Rehau 260166 is a 4-wire manifold valve actuator that can be installed vertically, horizontally, or inverted. It is designed to work with REHAU's PRO-BALANCE manifold and has a built-in dry-contact end switch that can be used to operate 24VAC relays for pumps and other devices. The actuator has a gray indicator on the top that shows the position (open/closed) and takes 3-4 minutes to fully open or close when power is applied or cut. It has an ambient operating temperature range of 32°F to 140°F (0°C to 60°C) and a low power draw of approximately 2 VA in operation.
Rehau 260166 is a 4-wire manifold valve actuator that can be installed vertically, horizontally, or inverted. It is designed to work with REHAU's PRO-BALANCE manifold and has a built-in dry-contact end switch that can be used to operate 24VAC relays for pumps and other devices. The actuator has a gray indicator on the top that shows the position (open/closed) and takes 3-4 minutes to fully open or close when power is applied or cut. It has an ambient operating temperature range of 32°F to 140°F (0°C to 60°C) and a low power draw of approximately 2 VA in operation.
Rehau 260166 is a 4-wire manifold valve actuator that can be installed vertically, horizontally, or inverted. It is designed to work with REHAU's PRO-BALANCE manifold and has a built-in dry-contact end switch that can be used to operate 24VAC relays for pumps and other devices. The actuator has a gray indicator on the top that shows the position (open/closed) and takes 3-4 minutes to fully open or close when power is applied or cut. It has an ambient operating temperature range of 32°F to 140°F (0°C to 60°C) and a low power draw of approximately 2 VA in operation.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI