Side Board (5)

Bolt (6), Washer (10),

Washer (10), Nut (11)

Figure D

Figure E

6. This Wagon is for outdoor decorative purposes only. It is not designed to

haul objects. When used as a planter, it is suggested you line the Wagon

with a waterproof plastic lining (not included) to prevent the wood from

deteriorating when getting wet.

Caution: This is not a toy and children

should be supervised when around the Wooden Planter Wagon. Do not

overload Wagon. Maximum weight is 35 Lbs.

Fork on

Carriage (3)

Handle (1)

Washer (10)

Nut (11)

Bolt (8)

Washer (10)

SKU 91496 Page 5

Parts List

Part # Description Qty.

Handle

Coach Wheel

Carriage

Bottom Board

Side Board

Bolt 6x40mm

Washer

Bolt 6x55mm

Cotter Pin

Washer

Nut

Bolt 6x65mm

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL

AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY

REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO

MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY

PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY

STATES THat ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED

AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND

LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT

PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS

THERETO.

NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.

Axle

Fork

One Stop Gardens 91496 Assembly Instructions

One Stop Gardens 91496 Assembly Instructions

One Stop Gardens 91496 Assembly Instructions

Related papers

Other documents