Truetone V3 Series Operating instructions

Brand
Truetone
Model
V3 Series
Type
Operating instructions

Truetone V3 Series is the latest incarnation of the very first dual effect pedal for guitar players, released in 1997 by Bob Weil and Visual Sound. Redesigned from scratch, it meets the demands of today's players with more flexibility, great tones, and robust construction.

The pedal features two separate, switchable channels - Overdrive and Distortion - each with its own set of controls and capabilities, such as:

Overdrive Channel

  • Controls: DRIVE, TONE, VOL, BASS, CLEAN MIX
  • Delivers a wide range of overdrive sounds, from subtle and warm to aggressive and saturated
  • CLEAN MIX knob allows you to blend in a clean signal to taste

Truetone V3 Series is the latest incarnation of the very first dual effect pedal for guitar players, released in 1997 by Bob Weil and Visual Sound. Redesigned from scratch, it meets the demands of today's players with more flexibility, great tones, and robust construction.

The pedal features two separate, switchable channels - Overdrive and Distortion - each with its own set of controls and capabilities, such as:

Overdrive Channel

  • Controls: DRIVE, TONE, VOL, BASS, CLEAN MIX
  • Delivers a wide range of overdrive sounds, from subtle and warm to aggressive and saturated
  • CLEAN MIX knob allows you to blend in a clean signal to taste
Jekyll & Hyde
Jekyll & HydeJekyll & Hyde
Jekyll & Hyde
Instructions
Bob Weil and Visual Sound first introduced the Jekyll & Hyde pedal to the world in
1997. It was the first true dual effect pedal for guitar players, ever. It was an
immediate hit and the rest, as they say, is history.
Visual Sound is now
TRUETONE
, and the new V3 Series Jekyll & Hyde has been re-
designed from scratch by Weil and RG Keen to meet the demands of today’s players.
With more flexibility, more great tones, and better construction than any of its
predecessors, you’re going to love this new incarnation of a historically great pedal.
The following are some tips to get you started:
Distortion Controls:
- HI-GAIN: This is the “Drive” knob
- TREBLE, BASS, MID: You know what these are.
- VOL: …as in Volume.
- Bright: A is very bright and less compressed than B. Turn down the Treble knob a
bit when using A.
- Voice: A has much of the character of previous Jekyll & Hyde pedals. B is a new
sound which is more open and much louder.
Overdrive Controls:
- DRIVE: …as in Overdrive level.
- TONE: Not quite your typical tone knob, this one has a slight effect on gain as well
as treble as you turn it. Higher is more treble and gain, lower is less treble and gain.
Distortion
Overd
rive
- VOL: …as in Volume.
- BASS: You guessed it… this controls the bass level.
- CLEAN MIX: This is a single-knob mixer to allow you to mix clean signal with
overdrive signal. Fully counter-clockwise is 100% clean with no overdrive, fully
clockwise is 100% overdriven. In between… that’s where the magic is.
Internal Buffer On/Off: If you remove the bottom cover of the pedal, you will see a slide
switch for each channel which allows you to turn on/off the Pure Tone buffer circuit. We
recommend that you leave the first channel buffer on. However, if you want strictly true
bypass switching, you may turn both switches off.
Internal Noise Gate On/Off: There is a mini slide switch to turn the Distortion channel
noise gate on or off, inside the pedal, next to the Distortion footswitch. Just remove the
bottom cover of the pedal to see it.
Battery: You can use a battery, but… WHY? Use a 1 SPOT! If you must use a battery, please
remember to unplug BOTH In and Out when not using the pedal to conserve battery life.
IN and OUT:
Unlike previous versions of Jekyll & Hyde, the V3 version is really 2 pedals in 1 box. No,
seriously, it even has separate in’s and out’s if you want to use them. Check it out…
Normal
IN
OUT
IN
OUT #1
IN #2
OUT #2
Change
Order
IN
Distortion
OUT
Overdrive
OUT
Distortion
IN
Overdrive
Separate
Pedals
For demos, warranty registration and assistance, please go to:
www.Truetone.com
2015
  • Page 1 1
  • Page 2 2

Truetone V3 Series Operating instructions

Brand
Truetone
Model
V3 Series
Type
Operating instructions

Truetone V3 Series is the latest incarnation of the very first dual effect pedal for guitar players, released in 1997 by Bob Weil and Visual Sound. Redesigned from scratch, it meets the demands of today's players with more flexibility, great tones, and robust construction.

The pedal features two separate, switchable channels - Overdrive and Distortion - each with its own set of controls and capabilities, such as:

Overdrive Channel

  • Controls: DRIVE, TONE, VOL, BASS, CLEAN MIX
  • Delivers a wide range of overdrive sounds, from subtle and warm to aggressive and saturated
  • CLEAN MIX knob allows you to blend in a clean signal to taste
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents