Lancom Systems 62601 Datasheet

Category
Routers
Type
Datasheet
LANCOM 1781A
High-performance VPN router with integrated ADSL2+ modem for professional site connectivity
1
Fast Internet access and professional networking for smaller companies and branch offices
1
Integrated multimode ADSL2+ modem and energy-efficient Gigabit switch as per IEEE 802.3az
1
VPN site connectivity with 5 simultaneous IPsec VPN channels (25 channels optional)
1
Network virtualization with up to 16 virtual networks on one device (ARF)
1
Stateful-inspection firewall with intrusion detection/denial-of-service protection
1
High availability with optional 3G backup via USB
The professional VPN router LANCOM 1781A provides companies with secure Internet access and, thanks to the integrated ADSL2+ modem, it connects directly to a
standard DSL line without additional hardware. With its extensive VPN capabilities, the device provides secure, high-performance connectivity to branch offices and remote
workers. The four ports of the integrated Gigabit Ethernet switch ensure maximum performance and are also energy-efficient as per IEEE 802.3az: If no data is transmitted
over an interface, its power consumption shuts down automatically. The LANCOM 1781A supplies everything required of a modern enterprise network, such as comprehensive
Quality-of-Service capabilities and an object-oriented firewall.
More performance.
The LANCOM 1781A provides a balanced and modern hardware platform for reliable operation of enterprise networks around the clock. As a professional business router,
the device meets with high standards in the areas of network virtualization, security and VPN networking. At the same time its computing power, storage capacity and
the high-speed interfaces ensure excellent network performance even with heavy data traffic.
More security.
For connecting home offices or setting up multi-national branch networks - VPN specialist LANCOM stands for fast, secure and cost-effective communications. The LANCOM
1781A is ideal for offices or small businesses that want to set up a secure VPN: The router's VPN gateway supports five simultaneous IPsec channels, with support for 25
channels as an optional extra. Additionally, an object-oriented stateful-inspection firewall protects the network with intrusion prevention and Denial of Service protection.
Optionally available, the LANCOM Content Filter protects up to 100 users effectively while surfing the World Wide Web. Flexible bandwidth management guarantees the
availability of all applications (also in local networks) as these can be prioritized with a comprehensive range of Quality-of-Service features.
More management.
LCMS, the LANCOM Management System, is a free software package for the LANCOM 1781A. It caters for the configuration of the device, remote maintenance and
network monitoring. The central component of LCMS, LANconfig, is used to configure the LANCOM 1781A and other LANCOM devices on the network. The extensive
range of features and the configuration wizards make the router quick to set up. LANmonitor offers detailed, real-time monitoring of parameters, it provides access to log
files and statistics, and it can carry out a detailed trace-protocol analysis. Other functions in LCMS include the GUI for firewall setup, automatic backup of configurations
and scripts, and the intuitive folder structure with convenient search function.
More virtualization.
The LANCOM 1781A helps you to use your IT resources more effectively and to save costs. The device simultaneously supports multiple independent networks. This is made
possible by the powerful technology Advanced Routing and Forwarding (ARF). The ARF function on the LANCOM 1781A provides up to sixteen virtual networks, each with
its own settings for DHCP, DNS, routing and firewall. ARF allows multiple separate networks for different groups and applications to be operated on a single physical
infrastructure.
More reliability for the future.
LANCOM products are designed for a product life of several years and are equipped with hardware dimensioned for the future. Even reaching back to older product
generations, updates to the LANCOM Operating SystemLCOSare available several times a year, free of charge and offering major features. LANCOM offers unbeatable
safeguarding of your investment.
Firewall
Incoming/Outgoing Traffic inspection based on connection information. Trigger for firewall rules depending on backup status, e.g. simplified rule
sets for low-bandwidth backup lines. Limitation of the number of sessions per remote site (ID)
Stateful inspection firewall
Check based on the header information of an IP packet (IP or MAC source/destination addresses; source/destination ports, DiffServ attribute);
remote-site dependant, direction dependant, bandwidth dependant
Packet filter
Network Address Translation (NAT) based on protocol and WAN address, i.e. to make internal webservers accessible from WANExtended port forwarding
N:N IP address mapping for translation of IP addresses or entire networksN:N IP address mapping
The firewall marks packets with routing tags, e.g. for policy-based routing; Source routing tags for the creation of independent firewall rules for
different ARF contexts
Tagging
Forward, drop, reject, block sender address, close destination port, disconnectActions
Via e-mail, SYSLOG or SNMP trapNotification
Quality of Service
Dynamic bandwidth management with IP traffic shapingTraffic shaping
Dynamic reservation of minimum and maximum bandwidths, totally or connection based, separate settings for send and receive directions. Setting
relative bandwidth limits for QoS in percent
Bandwidth reservation
Priority queuing of packets based on DiffServ/TOS fieldsDiffServ/TOS
Automatic packet-size control by fragmentation or Path Maximum Transmission Unit (PMTU) adjustmentPacket-size control
Automatic or fixed translation of layer-2 priority information (IEEE 802.11p-marked Ethernet frames) to layer-3 DiffServ attributes in routing mode.
Translation from layer 3 to layer 2 with automatic recognition of IEEE 802.11p-support in the destination device
Layer 2/Layer 3 tagging
Security
Monitoring and blocking of login attempts and port scansIntrusion Prevention
Source IP address check on all interfaces: only IP addresses belonging to the defined IP networks are allowedIP spoofing
Filtering of IP or MAC addresses and preset protocols for configuration access and LANCAPIAccess control lists
Protection from fragmentation errors and SYN floodingDenial of Service protection
Detailed settings for handling reassembly, PING, stealth mode and AUTH portGeneral
Password-protected configuration access can be set for each interfacePassword protection
Alerts via e-mail, SNMP-Traps and SYSLOGAlerts
PAP, CHAP, MS-CHAP and MS-CHAPv2 as PPP authentication mechanismAuthentication mechanisms
Anti-theft ISDN site verification over B or D channel (self-initiated call back and blocking)Anti-theft
Adjustable reset button for 'ignore', 'boot-only' and 'reset-or-boot'Adjustable reset button
High availability / redundancy
VRRP (Virtual Router Redundancy Protocol) for backup in case of failure of a device or remote station. Enables passive standby groups or reciprocal
backup between multiple active devices including load balancing and user definable backup priorities
VRRP
For completely safe software upgrades thanks to two stored firmware versions, incl. test mode for firmware updatesFirmSafe
In case of failure of the main connection, a backup connection is established over ISDN. Automatic return to the main connectionISDN backup
Optional operation of an analog or GSM modem at the serial interfaceAnalog/GSM modem backup
Static and dynamic load balancing over up to 4 WAN connections. Channel bundling with Multilink PPP (if supported by network operator)Load balancing
Backup of VPN connections across different hierarchy levels, e.g. in case of failure of a central VPN concentrator and re-routing to multiple distributed
remote sites. Any number of VPN remote sites can be defined (the tunnel limit applies only to active connections). Up to 32 alternative remote
stations, each with its own routing tag, can be defined per VPN connection. Automatic selection may be sequential, or dependant on the last
connection, or random (VPN load balancing)
VPN redundancy
Line monitoring with LCP echo monitoring, dead-peer detection and up to 4 addresses for end-to-end monitoring with ICMP pollingLine monitoring
VPN
Enables IPsec VPN based on TCP (at port 443 like HTTPS) which can go through firewalls in networks where e. g. port 500 for IKE is blocked. Suitable
for client-to-site connections (with LANCOM Advanced VPN Client 2.22 or later) and site-to-site connections (LANCOM VPN gateways or routers
with LCOS 8.0 or later). IPSec over HTTPS is based on the NCP VPN Path Finder technology
IPSec over HTTPS
LANCOM 1781A
Features as of: LCOS 9.00
VPN
Max. number of concurrent active IPSec, PPTP (MPPE) and L2TPv2 tunnels: 5 (25 with VPN 25 Option). Unlimited configurable connections.
Configuration of all remote sites via one configuration entry when using the RAS user template or Proadaptive VPN.
Number of VPN tunnels
Integrated hardware accelerator for 3DES/AES encryption and decryptionHardware accelerator
Integrated, buffered realtime clock to save the date and time during power failure. Assures timely validation of certificates in any caseRealtime clock
Generates real random numbers in hardware, e. g. for improved key generation for certificates immediately after switching-onRandom number generator
One click function in LANconfig to create VPN client connections, incl. automatic profile creation for the LANCOM Advanced VPN Client1-Click-VPN Client assistant
Creation of VPN connections between LANCOM routers via drag and drop in LANconfig1-Click-VPN Site-to-Site
IPSec key exchange with Preshared Key or certificateIKE
X.509 digital multi-level certificate support, compatible with Microsoft Server / Enterprise Server and OpenSSL, upload of PKCS#12 files via HTTPS
interface and LANconfig. Simultaneous support of multiple certification authorities with the management of up to nine parallel certificate hierarchies
as containers (VPN-1 to VPN-9). Simplified addressing of individual certificates by the hierarchy's container name (VPN-1 to VPN-9). Wildcards for
certificate checks of parts of the identity in the subject. Secure Key Storage protects a private key (PKCS#12) from theft
Certificates
Automatic creation, rollout and renewal of certificates via SCEP (Simple Certificate Enrollment Protocol) per certificate hierarchyCertificate rollout
CRL retrieval via HTTP per certificate hierarchyCertificate revocation lists (CRL)
Check X.509 certifications by using OCSP (Online Certificate Status Protocol) in real time as an alternative to CRLsOCSP Client
XAUTH client for registering LANCOM routers and access points at XAUTH servers incl. IKE-config mode. XAUTH server enables clients to register
via XAUTH at LANCOM routers. Connection of the XAUTH server to RADIUS servers provides the central authentication of VPN-access with user
name and password. Authentication of VPN-client access via XAUTH and RADIUS connection additionally by OTP token
XAUTH
Configuration of all VPN client connections in IKE ConfigMode via a single configuration entryRAS user template
Automated configuration and dynamic creation of all necessary VPN and routing entries based on a default entry for site-to-site connections.
Propagation of dynamically learned routes via RIPv2 if required
Proadaptive VPN
3DES (168 bit), AES (128, 192 or 256 bit), Blowfish (128 bit), RSA (1024-4096 bit) and CAST (128 bit). OpenSSL implementation with FIPS-140
certified algorithms. MD-5, SHA-1, SHA-256, SHA-384 or SHA-512 hashes
Algorithms
NAT-Traversal (NAT-T) support for VPN over routes without VPN passthroughNAT-Traversal
VPN data compression based on Deflate compression for higher IPSec throughput on low-bandwidth connections (must be supported by remote
endpoint)
IPCOMP
Enables VPN connections from or to dynamic IP addresses. The IP address is communicated via ISDN B- or D-channel or with the ICMP or UDP
protocol in encrypted form. Dynamic dial-in for remote sites via connection template
LANCOM Dynamic VPN*
Enables the registration of IP addresses with a Dynamic DNS provider in the case that fixed IP addresses are not used for the VPN connectionDynamic DNS
DNS forwarding according to DNS domain, e.g. internal names are translated by proprietary DNS servers in the VPN. External names are translated
by Internet DNS servers
Specific DNS forwarding
Enables the use of IPv4 VPN over IPv6 WAN connectionsIPv4 VPN over IPv6 WAN
Content Filter (optional)
Activate the 30-day trial version after free registration under http://www.lancom.eu/routeroptionsDemo version
Worldwide, redundant rating servers from IBM Security Solutions for querying URL classifications. Database with over 100 million entries covering
about 10 billion web pages. Web crawlers automatically search and classify web sites to provide nearly 150,000 updates per day: They use text
classification by optical character recognition, key word searches, classification by word frequency and combinations, web-site comparison of text,
images and page elements, object recognition of special characters, symbols, trademarks and prohibited images, recognition of pornography and
nudity by analyzing the concentration of skin tones in images, by structure and link analysis, by malware detection in binary files and installation
packages
URL filter database/rating server*
Database based online check of web sites (HTTP/HTTPS). HTTPS websites are checked based on DNS names of HTTPS server certificates or based
on Reverse DNS lookup of IP addresses.
URL check*
Filter rules can be defined in each profile by collecting category profiles from 58 categories, for example to restrict Internet access to business
purposes only (limiting private use) or by providing protection from content that is harmful to minors or hazardous content (e.g. malware sites).
Clearly structured selection due to the grouping of similar categories. Content for each category can be allowed, blocked, or released by override
Categories/category profiles*
Each category can be given an optional manual override that allows the user to access blocked content on a case-by-case basis. The override
operates for a limited time period by allowing the category or domain, or a combination of both. Optional notification of the administrator in case
of overrides
Override**
Lists that are manually configured to explicitly allow (whitelist) or block (blacklist) web sites for each profile, independent of the rating server.
Wildcards can be used when defining groups of pages or for filtering sub pages
Black-/whitelist
LANCOM 1781A
Features as of: LCOS 9.00
Content Filter (optional)
Timeframes, blacklists, whitelists and categories are collected into profiles that can be activated separately for content-filter actions. A default
profile with standard settings blocks racist, pornographic, criminal, and extremist content as well as anonymous proxies, weapons/military, drugs,
SPAM and malware
Profiles
Timeframes can be flexibly defined for control over filtering depending on the time of day or weekday, e.g. to relax controls during break times for
private surfing
Time frames
Activation of the content filter by selecting the required firewall profile that contains content-filter actions. Firewall rules enable the flexible use of
your own profiles for different clients, networks or connections to certain servers
Flexible firewall action
Response pages displayed by the content filter in case of blocked sites, errors or overrides can be custom designed. Variables enable the inclusion
of current information such as the category, URL, and rating-server categorization. Response pages can be issued in any language depending on
the language set in the user's web browser
Individual display pages (for blocked, error,
override)
As an alternative to displaying the device's own internal response pages to blockings, errors or overrides, you can redirect to external web serversRedirection to external pages
Automatic notification of license expiry by e-mail, LANmonitor, SYSLOG or SNMP trap. Activation of license renewal at any time before expiry of
the current license (the new licensing period starts immediately after expiry of the current license)
License management
Display of the number of checked and blocked web pages by category in LANmonitor. Logging of all content-filter events in LANmonitor; log file
created daily, weekly or monthly. Hit list of the most frequently called pages and rating results. Analysis of the connection properties; minimum,
maximum and average rating-server response time
Statistics
Messaging in case of content-filter events optionally by e-mail, SNMP, SYSLOG or LANmonitorNotifications
Wizard sets up the content filters for a range of typical scenarios in a few simple steps, including the creation of the necessary firewall rules with
the corresponding action
Wizard for typical configurations
Simultaneous checking of HTTP(S) traffic for a maximum of 100 different IP addresses in the LANMax. users
Categorization is maintained by IBM. Neither IBM or LANCOM can guarantee full accuracy of the categorization.*) Note
The Override function is only available for HTTP websites.**) Note
VoIP
The SIP ALG (Application Layer Gateway) acts as a proxy for SIP communication. For SIP calls the ALG opens the necessary ports on the firewall for
the corresponding media packets. By using automatic address translation for devices inside the LAN, the use of STUN is no longer needed.
SIP ALG
Routing functions
IP and NetBIOS/IP multi-protocol routerRouter
Separate processing of 16 contexts due to virtualization of the routers. Mapping to VLANs and complete independent management and configuration
of IP networks in the device, i.e. individual settings for DHCP, DNS, Firewalling, QoS, VLAN, Routing etc. Automatic learning of routing tags for
ARF contexts from the routing table
Advanced Routing and Forwarding
HTTP and HTTPS server for configuration by web interfaceHTTP
DNS client, DNS server, DNS relay, DNS proxy and dynamic DNS clientDNS
DHCP client, DHCP relay and DHCP server with autodetection. Cluster of several LANCOM DHCP servers per context (ARF network) enables caching
of all DNS assignments at each router. DHCP forwarding to multiple (redundant) DHCP servers
DHCP
NetBIOS/IP proxyNetBIOS
NTP client and SNTP server, automatic adjustment for daylight-saving timeNTP
Policy-based routing based on routing tags. Based on firewall rules, certain data types are marked for specific routing, e.g. to particular remote
sites or lines
Policy-based routing
Dynamic routing with RIPv2. Learning and propagating routes; separate settings for LAN and WAN. Extended RIPv2 including HopCount, Output
Delay, Poisoned Reverse, Triggered Update for LAN (acc. to RFC 2453) and WAN (acc. to RFC 2091) as well as filter options for propagation of
routes. Definition of RIP sources with wildcards
Dynamic routing
DHCPv6 client, DHCPv6 server, DHCPv6 relay, stateless- and stateful mode, IPv6 address (IA_NA), prefix delegation (IA_PD), DHCPv6 reconfigure
(server and client)
DHCPv6
Layer 2 functions
VLAN ID definable per interface and routing context (4,094 IDs) IEEE 802.1qVLAN
Packets sent in response to LCOS service requests (e.g. for Telnet, SSH, SNTP, SMTP, HTTP(S), SNMP, etc.) via Ethernet can be routed directly to the
requesting station (default) or to a target determined by ARP lookup
ARP lookup
Automatic discovery of network topology in layer 2 networks (Link Layer Discover Protocol)LLDP
LANCOM 1781A
Features as of: LCOS 9.00
COM port server
COM-port server for DIN and USB interfaces. For multiple serial devices connected to it, the server also manages its own virtual COM ports via
Telnet (RFC 2217) for remote maintenance (works with popular virtual COM-port drivers compliant with RFC 2217). Switchable newline conversion
and alternative binary mode. TCP keepalive according to RFC 1122 with configurable keepalive interval, retransmission timeout and retries
COM port forwarding
USB print server
Host port for connecting USB printers via RAW-IP and LPD; bi-directional data exchange is possiblePrint server (USB 2.0)
LAN protocols
ARP, proxy ARP, BOOTP, LANCAPI, DHCP, DNS, HTTP, HTTPS, IP, ICMP, NTP/SNTP, NetBIOS, PPPoE (server), RADIUS, RIP-1, RIP-2, RTP, SIP, SNMP,
TCP, TFTP, UDP, VRRP
IP
NDP, stateless address autoconfiguration (SLAAC), stateful address autoconfiguration (with DHCPv6), router advertisements, ICMPv6, DHCPv6,
DNS, HTTP, HTTPS, PPPoE, RADIUS, TCP, UDP, SMTP
IPv6
IPv6
IPv4/IPv6 dual stackDual Stack
WEBconfig, HTTP, HTTPS, SSH, Telnet, DNS, TFTP, Firewall, RAS dial-inIPv6 compatible LCOS applications
WAN protocols
PPPoE, PPPoA, IPoA, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS), L2TPv2 (LAC or LNS) and IPoE (with or without DHCP), RIP-1, RIP-2, VLANADSL, Ethernet
IPv6 over PPP (IPv6 and IPv4/IPv6 dual stack session), IPoE (autoconfiguration, DHCPv6 or static)IPv6
6to4, 6in4, 6rd (static and via DHCP), Dual Stack Lite (IPv4 in IPv6 tunnel)Tunneling protocols (IPv4/IPv6)
WAN operating mode
ADSL1, ADSL2 or ADSL2+ with internal ADSL2+ modemxDSL
ADSL1, ADSL2 or ADSL2+ with external ADSL2+ modemxDSL (ext. modem)
UMTS/HSDPA with external module at the USB interfaceUMTS/HSDPA* (ext. module)
ISDN data or voice usage via internal ISDN interfaceISDN
Analog or GPRS operation via serial interfaceAnalog/GPRS (ext. modem)
A UMTS USB modem is not supplied. Supported UMTS USB modems at www.lancom.eu/umts-support*) Note:
Interfaces
1
Compliant to: ADSL2+ as per ITU G.992.5 Annex A/Annex B/Annex J/Annex M with DPBO, ADSL2 as per ITU G.992.3 Annex A/Annex B/Annex
J/Annex M, ADSL as per ITU.G.992.1 Annex A/Annex B
1
Supports one virtual ATM circuit (VPI, VCI pair) at a time
1
Compliant to: Deutsche Telekom U-R2 (1TR112)
WAN: ADSL2+
4 individual 10/100/1000 Mbps Ethernet ports; up to 3 ports can be operated as additional WAN ports with load balancing. Ethernet ports can be
electrically disabled within LCOS configuration. The ports support energy saving according to IEEE 802.3az
Ethernet ports
Each Ethernet port can be freely configured (LAN, DMZ, WAN, monitor port, off). LAN ports can be operated as a switch or separately. Additionally,
external DSL modems or termination routers can be operated as a WAN port with load balancing and policy-based routing. DMZ ports can be
operated with their own IP address range without NAT
Port configuration
USB 2.0 hi-speed host port for connecting USB printers (USB print server), serial devices (COM port server), USB data storage (FAT file system);
bi-directional data exchange is possible
USB 2.0 host port
ISDN BRI port (S0 bus)ISDN
Serial configuration interface / COM port (8 pin Mini-DIN): 9,600 - 115,000 baud, suitable for optional connection of analog/GPRS modems. Supports
internal COM port server and allows for transparent asynchronous transmission of serial data via TCP
Serial interface
LCMS (LANCOM Management System)
Configuration program for Microsoft Windows, incl. convenient Setup Wizards. Optional group configuration, simultaneous remote configuration
and management of multiple devices over ISDN dial-in or IP connection (HTTPS, HTTP, SSH, TFTP). A tree view of the setting pages like in WEBconfig
provides quick access to all settings in the configuration window. Password fields which optionally display the password in plain text and can
generate complex passwords. Configuration program properties per project or user. Automatic storage of the current configuration before firmware
updates. Exchange of configuration files between similar devices, e.g. for migrating existing configurations to new LANCOM products. Detection
and display of the LANCOM managed switches. Extensive application help for LANconfig and parameter help for device configuration. LANCOM
QuickFinder as search filter within LANconfig and device configurations that reduces the view to devices with matching properties. Central
configuration of each management port.
LANconfig
LANCOM 1781A
Features as of: LCOS 9.00
LCMS (LANCOM Management System)
Monitoring application for Microsoft Windows for (remote) surveillance and logging of the status of LANCOM devices and connections, incl. PING
diagnosis and TRACE with filters and save to file. Search function within TRACE tasks. Wizards for standard diagnostics. Export of diagnostic files
for support purposes (including bootlog, sysinfo and device configuration without passwords). Graphic display of key values (marked with an icon
in LANmonitor view) over time as well as table for minimum, maximum and average in a separate window, e. g. for Rx, Tx, CPU load, free memory.
Monitoring of the LANCOM managed switches. Flick easily through different search results by LANCOM QuickFinder
LANmonitor
Graphical user interface for configuring the object-oriented firewall in LANconfig: Tabular presentation with symbols for rapid understanding of
objects, choice of symbols for objects, objects for actions/Quality of Service/remote sites/services, default objects for common scenarios, individual
object definition (e.g. for user groups)
Firewall GUI
Voluntary automatic updates for LCMS. Search online for LCOS updates for devices managed by LANconfig on the myLANCOM download server
(myLANCOM account mandatory). Updates can be applied directly after the download or at a later time
Automatic software update
Management
Integrated web server for the configuration of LANCOM devices via Internet browsers with HTTPS or HTTP. Similar to LANconfig with a system
overview, SYSLOG and events display, symbols in the menu tree, quick access with side tabs. WEBconfig also features Wizards for basic configuration,
security, Internet access, LAN-LAN coupling. Online help for parameters in LCOS menu tree
WEBconfig
The LANCOM Layer 2 Management protocol (LL2M) enables an encrypted access between the command line interfaces of two LANCOM device
directly via a Layer 2 connection
LANCOM Layer 2 Management (emergency
management)
During rollout devices can be preset with project- or customer-specific settings. Up to two boot- and reset-persistent memory spaces can store
customized configurations for customer-specific standard settings (memory space '1') or as a rollout configuration (memory space '2'). A further
option is the storage of a persistent standard certificate for the authentication of connections during rollouts
Alternative boot configuration
Automtatic upload of appropriate firmware and configuration files on insertion of USB memory (FAT filesystem) into USB interfaces of LANCOM
routers with factory settings. The function can be activated to be used during operation of configured devices. The router checks the files dates
and versions against the current firmware before upload
Automatic update from USB
SYSLOG buffer in the RAM (size depending on device memory) to store events for diagnosis. Default set of rules for the event protocol in SYSLOG.
The rules can be modified by the administrator. Display and saving of internal SYSLOG buffer (events) from LANCOM devices with LANmonitor,
display only with WEBconfig
Device SYSLOG
Individual access and function rights for up to 16 administrators. Alternative access control on a per parameter basis with TACACS+Access rights
RADIUS user administration for dial-in access (PPTP/L2TP via PPP and ISDN CLIP). Support for RADSEC (Secure RADIUS) for secure communication
with RADIUS servers. RADIUS authentication can be used to log in to a device. In addition, users can be deactivated in the internal RADIUS server
without deleting them
User administration
Remote configuration with Telnet/SSL, SSH (with password or public key), browser (HTTP/HTTPS), TFTP or SNMP, firmware upload via HTTP/HTTPS
or TFTP
Remote maintenance
Support of TACACS+ protocol for authentication, authorization and accounting (AAA) with reliable connections and encrypted payload. Authentication
and authorization are separated completely. LANCOM access rights are converted to TACACS+ levels. With TACACS+ access can be granted per
parameter, path, command or functionality for LANconfig, WEBconfig or Telnet/SSH. Each access and all changes of configuration are logged.
Access verification and logging of SNMP Get and Set requests. WEBconfig supports the access rights of TACACS+ and choice of TACACS+ server
at login. LANconfig provides a device login with the TACACS+ request conveyed by the addressed device. Authorization to execute scripts and each
command within them by checking the TACACS+ servers database. CRON, action-table and script processing can be diverted to avoid TACACS+
to relieve TACACS+ servers. Redundancy by setting several alternative TACACS+ servers. Configurable option to fall back to local user accounts in
case of connection drops to the TACACS+ servers. Compatibility mode to support several free TACACS+ implementations
TACACS+
Support of RADIUS protocol for authentication of configuration access. Administrative privileges can be assigned for each administrator.RADIUS
A remote configuration for devices behind der LANCOM can be accomplished (after authentication) via tunneling of arbitrary TCP-based protocols,
e.g. for HTTP(S) remote maintenance of VoIP phones or printers of the LAN. Additionally, SSH and Telnet client allow to access other devices from
a LANCOM device with an interface to the target subnet if the LANCOM device can be reached at its command line interface
Remote maintenance of 3rd party devices
Remote maintenance over ISDN dial-in with calling-number checkISDN remote maintenance*
For downloading firmware and configuration files from a TFTP, HTTP or HTTPS server with variable file names (wildcards for name, MAC/IP address,
serial number), e.g. for roll-out management. Commands for live Telnet session, scripts or CRON jobs. HTTPS Client authentication possible by
username and password or by certificate
TFTP & HTTP(S) client
SSH-client function compatible to Open SSH under Linux and Unix operating systems for accessing third-party components from a LANCOM router.
Also usable when working with SSH to login to the LANCOM device. Support for certificate- and password-based authentication. Generates its own
key with sshkeygen. SSH client functions are restricted to administrators with appropriate rights. Telnet client function to login/administer third
party devices or other LANCOM devices from command line interface
SSH & Telnet client
HTML pages, images and templates for Public Spot pages, vouchers, information pages of the Content Filter can be stored on a USB memory (FAT
file system) in a specific folder as an alternative for the limited internal memory
Basic HTTP(S) file server
Option to choose if an uploaded certificate or the default certificate is used by the HTTPS serverHTTPS Server
Access rights (read/write) over WAN or LAN can be set up separately (Telnet/SSL, SSH, SNMP, HTTPS/HTTP), access control listSecurity
LANCOM 1781A
Features as of: LCOS 9.00
Management
Scripting function for batch-programming of all command-line parameters and for transferring (partial) configurations, irrespective of software
versions and device types, incl. test mode for parameter changes. Utilization of timed control (CRON) or connection establishment and termination
to run scripts for automation. Scripts can send e-mails with various command line outputs as attachments
Scripting
LoadFirmware, LoadConfig and LoadScript can be executed conditionally in case certain requirements are met. For example, the command
LoadFirmware could be executed on a daily basis and check each time if the current firmware is up to date or if a new version is available. In
addition, LoadFile allows the upload of files including certificates and secured PKCS#12 containers
Load commands
SNMP management via SNMPv2, new unified private MIB for all most current and future LANCOM devices with LCOS. Download link in WEBconfigSNMP
Scheduled control of parameters and actions with CRON serviceTimed control
Extensive LOG and TRACE options, PING and TRACEROUTE for checking connections, LANmonitor status display, internal logging buffer for SYSLOG
and firewall events, monitor mode for Ethernet ports
Diagnosis
Available for all LANCOM routers with integrated ISDN interface. LANCAPI provides CAPI 2.0 features for Microsoft Windows to utilize ISDN channels
over the IP network
LANCAPI
Softmodem for Microsoft Windows that makes use of LANCAPI to send and receive faxes via ISDNCAPI Faxmodem
Allows the programming of a customized wizard to simplify the rollout in projects. Support for customized templates and logos provide a way to
generate a brand specific look
Programmable Rollout Wizard
Statistics
Extensive Ethernet, IP and DNS statistics; SYSLOG error counterStatistics
The used data volume of WAN connections (PPP, IPoE, PPTP, L2TP, IPSec) can be monitored and different actions can be triggered once certain
thresholds are passed
Volume budget
Connection time, online time, transfer volumes per station. Snapshot function for regular read-out of values at the end of a billing period. Timed
(CRON) command to reset all counters at once
Accounting
Accounting information exportable via LANmonitor and SYSLOGExport
Hardware
1,1 lbs (500 g)Weight
12 V DC, external power adapter (230 V) with bayonet cap to protect against accidentally unpluggingPower supply
Temperature range 540° C; humidity 095%; non-condensingEnvironment
Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; 210 x 45 x 140 mm (W x H x D)Housing
None; fanless design without rotating parts, high MTBFFans
approx. 10 WattsPower consumption (max)
Declarations of conformity*
EN 60950-1, EN 55022, EN 55024CE
IPv6 Ready GoldIPv6
You will find all declarations of conformity in the products section of our website at www.lancom-systems.eu*) Note
Scope of delivery
Hardware Quick Reference (EN, DE), Installation Guide (DE/EN/FR/ES/IT/PT/NL)Manual
Data medium with firmware, management software (LANconfig, LANmonitor, LANCAPI) and documentationCD/DVD
1 Ethernet cable, 3 mCable
ADSL cable, 3mCable
ISDN cable, 3mCable
External power adapter (230 V), NEST 12 V/1.5 A DC/S, coaxial power connector 2.1/5.5 mm bayonet, temperature range from -5 to +45° C,
LANCOM item no. 110723 (EU)/LANCOM item no 110829 (UK)
Power supply unit
Support
3 years support via hotline and Internet KnowledgeBaseWarranty
Regular free updates (LCOS operating system and LANCOM Management System) via InternetSoftware updates
LANCOM 1781A
Features as of: LCOS 9.00
Options
LANCOM VPN-25 Option (25 channels), item no. 60083VPN
LANCOM Content Filter +10 user, 1 year subscriptionLANCOM Content Filter
LANCOM Content Filter +25 user, 1 year subscriptionLANCOM Content Filter
LANCOM Content Filter +100 user, 1 year subscriptionLANCOM Content Filter
LANCOM Content Filter +10 user, 3 year subscriptionLANCOM Content Filter
LANCOM Content Filter +25 user, 3 year subscriptionLANCOM Content Filter
LANCOM Content Filter +100 user, 3 year subscriptionLANCOM Content Filter
LANCOM Next Business Day Service Extension CPE, item no. 61411Advance Replacement
LANCOM 2-Year Warranty Extension CPE, item no. 61414Warranty Extension
LANCOM Public Spot Option (authentication and accounting software for hotspots, incl. Voucher printing through Standard PC printer), item no.
60642
Public Spot
LANCOM Fax Gateway Option activates 'hardfax' within the router. Supports 2 parallel fax channels with LANCAPI ('fax group 3' without use of
CAPI Faxmodem), item no. 61425
Fax Gateway
Extension of the LANCOM Public Spot (XL) Option for the connection to hotel billing systems with FIAS interface (such as Micros Fidelio) for
authentication and billing of guest accesses for 178x routers, WLCs, and current central-site gateways, item no. 61638
LANCOM Public Spot PMS Accounting Plus
LANCOM WLC Basic Option for Routers for up to 6 managed LANCOM access points or WLAN routers, item no. 61639LANCOM WLC Basic Option for Routers
For the devices LANCOM 1781EF, LANCOM 1781A, LANOM 1781-4G, LANCOM 1781A-3G and LANCOM 1781A-4G a management upto 12 access
points an Internet access below 24 Mbps is recommended
*) Note
Accessories
item no. 61639LANCOM WLC Basic Option for Routers
19" Rackmount-Adapter, Art.-Nr. 6150119" Rack Mount
For simple, theft-proof mounting of LANCOM devices with plastic housings, item no. 61349LANCOM Wall Mount
For simple, theft-proof mounting of LANCOM devices with plastic housings, item no. 61345LANCOM Wall Mount (White)
LANCOM Serial Adapter Kit, item no. 61500Analog modem backup/serial adapter
LANCOM Advanced VPN Client for Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, single license, item no. 61600VPN Client Software
LANCOM Advanced VPN Client for Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, 10 licenses, item no. 61601VPN Client Software
LANCOM Advanced VPN Client for Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, 25 licenses, item no. 61602VPN Client Software
LANCOM Advanced VPN Client for Mac OS X (10.5 Intel only, 10.6 or higher), single license, item no. 61606VPN Client Software
LANCOM Advanced VPN Client for Mac OS X (10.5 Intel only, 10.6 or higher), 10 licenses, item no. 61607VPN Client Software
Item number(s)
62012LANCOM 1781A (EU)
62013LANCOM 1781A (UK)
www.lancom.eu
LANCOM Systems GmbH I Adenauerstr. 20/B2 I 52146 Wuerselen I Germany I E-Mail [email protected] I Internet www.lancom.eu
LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change
without notice. No liability for technical errors and/or omissions. 7/2014
LANCOM 1781A
Features as of: LCOS 9.00
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Lancom Systems 62601 Datasheet

Category
Routers
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI