Panasonic CS-PE9CKE Operating Instructions Manual

Panasonic
Brand
Panasonic
Model
CS-PE9CKE
Category
Split-system air conditioners
Type
Operating Instructions Manual

This manual is also suitable for

Before using your air-conditioner, please read
this operating instructions carefully and keep
it for future reference.
Air Conditioner
OPERATING INSTRUCTIONS
Indoor Unit Models:
CS-PE9CKE
CS-PE12CKE
Outdoor Unit Models:
CU-PE9CKE
CU-PE12CKE
F564285
ME67
MATSUSHITA AIR-CONDITIONING CORP.
XIECUN, ZHONGCUN TOWN, PANYU DISTRICT.
GUANGZHOU CITY, GUANGDONG PROVINCE, CHINA
PORTUGUÊS ............... P. 11
DEUTSCH ..................... P. 21
FRANÇAIS.................... P. 31
NEDERLAND................ P. 41
ITALIANO ..................... P. 51
GREEK ......................... P. 61
ESPAÑOL ..................... P. 71
RUSSIAN ...................... P. 91 —P. 90
ENGLISH ...................... P. 1
—P. 20
—P. 30
—P. 40
—P. 50
—P. 60
—P. 70
—P. 80
—P. 10
BULGARIAN ................. P. 81—P.101
CONTENTS
Safety Precautions .................................... 1~2
Installation Precautions
Operation Precautions
Names of Each Part..................................... 2~3
Indoor Unit
Outdoor Unit
Accessories
Basic Operation ......................................... 4~5
Setting the Timer ............................................6
Care and Maintenance .............................. 7~8
Cleaning the lndoor Unit and Remote Control
Cleaning the Air Filters
Cleaning the Front Panel
Pre-season lnspection
When the Air Conditioner is Not to Be Used
for an Extended Period of Time
Recommended lnspection
Helpful Information .........................................8
Auto Restart Control ......................................8
Energy Saving and Operation Hints ..............8
Trouble Shooting ............................................9
Normal Operation
Abnormal Operation
Call the Dealer lmmediately
Evaluation of the Performance ......................10
Safety Notes ...................................................10
Thank you very much for purchasing Panasonic
Split Type Room Air Conditioner. Before operating, please read the following
“Safety Precautions” carefully.
To prevent personal injury, injury to others and
property damage, the following instructions must be
followed.
Incorrect operation due to failure to follow instructions
will cause harm or damage, the seriousness of which
is classified as follow:
Warning
This sign warns of the possibility of death or
serious injury.
This sign warns of the possibility of injury or
damage to property.
The instructions to be followed are classified by the
following symbols:
This symbol (with a white background) denotes an
action that is PROHIBITED.
These symbols (with a black background) denote
actions that are COMPULSORY.
Installation Precautions
Warning
Caution
Ensure that the following installation
precautions have been applied before
installing the air conditioner.
1
Caution
Do not install, relocate or repair the
unit by yourself.
Improper installation may cause
leakege,electric shock or fire.
Please consult an authorized dealer
or specialist for the installation work.
This air conditioner must be earthed.or
specialist for the installation work.
Improper grounding could cause electric
shock or fire.
Ensure that the drainage pipings are
properly Water leakage could happen due to
improper connection thus cause inconvenience.
Replacement or installation of power
plugs shall be performed only by
authorised/quali-fied personnels.
The wires in this main lead are coloured in
accor-dance with the following code:
Green-and-yellow: Earth
Blue : Neutral
Brown : Live
Do not install the unit in a potentially
explosive atmosphere. Otherwise, fire
or other hazard may occur.
Self Diagnosis
Safety Precautions
Remote Control
5
1
3
4
2
2
Warning
Operation Precautions
Do not share outlet.
Do not insert plug to operate the unit. Do not
pull out plug to stop the unit.
Do not operate with wet hands.
Do not damage or modify the power cord.
Do not insert finger or other objects into the
indoor or outdoor units.
Do not expose directly to cold air for a long
period.
Do not touch the back of the outdoor unit by
hands.
Plug in properly.
Use specified power cord.
If abnormal condition (burnt smell, etc.)
occurs, switch off and unplug the power
supply.
Caution
Do not pull the cord to disconnect the plug.
Do not wash the unit with water.
Do not use for other purposes such as
preservation.
Do not use any combustible equipment at
airflow direction.
Do not sit or place anything on the outdoor unit.
Ventilate the room regularly.
Pay attention as to whether the installation
rack is damaged after long period of usage.
Switch off the power supply if the unit is not
used for a long period.
Names of Each Part
Indoor Unit Outdoor Unit
Inverter
3
1
4
5
6
7
8
910
11
Intake Grille
Remote Control Signal Receiver
Vertical Airflow Direction Louver
Horizontal Airflow Direction
Louver(manually adjusted)
Operation Indicator
Auto Operation/ Test Run Operation
If the remote control not available, press the
button for Auto Operation. Keeping this but-
ton depressed for more than 5 seconds to
start the Test Operation (Cool Operation) and
8 seconds to start the Test Operation (Heat
Operation), for the purpose of installation or
repairment only.
Air Filter
Air Outlet Vent
1
5
6
7
8
9
10
11
Air Inlet Vent
Pipes
Connecting Cables
Drain Hose
Air Outlet Vent
Accessories
Remote Control Two dry-cell batteries.
1
2
3
4
5
Switch off the power supply before cleaning.
ENGLISH
2
Air Intake Vent
3Power Supply Cord
4
Intake Grille Opener
2
Green
POWER
Orange
TIMER
hr
DELAY hr
DELAY
OFF ON
SELECT SET/CANCEL
ERROR RESET
ON OFF
AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
AUTO
AUTO
AB
OFF/ON TEMP
MODE
FAN SPEED
AIR SWING TIMER
AB
RESET
Panasonic
To Start the Operation
Press operation OFF/ON buton.
POWER indicator (green) on the indoor unit will
light up.
To stop, press operation OFF/ON once more.
Setting Mode
Press MODE to select:
AUTO – Automatic Operation
HEAT – Heating Operation
COOL – Cooling Operation
DRY – Soft Dry Operation
Setting Temperature
Press TEMP to increase or decrease the
temperature.
The temperature can be set between 16°C ~ 30°C.
Recommended setting temperature:
Heating : 20°C ~ 22°C
Cooling : 26°C ~ 28°C
Soft Dry : 22°C ~ 26°C
3
Names of Each Part
Remote Control
Fan Speed
AUTO
If the display is chaotic or can not be adjusted,
use a pin to gently press this button to reset the
remote control to the original set by manufacturer.
Unit Error Reset Button
Error Check Button
Display Panel
Operation Button
Operation Mode Selection Button
Fan Speed Selection
Airflow Direction Control Button
Remote Control Signal
Make sure it is not obstructed.
Maximum distance: 10 m.
Signal received sound.
One short beep or one long beep.
Notes for Remote Control
Direct the remote control towards the signal
receiver of the Indoor Unit.
Do not drop or throw the remote control.
Do not leave the remote control in a place subject to
direct sunlight or near heat sources such as radiator.
Do not get it wet.
How to Insert the Batteries
1Remove the remote control back cover completely
2Insert the batteries
– Be sure the direction is correct
About the Batteries
Can be used for approximately one year.
Observe the Following When Replac-
ing the Batteries
1Replace with two new batteries of the same type.
2Do not use rechargeable batteries (Ni-Cd).
3Remove the batteries if the unit is not to be used
for a long period.
Fan Speed Control
Press FAN SPEED to select:
AUTO
SUPER LOW
LOW
MEDIUM
HIGH
SUPER HIGH
Remote Control
Display
AUTO Fan Speed
Fan Speed
Fan Speed
Fan Speed
Fan Speed
Fan Speed
8
9
10
11
12
13
14
Signal Transmitter
Room Temperature Setting Button
Time Adjusting Button A
Time Adjusting Button B
Timer Selecting Button
Timer Setting/Cancellation Button
Remote Control Reset Button
1
2
3
4
5
6
7
hr
DELAY hr
DELAY
OFF ON
SELECT SET/CANCEL
ERROR RESET
ON OFF
1
2
3
4
5
6
7
8
10
11
12
13
14
9
AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
AUTO
AUTO
A B
OFF/ON TEMP
MODE
FAN SPEED
AIR SWING TIMER
A B
RESET
Panasonic
ENGLISH
2. Press operation OFF/ON button, the operation
lamp of the air conditioner will light up.
3. Press or button to set the room temperature.
Automatic Operation Soft Dry Operation
Notes: 1.The purposes of Soft Dry Operation : to
maintain the room temperature at the set
temperature, prior to dehumidification.
2.When setting the automatic airflow during Soft
Dry Operation, changes in speed and
movements of louvers, which swing in up and
down manner forms a natural breeze
condition.
3.During Soft Dry Operation, the fan will run at
Low fan speed, and on/off operation will occur
occasionally.
Recommendation : Select this mode in the rainy day or
when the humidity is high.
Heating Operation
Press or button to set the room temperature.
(Example) Setting Temp at 25oC
HEAT DRY COOL
13oC 19oC 23oC 25oC
Outdoor Temperature
36oC
32oC
22oC
18oC
16oC
Room Temperature
Notes:
Press operation selection
MODE button, the cursor
key points to AUTO
Press or
to set the room temperature.
1
Press operation OFF/ON
button, the operation
lamp of the air conditioner
will flash momentarily,
and then lights up.
2
3
button
.
2. Press operation OFF/ON button, the operation
lamp of the air conditioner will light up.
3. Press or button to set the room temperature.
Notes : 1.When setting the automatic airflow during
Cooling Operation, changes in speed and
movements of louvers, which swing in up and
down manner forms a natural breeze
condition.
Cooling Operation
Press operation selection
MODE button, the cursor
key points to DRY
1.During Automatic Operation, the operation
mode will be selected automatically in accordance
with the room temperature, outdoor air
temperature and set temperature of remote
control.
2.The operation mode changes every half hour
if necessary.
3
1
Press operation OFF/ON button, the operation
lamp of the air conditioner will flash momentarily,
and then lights up.
2
Press operation selection
MODE button, the cursor
key points to HEAT
1
2
3
2
3
Press operation selection
MODE button, the cursor
key points to HEAT
1
4
SELECT SET/CANCEL
ERROR RESET
AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
AUTO
AUTO
A B
OFF/ON TEMP
MODE
FAN SPEED
AIR SWING TIMER
A B
RESET
AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
AUTO
AUTO
A B
2
1
3
AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
AUTO
AUTO
A B
AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
AUTO
AUTO
A B
AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
AUTO
AUTO
A B
3. The recomended set temperature is 20~22°C.
Notes: 1. Heat is obtained from outdoor air to warm up
the room. When the outdoor ambient air
temperature falls, the heating capacity of the
unit might be reduced.
2. Defrosting Operation
Depend on the outdoor temperature, the
operation occasionally stops to melt the frost
on the outdoor unit.
2. The recomended set temperature is 26~28°C.
4.The recomended set temperature is 22~26°C.
Panasonic
Basic Operation
Setting the Vertical Airflow Direction
Press AIR SWING button to select auto airflow direction.
Cool/Dry: The vertical airflow louvers swing up and down to form a natural
breeze.
Manual Airflow Direction
Press AIR SWING button to select manual airflow direction.
5 stages can be obtained.
Heat: When the outlet air temperature is low, the vertical
airflow louvers will position a horizontal level and will be at
a downward position as the temperature increases.
Auto Airflow Direction
Ensure that the angles of the vertical airflow direction louvers are
adjusted by using the remote control. If it were manually adjusted,
the proper mechanism of the louvers may be affected. If such a case,
turn off the air conditioner temporarily and then restart the operation.
Heat: When the outlet air temperature is low, the vertical airflow louvers will
position a horizontal level and will be at a downward position as the
temperature increases.
When temperature rises.
When temperature is low.
During Cooling and Soft Dry operations, please avoid
the vertical airflow direction louvers from positioning in a
downward direction for a long period. Otherwise, if
condensation occured near the airflow direction louver
and air outlet vents, it may result in water dripping.
After the air conditioner stopped and restarted
immediately, the compressor will not operate within
3 minutes. (For compressor protection purposes.)
Inverter
To adjust the horizontal airflow direction, manually
move the Horizontal Airflow Direction Louver.
The Horizontal Airflow direction can be manually controlled.
Setting the Horizontal Airflow Direction
5
Notes:
SELECT SET/CANCEL
ERROR RESET
OFF/ON TEMP
MODE
FAN SPEED
AIR SWING TIMER
A B
RESET
AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
A B AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
A B
AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
A B
Panasonic
Basic Operation
hr
DELAY hr
DELAY
OFF ON
SELECT SET/CANCEL
ERROR RESET
AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
AUTO
AUTO
A B
OFF/ON TEMP
MODE
FAN SPEED
AIR SWING TIMER
A B
RESET
Setting the Timer
To start or stop the air conditioner automatically.
3
To Confirm the Timer Setting
Press the SET/CANCEL button once to activate the
timer operation which will start when the set time is
reached.
To Cancel the Timer Setting
Press the SET/CANCEL button to cancel the timer
operation.
Alternatively by pressing the OFF/ON button to cancel
the timer setting.
Delay OFF Timer
For example, to start the air conditioner 2 hours later.
Delay ON Timer
For example, to stop the air conditioner 3 hours later
and start 4 hours later.
Delay OFF Time and ON Timer
For example, to start the air conditioner 7 hours later
and stop 10 hours later.
Delay ON and OFF Timer
3
2
1
6
Press the SET/CANCEL button again to display
and activate the previous timer setting.
hr
DELAY
OFF
AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
AUTO
A B
hr
DELAY
OFF
SELECT SET/CANCEL
ERROR RESET
AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
AUTO
A B
OFF/ON TEMP
MODE
FAN SPEED
AIR SWING TIMER
A B
RESET
1
2
AUTO
AUTO
hr
DELAY
ON
AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
AUTO
AUTO
A B
hr
DELAY hr
DELAY
OFF ON
AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
AUTO
AUTO
A B
hr
DELAY hr
DELAY
ON OFF
AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
AUTO
AUTO
A B
SELECT SET/CANCEL
ERROR RESET
OFF/ON TEMP
MODE
FAN SPEED
AIR SWING TIMER
A B
RESET
hr
DELAY hr
DELAY
ON OFF
AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
AUTO
AUTO
A B
ENGLISH
1
To select the Delay OFF Timer, press the SELECT
button once.
Press the button A to select the delay hour.
For example, to stop the air conditioner 5 hours later.
2
1
To select the Delay OFF Timer, press the SELECT
button twice.
Press the button A to select the delay hour.
2
Press the button B to select delay hour for ON Timer.
To select the Delay OFF and ON Timer, press the button
SELECT 3 times.
Press the button A to select the delay hour for OFF Timer.
2
1
3
2
1
3
To select the Delay ON and OFF Timer, press the button
SELECT 4 times.
Press the button A to select the delay hour for ON Timer.
Press the button B to select delay hour for OFF Timer.
Panasonic
Panasonic
Panasonic
Periodical cleaning and maintenance are required in
order to maintain the air conditioner performance and
save electricity.
Care and Maintenance
Before cleaning or servicing, switch off
the power.
Caution
Do not get it wet to avoid
electric shock. Avoid using
water in any of the
circumstances.
Volatile liquid such as
thinner or benzene may
deteriorate the finishing of
the air conditioner.
THINNER
BENZENE
Clean the remote control and indoor unit
Wipe gently with a piece of soft, dry cloth.
Do not use water hotter than 40°C or polishing fluid
to clean the unit.
Clean the air filters
Recomendation: If the unit is operated in a dusty
enviroment, clean the filters every two weeks,
continuous use of these dirty filters will reduce cooling
or heating capacity.
1.Gently lift up the intake grille by the left and right
side.
2.Pull out the two air purifying filters.
3.Remove the dirt with a vacuum cleaner and wash
the back of the air filters with
water. Then dry it in shade.
If badly soiled, wash it with
soap or household
detergent.
4.Reinstall the air filters.
Be sure the "FRONT"
mark is facing you.
5.Close the intake grille.
Cleaning the Front Panel
(Must be removed before washing)
1Raise the front panel higher than the horizontal and
pull to remove it.
2Gently wash with water and a sponge.
3To fix the front panel, raise the front panel
horizontally, match the protruding portion on the
indoor unit to the fulcrum and push into place.
Do not press the front panel too
hard when washing.
When use kitchen cleaning fluid
(neutral detergent), rinse
thoroughly.
Do not dry the front panel under
direct sunlight.
Fulcrum
Front grille pivot
Damaged air filter.
Consult the nearest authorized dealer.
Part No.: CWD001127
7
80
ENGLISH
8
Pre-season Inspection
Is the discharged air cold/warm?
Operation is normal if 15 minutes after the start of
operation, the difference between the air intake
and outlet vents temperature is:
Cooling : 8°C or above
Heating : 14°C or above
Are the air intake or outlet vents of the indoor
or outdoor units obstructed?
Are the remote control batteries weak?
If the remote control display appears weak,
replace the batteries.
When the Air Conditioner is Not To Be Used
for an Extended Period of Time
1To dry the internal parts of the indoor unit,
operate the unit for 2 ~ 3 hours using:
Operation mode : cooling
Set temperature : 30°C
2Turn off the power supply and unplug.
3Remove the remote control batteries.
Recommended Inspection
After used over several seasons, the unit will
become dirty and thus decreases the unit's
performance. Depending on the operation
conditions, a dirty unit may produce odour and
dust may pollute dehumidification system.
Therefore, a seasonal inspection is recommended
in addition to regular cleaning. (Consult an
authorized dealer).
AUTO
Helpful Information
Auto Operation Button
Automatic Operation
If the remote control fails to function or has been
misplaced, press the Auto Operation button to
start the Automatic operation.
The Automatic operation will be activated
immediately once the Auto operation button is
pressed. However, temperature cannot be
adjusted in this operation.
The power indicator on the indoor unit will blink
until the operation mode is selected automatically.
To cancel this operation, press this button once more.
Remote Control Signal Receiving Sound
To switch off the beep (Signal Receiving Sound),
press the Auto Operation button for 10 seconds
continuously or longer.
Repeat the above steps if you want to switch on
the Signal Receiving Sound.
Timer Setting
When power failure occurs, the timer setting will be
cancelled. Once power is resumed, reset the timer.
Thunder and Lightning
This air conditioner is equipped with a built-in
surge protective device. However, in order to
further protect your air conditioner from being
damaged by abnormally strong lightning activity,
you may switch off the main power supply and
unplug from power socket.
Auto Restart Control
Energy Saving and Operation
Hints
Air Filters
Clean the air filters every 2 weeks.
Dirty filters may reduces cooling or heating
efficiency.
Keep All Doors and Windows Closed
Otherwise, cooling or heating performance will
be reduced and electricity cost is wasted.
Outdoor Unit
Do not block the air outlet vent. Otherwise, it will
lower the cooling or heating performance.
Avoid Direct Sunlight
Keep curtains or drapes closed to avoid direct
sunlight during cooling operation.
Inverter
ON
1 Beep
5 seconds 10 seconds
2 Beep
AUTO TEST RUN SOUND
Setting the Temperature
Set the temperature higher or lower than the
desired temperature.
Cooling Operation : 1°C higher
Heating Operation : 2°C lower
Approximately 10% of electricity can be saved.
If power is resumed after a power failure, the
operation will restart automatically after 3-4 minutes.
Operation will be restarted automatically under the
previous operation mode and airflow direction when
power is resumed as the operation is not stopped by the
remote control.
hr
DELAY hr
DELAY
OFF ON
SELECT SET/CANCEL
ERROR RESET
ON OFF
AUTO
HEAT
COOL
DRY
FAN
AIR
SWING
SPEED
AUTO
AUTO
AB
OFF/ON TEMP
MODE
FAN SPEED
AIR SWING TIMER
AB
RESET
Panasonic
9
Trouble Shooting
Normal Operation
Air conditioner has been restarted, but does not
operate for 3 minutes.
A sound like water flowing can be heard.
It seems that fog is coming out from the air
conditioner.
The room has a peculiar odour.
During Automatic Fan speed, indoor fan stops
occasionally.
The outdoor unit emits water or steam.
Operation stops for about 12 minutes during
heating operation (The power indicator blinks).
During heating operation, indoor fan may run at
on and off conditions.
Is it okay? This is the answer
This is to protect the air conditioner. Wait until the air
conditioner begins to operate.
This is the sound of refrigerant flowing inside the air
conditioner.
Condensation occurs when the airflow from the air
conditioner cools the room.
This may be a damp smell emitted by the wall, carpet,
furniture or clothing in the room.
This is to remove smell emitted by the surroundings.
In COOL/DRY operation, moisture in the air
condenses into water on the cool surface of outdoor
unit piping that causes dripping.
This is to melt the frost which has accumulated on the
outdoor unit (defrosting operating). This will take no
longer than about 12 minutes. Water drips from the
outdoor unit. Wait until this operation ends. (The
power indicator will light up).
(Frost will accumulates on the outdoor unit when the
outdoor temperature is low and humidity is high.)
This is to prevent undesired cooling effect during
heating operation.
Is it okay? Please check
The air conditioner does not operate.
Air conditioner produces loud noise during
operation.
The air conditioner does not cool or warm
effectively.
Has the circuit breaker been tripped?
Has the power plug been removed from the wall outlet?
Is the timer being used correctly?
Is the installation work slanted?
Is the front grille closed properly?
Has the temperature been set incorrectly?
Are the filters dirty?
Are the intake or outlet vents of the outdoor unit
obstructed?
Are all windows and doors closed?
Abnormal Operation
Self Diagnosis
When the Timer LED blinks indicating abnormality, keep
the check button on remote control depressed for 5
seconds to display error codes.
Press the TEMP UP or Down button to identify the error
code. Beep sound (4 times) will be heard for the correct
error code shown. Inform the error code to an authorized
dealer. If one of the fowllowing error codes is displayed,
temporary operation is possible.
Temporary Operation
1. Press the MODE button and select Heating or
Cooling.
2. Press the operation OFF/ON button
(‘beep! beep! beep! beep!’ sound is heard).
*Use the operation temporarily, until repairs can
be made.
Call The Dealer Immediately
If the following conditions occur, turn off and unplug
the main power supply, and then call the dealer
immediately.
Abnormal noise is heard during operation.
Water or foreign material gets into the remote
control by mistake.
Water leaks from the indoor unit.
Switches or buttons do not operate properly.
The circuit breaker switches off frequently.
Power supply cord and plug become
unusually warm.
Remote Control Display
Press this button
with a pin.
Error Code Allowable Temporary Operation
H23 Cooling
H27 Heating
H28 Cooling
ENGLISH
10
Evaluation of the Performance
Air intake vent
1) This appliance must be earthed.
2) If the supply cord is damaged or need to be replaced, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
3) Remove power plug or disconnect from the mains before servicing this appliance.
4) Do not repair by yourself .
In case of malfunction of this appliance, do not repair by yourself.
Contact to the sales dealer or service dealer for a repair.
5) Do not use in an explosive atmosphere.
Do not use this appliance in a potentially explosive atmosphere.
6) Disconnect the power plug (isolation from main power supply).
Disconnect the power plug from the receptacle, or switch off the breaker, or switch off the power, disconnect-
ing mains plug to isolate the equipment from the main power supply in case of an emergency.
DISCONNECT THE MAINS PLUG FROM THE SUPPLY SOCKET WHEN NOT IN USE , WHERE SUPPLY CONNETION IS VIA MAINS PLUG.
Airborne noise :
A-weighted sound pressure level of this appliance is less than 70dB(A) under the JIS C 9612 test conditions.
Maximum cooling operation
1 m from the unit
CAUTION
IMPORTANT
The wires in this power supply cord are coloured in accordance with the following code :
Green and Yellow : Earth
Blue : Neutral
Brown : Live
“As the colours of the wires in the power supply cord of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked by the
letter E or by safety earth symbol or coloured green and yellow.
The wire which is coloured blue must be connected to the terminal which is marked with letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with letter L or coloured red.”
Use this air conditioner under the following conditions:
DBT: Dry Bulb Temp Indoor Outdoor
WBT: Wet Bulb Temp DBT WBT DBT WBT
Maximum Temperature – Cooling
Minimum Temperature – Heating
Unit in °C
Operate the unit for 15 minutes or more;
Measure the temperature of the intake and outlet air;
The temperature difference is more than 8°C during
Cooling operation or more than 14°C during Heating
operation.
If the unit fulfils the above conditions, the unit is in normal
operation.
Thermometer
Air outlet vent
WARNING
7) This appliance is not intended for use by young children or infirm persons without supervision.
Maximum Temperature – Heating
Minimum Temperature – Cooling
32
16
30
2
23
11
-
-
43
16
24
-5
26
11
18
-6
8) Young children should be supervised to ensure that they do not play with the appliance.
Safety Notes
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Panasonic CS-PE9CKE Operating Instructions Manual

Panasonic
Brand
Panasonic
Model
CS-PE9CKE
Category
Split-system air conditioners
Type
Operating Instructions Manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents