NMS Communications PA Hyper-T3 DS3 User manual

Brand: NMS Communications

Model: PA Hyper-T3 DS3

Type: User manual

REGULATORY NOTICES

UNITED STATES

Federal Communications Commission (FCC)

FCC Part 15 Rules, Subpart B § 15.105

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at its own expense.

CANADA

Industry Canada ICES-003 Issue 2:

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulations.

Cet appareil numérique de Classe A respecte toutes les exigences du Règlement sur le matériel

brouilleur du Canada.

EUROPE

CE Compliance

The PA Hyper-T3 platform meets the following European Directives:

89/336/EEC EMC Directive

73/23/EEC Low Voltage Directive

To achieve CE compliance, be sure to select a host that already meets the EMC and Low Voltage

Directives before the addition of any optional board.

SAFETY REQUIREMENTS

UL/C-UL Listed Certifications

The PA Hyper-T3 platform is certified to meet Information Technology Equipment safety

standards UL 1950 3rd edition, CSA 22.2, No 950.

PA Hyper-T3 DS3

QUICK INSTALL

Static electricity can damage sensitive electronic components.

Discharge your body’s static electric charge by touching a grounded surface e.g., the metal area of the

computer chassis − before performing any hardware procedure.

The manufacturer assumes no liability for any damage caused directly or indirectly, by improper installation of

any components by unauthorized service personnel. If you do not feel comfortable performing the installation,

consult a qualified computer technician.

PACKAGE CONTENT

 PA Hyper-T3 DS3/T1 resource adapter with onboard CPU

 Rear Access I/O Adapter for rear access connection

 Quick Installation This document

DOCUMENTATION

The User’s Guide and the API Guide documentation are available on our website:

http://www.nmss.com/support/nms_support.nsf

(Product Manuals)

Natural MicroSystems - NNA

4200, La Périère, St-Hubert, Qc, Canada, J3Y 9G3

Tel. (450) 676-2977 Fax (450) 676-0360

http://www.nmss.com

9000-00063-01c

Picture does not exactly represent final product

INSTALLATION

HARDWARE

Before you proceed with the installation of the board, make sure that the backplane technology

matches with the board technology (power supply, busses, etc ...).

CompactPCI headers located on the backplane are fragile

Ensure that the board is properly inserted into the board guide and connectors are aligned with

its related slot. If there is any resistance, do not use force to engage the board

Installation:

When the system is up and running, it is important to install the Rear Access I/O Module first

then complete with the installation of the Front Module.

Removal:

When the system is up and running, it is important to remove the Front Module first then

complete with the removal of the Rear Access I/O Module.

Caution:

The Rear Access I/O Module must not be installed or removed as long as Front Module is

present in the system.

For complete information on hardware installation, refer to the User’s Guide.

SOFTWARE

For complete information on software installation, refer to the User’s Guide.

KNOWS BUGS

None at this time.

MAKING CONNECTIONS

DS3 CONNECTION

The physical media consists of two 75-ohm coaxial cable links (with RJ-59 BNC connectors), one

for each direction of transmission.

Insertion loss and phase characteristics for cables are as follows:

For complete specifications, please refer to ANSI T1.102-1993.

RS-232 CONNECTION

The RS-232 interface be connected to an RS-232 terminal or a PC running a terminal emulation

software. The interface is set as follows: 57600 bauds ; 8 data bits ; 1 stop bit ; No parity.

The RS-232 cable must be a shielded RS-232 Null-Modem cable with a female DB9 connector.

NOTE: The serial interface is for debug purposes only.

ETHERNET CONNECTION

The Ethernet connection must be made of an unshielded twisted pair (UTP) cable and a standard

RJ-45 connector.

The Ethernet interface is specified as follows: 10Mb/s ; Half-duplex.

NOTE: The Ethernet interface is for debug and maintenance purposes only.

REPAIRS

Any repair to this board must be carried out by NMS. If you suspect the equipment is malfunctioning, chec

the appropriate part of the User’s Guide to make sure that all installation procedures have been followe

correctly. If checking the installation procedures does not locate the problem, contact your field servic

representative or our home office.

For return of material, refer to the RMA section.

RMA –Return Material Authorization

 Check to see if the problem is due to a mistake or oversight in the installation process.

 Contact our Technical Services at (450) 676-2977 to confirm that it is a board problem.

 While observing correct static-safe handling procedures, disconnect all cables and remove the

board from the chassis. While the board is out, make a note of the serial number (located on a label

on the board).

 Contact the RMA coordinator at (450) 676-2977. Give the board’s serial number and a brief

description of the problem. The RMA coordinator will give you an RMA number and an estimated

return date.

 Pack the board in an anti-static shipping material. Include a printout of the brief description of the

problem.

 Ship the board to NMS at the following address. NMS is not responsible for risk of loss or damage

in transit.

Natural MicroSystems

4200, La Periere, St-Hubert, Qc, Canada, J3Y 9G3

NMS Communications PA Hyper-T3 DS3 User manual

Brand: NMS Communications

Model: PA Hyper-T3 DS3

Type: User manual

Download PDF

report

NMS Communications PA Hyper-T3 DS3 User manual

NMS Communications PA Hyper-T3 DS3 User manual

Other documents