EY7442X
14.4V Drill & Driver
TOUGH TOOL IP - IP56 Approval
High Power with 36Nm for applications with high torque
4-Brush Motor for High Power, outstanding speed stability and
Overheat Resistance
LED light and side handle for comfortable working
14.4V Drill & Driver "TOUGH TOOL IP" for heavy applications
Power Supply
Battery Without battery and charger
Power & Speed Mode
Max. Torque (Nm)
Instant torque 48.0
Stalling torque 36.0
Speed at No Load (rpm)
Low 40 - 410
High 110 - 1530
Clutch Stages 18 + Drill position
Chuck Size (mm) 13.0
Features
Variable Speed Control / Rever-
sible
yes
Electric motor brake yes
Ergonomic Design yes
Typical Application General construction
Carpentry
Installation
Maintenance
General Data
Dimensions (mm)
Width 63.0
Height 240.0
Length 218.0
Weight (kg, incl. battery) 2.05
/