Tektronix P5205 is a high-voltage differential probe designed for use with oscilloscopes and other measurement instruments. It offers high common mode rejection, low input capacitance, and a wide bandwidth, making it ideal for a variety of applications, including power electronics, automotive, and telecommunications.
With a maximum input voltage of 1000 VRMS CAT II from ground on either input or ±1300 V (DC + peak AC) between the leads, the P5205 can safely measure high-voltage signals. The probe's 50X attenuation ratio provides a wide dynamic range, allowing it to measure signals from a few millivolts to several kilovolts.
Tektronix P5205 is a high-voltage differential probe designed for use with oscilloscopes and other measurement instruments. It offers high common mode rejection, low input capacitance, and a wide bandwidth, making it ideal for a variety of applications, including power electronics, automotive, and telecommunications.
With a maximum input voltage of 1000 VRMS CAT II from ground on either input or ±1300 V (DC + peak AC) between the leads, the P5205 can safely measure high-voltage signals. The probe's 50X attenuation ratio provides a wide dynamic range, allowing it to measure signals from a few millivolts to several kilovolts.
Tektronix P5205 is a high-voltage differential probe designed for use with oscilloscopes and other measurement instruments. It offers high common mode rejection, low input capacitance, and a wide bandwidth, making it ideal for a variety of applications, including power electronics, automotive, and telecommunications.
With a maximum input voltage of 1000 VRMS CAT II from ground on either input or ±1300 V (DC + peak AC) between the leads, the P5205 can safely measure high-voltage signals. The probe's 50X attenuation ratio provides a wide dynamic range, allowing it to measure signals from a few millivolts to several kilovolts.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI