Bauknecht SUPER ECO 1300 Owner's manual

Type
Owner's manual

This manual is also suitable for

GB PROGRAMME CHART
5019 401 05384
: optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted to 1000 rpm in this programme.
2)
For improved garment care, spin speed is restricted to 400 rpm in this programme.
Programme
Care
Labels
Max
Load
kg
Type of wash/Notes
- For temperature selection, respect the manufacturer’s recommendations
on the care label
Detergents and additives Special options
Max
Spin
Speed
rpm
Pre-
wash
Main
wash
Softener Start
delay
Start
selectie
Eco
Eco
Pre-
wash
Voor-
was
Easy
ironing
Gemakkelijk
strijken
Intensive
rinse
Intensief
Spoelen
Rinse
hold
Spoel-
stop
Variable
spin
Centrif.
Cotton /
Hygienic +
95 °C
Kookwas
95 °C
6.0
Normally to heavily soiled bed linen, table linen and underwear, towels,
shirts etc. made of cotton and linen.
Selecting “Cotton 95”, this programme eliminates bacteria, ensuring
sanitization of your laundry. The bacteria removal efficiency has been
tested following a similar methodology to the NF EN 13697 standard of
Nov. 2001.
Ye s
❉❉
max.
Cotton
60 °C
Bonte was
60 °C
6.0
Cotton
40 °C
Bonte was
40 °C
5.0
SuperEco
60 °C
SuperEco
60 °C
6.0
Slightly to normally soiled bed linen, table linen and underwear, towels,
shirts etc. made of cotton and linen.
Offers highest economy in energy consumption by prolonged washing duration.
Ideal to be run overnight to additionally profit from the more favourable energy
rates. To avoid noise of spinning at night, set spin speed to “0” and start spin
programme in the morning, or define programme start with “Start delay
accordingly.
Ye s
❉❉
——
❉❉
max.
Synthetics
30 - 40 - 60 °C
Synthetisch
30 - 40 - 60 °C
2.5
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,
Trevira), polyamide (Perlon, Nylon) or blends with cotton.
Ye s
❉❉
1000
1)
Delicates
30 - 40 °C
Fijne was
30 - 40 °C
1.5
Curtains and delicate clothing, dresses skirts, shirts and blouses.
Ye s
❉❉
——
❉❉
1000
1)
Daily load
40 °C
Gemengde was
40 °C
3.0
Slightly to normally soiled textiles made of cotton and/or synthetics.
Ye s
❉❉
❉❉
max.
Quick wash
30 °C
Snelwas
30 °C
3.0
Shortly worn outer clothing made of cotton, polyester, polyamide and
blends with cotton.
Ye s
❉❉
——
❉❉
max.
Wool
Cold - 40 °C
Wol
Koud - 40 °C
1.0
Only woollens, labelled with the Woolmark and identified as machine
washable.
Ye s
❉❉
——
❉❉
1000
1)
Handwash
40 °C
Handwas
40 °C
1.0
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
Ye s
❉❉
——
❉❉
400
2)
Lingerie
30 °C
Lingerie
30 °C
1.0
This programme is particularly suitable to treat delicate lingerie (use of a
laundry net strongly recommended).
Ye s
❉❉
——
❉❉
400
2)
Rinse & Spin Spoelen & Centrif.
6.0
Same as the last rinse and the final spin in the “Cotton” programme.
——
❉❉
——
❉❉
max.
Spin Centrifugeren
6.0
In this programme spinning is intensive. Same as the spin cycle in the “Cotton
programme.
——
——
max.
Short Spin Kort centrifugeren
1.0
In this programme spinning is gentle. Same as the spin cycle in the “Wool”
programme.
——
——
1000
1)
Drain Afpompen
——
Drain only - no spinning. Alternative method of terminating programme after
“Rinse Hold”.
——
D
H
C
F
G
E
B
A
I
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
E. Programme selector
F. “Start” button
G. Spin speed selector
H. Programme sequence indicator
I. “Reset” button
J. “Start delay” button
K. Time display
J
K
40105384GB.fm Page 1 Thursday, April 19, 2007 3:22 PM
Black process 45.0° 100.0 LPI
5019 401 05384
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives”
in your Instructions for Use.
1. Turn the
programme selector
to the desired
programme and temperature.
2. The
time display
shows the duration of the
chosen programme (in hours and minutes), and
the
“Start”
indication lamp
is flashing.
3. The indication lamp of the predefined
spin
speed
lights up.
Push the button(s) of any option(s) desired - the
respective indication lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Eco” button
With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption is achieved.
“Prewash” button
Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time
by approximately 15 min.
Do not use liquid detergent for the main wash
when activating the “Prewash” option.
“Easy ironing” button
Can be used together with “Cotton”,
“Synthetics” and “Daily load” programmes to
make ironing easier.
Increases the water quantity and the clothes are
spun very gently.
“Intensive rinse” button
More water is added and rinse cycle is prolonged.
This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with allergies.
“Rinse hold” button
The laundry remains in the last rinse water
without progressing to the final spin cycle to avoid
creasing and prevent colours from changing.
This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.
It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only.
If you select “Rinse hold” do not leave the laundry
items to soak for too long.
Note:
The programme stops to “Rinse hold” at
the time the “Rinse hold” light in the programme
sequence indication is on. The indication lamp
next to the
“Start”
button flashes.
CONSUMPTION DATA
Programme
Te m p e r a t u r e
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
*
Cotton / Hygienic + 95 6.0 59
**
1.90 2:00
Cotton 60 6.0 49 1.14 2:10
Cotton with “Eco”
***
60 6.0 49 1.02 2:20
Cotton 40 5.0 56 0.70 2:00
SuperEco 60 6.0 49 0.72 4:00
Synthetics 60 2.5 50
**
0.80 1:35
Synthetics 40 2.5 46 0.50 1:20
Delicates 30 1.5 60 0.50 0:45
Daily load 40 3.0 41 0.50 1:00
Quick wash 30 3.0 41 0.40 0:30
Wool 40 1.0 60 0.50 0:45
Handwash 40 1.0 45 0.50 0:40
Lingerie 30 1.0 45 0.40 0:40
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*
The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions
applicable at that time.
**
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
***
Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
SELECT ANY DESIRED OPTION
Terminate the “Rinse hold” option:
•Press the
“Start”
button; the programme will
terminate automatically with the final spin cycle
for the present wash programme.
If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain” programme
and press the
“Start”
button.
Variable spin” button
Every programme has a predefined spin speed.
Press the button to set another spin speed.
If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain
during rinse. The water is drained out only.
The “Start Delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper. Do not use liquid detergent
when activating the “Start Delay”.
Select programme, temperature and options.
Press the “Start Delaybutton to select the delay
time by 1 to 23 hours;
•Press the
“Start”
button.
The indication light next to the “Start Delay” button
flashes and the countdown of the delay time begins.
•The time delay indication disappears when the
programme starts and it is replaced by the
remaining programme time.
Once having pressed the
“Start”
button, the
number of hours preselected can be reduced by
pressing again the “Start Delay button.
To cancel the “Start Delay
..before you press the “Start” button:
Turn the programme selector to another
position or press the
“Reset”
button.
..after having pressed the “Start” button:
Press the
“Reset”
button for at least 3 seconds - the
start delay time disappears from the time display.
Open the tap and press the
“Start”
button. The
indication lamp next to the
“Start”
button lights up.
The programme sequence indicator shows the current
programme phase, running from left to right through
Wash, Rinse, Spin/Drain.
The time display shows the remaining programme
time. Due to variations in load and temperature of inlet
water, the remaining time is newly calculated in certain
programme phases. If this is the case, an animation
appears on the time display.
Before starting and after end of a programme, the
lamp lights to show that the door can be opened. As
long as a wash programme is running, the door
remains locked and must on no account be forced
open. In case you have an urgent need to open it
during a running programme, refer to “Cancel
(Reset) a running programme before the end”.
“Service”
Lighting up of the “Service” indication can be caused by
a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use; if
the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply.
Open the water tap; if the indication still lights up,
refer to the “Troubleshooting Guide” in the
Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned; in
the latter case refer to the Instructions for Use
(“Removing the Filter”).
All the lights of the programme sequence
indicator are off, and the “Door open
indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
1. Press the
“Start”
button to pause the
programme. The light flashes.
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the
“Start”
button again. The new
programme continues at the same position
where the previous programme was interrupted.
Do not add detergent for this programme.
The
“Reset”
button cancels a programme before
the end.
•Press the
“Reset”
button for at least 3
seconds. Any existing water is drained out
before the door can be opened.
START DELAY
PROGRAMME START
“DOOR OPEN” INDICATION
RED INDICATIONS
PROGRAMME END
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
40105384GB.fm Page 2 Thursday, April 19, 2007 3:22 PM
Black process 45.0° 100.0 LPI
  • Page 1 1
  • Page 2 2

Bauknecht SUPER ECO 1300 Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI