2. Cabletron Systems
  3. SmartSwitch 6000

Cabletron Systems SmartSwitch 6000, 6C105, FE-100FX, FE-100TX Important Notice

  • Hello! I am an AI chatbot trained to assist you with the Cabletron Systems SmartSwitch 6000 Important Notice. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
IMPORTANT NOTICE
REGARDING THE FOLLOWING CABLETRON SYSTEMS PRODUCTS:
FE-100TX, FE-100FX, and FE-100F3
Under certain conditions it is possible for the
FE-100
uplink module to
experience problems when used in the
SmartSwitch 2000
and
6000
family of products.
Known issues are specific to the
FE-100
units produced after
2/15/98
.
These issues will be resolved by an upcoming release of firmware
(Revision 4.01.10 or later) for the
SmartSwitch 2000
and
6000
products.
For more information about this issue, please see Technical Bulletin
TB0354-9, which is available on the Cabletron web site at:
http://www.cabletron.com/support/techbltn/tb0354-9.html
(Over)
P/N 9032666-02
IMPORTANT NOTICE
REGARDING THE FOLLOWING CABLETRON SYSTEMS PRODUCTS:
FE-100TX, FE-100FX, and FE-100F3
Under certain conditions it is possible for the
FE-100
uplink module to
experience problems when used in the
SmartSwitch 2000
and
6000
family of products.
Known issues are specific to the
FE-100
units produced after
2/15/98
.
These issues will be resolved by an upcoming release of firmware
(Revision 4.01.10 or later) for the
SmartSwitch 2000
and
6000
products.
For more information about this issue, please see Technical Bulletin
TB0354-9, which is available on the Cabletron web site at:
http://www.cabletron.com/support/techbltn/tb0354-9.html
(Over)
P/N 9032666-02
IMPORTANT NOTICE
REGARDING THE FOLLOWING CABLETRON SYSTEMS PRODUCTS:
FE-100TX, FE-100FX, and FE-100F3
Under certain conditions it is possible for the
FE-100
uplink module to
experience problems when used in the
SmartSwitch 2000
and
6000
family of products.
Known issues are specific to the
FE-100
units produced after
2/15/98
.
These issues will be resolved by an upcoming release of firmware
(Revision 4.01.10 or later) for the
SmartSwitch 2000
and
6000
products.
For more information about this issue, please see Technical Bulletin
TB0354-9, which is available on the Cabletron web site at:
http://www.cabletron.com/support/techbltn/tb0354-9.html
(Over)
P/N 9032666-02
IMPORTANT NOTICE
REGARDING THE FOLLOWING CABLETRON SYSTEMS PRODUCTS:
FE-100TX, FE-100FX, and FE-100F3
Under certain conditions it is possible for the
FE-100
uplink module to
experience problems when used in the
SmartSwitch 2000
and
6000
family of products.
Known issues are specific to the
FE-100
units produced after
2/15/98
.
These issues will be resolved by an upcoming release of firmware
(Revision 4.01.10 or later) for the
SmartSwitch 2000
and
6000
products.
For more information about this issue, please see Technical Bulletin
TB0354-9, which is available on the Cabletron web site at:
http://www.cabletron.com/support/techbltn/tb0354-9.html
(Over)
P/N 9032666-02
To ensure full functionality of the
FE-100
when used with
SmartSwitch
2000
and
6000
products, it is recommended that the firmware be
upgraded when the new firmware release becomes available.
To register for automatic notification via e-mail upon release of this
firmware, please refer to the Cabletron Systems web site at:
http://www.cabletron.com/support/FE100/
For technical assistance with firmware upgrades, refer to your firmware
release notes or contact the Cabletron Systems Global Call Center at
(603) 332-9400.
To ensure full functionality of the
FE-100
when used with
SmartSwitch
2000
and
6000
products, it is recommended that the firmware be
upgraded when the new firmware release becomes available.
To register for automatic notification via e-mail upon release of this
firmware, please refer to the Cabletron Systems web site at:
http://www.cabletron.com/support/FE100/
For technical assistance with firmware upgrades, refer to your firmware
release notes or contact the Cabletron Systems Global Call Center at
(603) 332-9400.
To ensure full functionality of the
FE-100
when used with
SmartSwitch
2000
and
6000
products, it is recommended that the firmware be
upgraded when the new firmware release becomes available.
To register for automatic notification via e-mail upon release of this
firmware, please refer to the Cabletron Systems web site at:
http://www.cabletron.com/support/FE100/
For technical assistance with firmware upgrades, refer to your firmware
release notes or contact the Cabletron Systems Global Call Center at
(603) 332-9400.
To ensure full functionality of the
FE-100
when used with
SmartSwitch
2000
and
6000
products, it is recommended that the firmware be
upgraded when the new firmware release becomes available.
To register for automatic notification via e-mail upon release of this
firmware, please refer to the Cabletron Systems web site at:
http://www.cabletron.com/support/FE100/
For technical assistance with firmware upgrades, refer to your firmware
release notes or contact the Cabletron Systems Global Call Center at
(603) 332-9400.
/