EXCEPTIONAL ENGINEERING | ROCK SOLID | EXTENSIVE TESTING
NEW
3001 Borham Ave. | Stevens Point, WI 54481, USA
Phone: 715.344.3482 | Toll-free: 800.487.9220 | Fax: 715.344.5209
Email: [email protected] | Website: www.gamberjohnson.com
This document, including images, may not be reproduced partly or fully without the expressed written consent of Gamber-Johnson’s Marketing Department.
© Copyright 2014 Gamber-Johnson LLC
Follow us on:
Placement
Seat
Congurations
Drilling Required Pole Weight Height Width Depth
Attaches to
the inboard
and outboard
passenger side
seat hooks
Bucket/ Split
Bench
No - attaches to seat hooks:
Chevrolet Silverado 1500
(2014-2015)
Chevrolet Silverado
2500/3500 (2015)
Chevrolet Tahoe (2015)
GMC Sierra 1500 (2014-2015)
GMC Sierra 2500/3500 (2015)
GMC Yukon (2015)
Lower Tube: DS-LOWER-9
Upper Pole: 7160-0178
Support Brace: 7160-0230
Motion Attachment:
7160-0220 (Mongoose)
Tubes/Poles and Motion
Attachments ordered separately
17.0 lbs 7.18” 19.0” 15.4”
Features:
• Heavy gauge steel construction for long-term durability
• Black powdercoat nish for maximum corrosion resistance
• One Oset Universal Mounting Step (Item No. DS-STEP) is already included with this vehicle base. However,
additional Oset Universal Mounting Steps can be ordered to stack on top of each other if needed.
• A Support Brace (Item No. 7160-0230) is highly recommended
Note:
• Rearward travel of the passenger seat is not aected, however there is limited forward seat travel
• This base will not work with the Chevrolet 3500 with a PTO, the recommended base is the 7160-0185.
Item No. 7160-0510
W
D
H
CHEVROLET SILVERADO 1500 20142015
CHEVROLET SILVERADO 2500/3500 2015
CHEVROLET TAHOE 2015
GMC SIERRA 1500 20142015
GMC SIERRA 2500/3500 2015
GMC YUKON 2015
/