superbrightleds com WPG Series User manual

WPG Series
Brand
superbrightleds com
Model
WPG Series
Type
User manual

The superbrightleds com WPG Series LED Wall Pack With Glass Lens is a versatile and durable lighting solution for both indoor and outdoor use. Its IP65 rating makes it resistant to dust and water, ensuring reliable performance even in harsh environments. With a wide range of color temperatures and wattages available, the WPG Series can cater to various lighting needs and preferences. Additionally, its 0-10V dimming capability (non-photocell models only) allows for precise control over light intensity.

The superbrightleds com WPG Series LED Wall Pack With Glass Lens is a versatile and durable lighting solution for both indoor and outdoor use. Its IP65 rating makes it resistant to dust and water, ensuring reliable performance even in harsh environments. With a wide range of color temperatures and wattages available, the WPG Series can cater to various lighting needs and preferences. Additionally, its 0-10V dimming capability (non-photocell models only) allows for precise control over light intensity.

LED Wall Pack With Glass Lens
Important: Read all instructions prior to installation.
User Manual
Installation: Mounting to Wall/Conduit
Dimensional Drawings
Photocell Wiring Diagram
Rev Date: V1 09/30/2021Rev Date: V1 09/30/2021
LED Wall Pack With Glass Lens
User Manual
5yr
WPG Series
WPG Series
Slide front cover down
on hinges
1/8” drill bit
Conduit
Mount to
junction box Screws
Quick connect terminal
Quick connect terminal
red (LED+)
black (LED-)
Junction box
red (LED+)
black (LED-)
red (LED+)
black (LED-)
Quick connect terminal
Slide front cover down
on hinges
1/8” drill bit
Conduit
Mount to
junction box
Screws
Quick connect terminal
Quick connect terminal
red (LED+)
black (LED-)
Junction box
red (LED+)
black (LED-)
red (LED+)
black (LED-)
Quick connect terminal
8.74" [222mm]
14.4" [365.7mm] 9.1" [231mm]
Important: Illustrations are also representative of photocell models.
Important: Illustrations are also representative of photocell models.
120 or 277 VAC Photocell
Opening Fixture
Installation: Mounting to J-box
LED Wall Pack With Glass Lens LED Wall Pack With Glass Lens
Important: Read all instructions prior to installation.
Important: Illustrations are also representative of photocell models.
Important: Illustrations are also representative of photocell models.
Important: Read all instructions prior to installation.
Specications
Included Parts Optional Accessories
Wire Diagram
1 - Foam Mounting Gasket
1 - Knockout Plug
5 - Wire Nuts
4 - M4 x 38 mm Phillips Screws
Note: Photocell equipped models also
include preinstalled photocell sensor,
which turns light on when ambient
light is below 30 lx.
Glare Shield (WPG-GS)
Rev Date: V1 09/30/2021Rev Date: V1 09/30/2021
WPG Series
• This product should be installed and serviced
by a certied electrician in accordance with
applicable national, state, and local building
and electrical codes.
• To reduce the risk of electric shock, ensure
that the main power source and circuit
breakers are switched o before performing
any installation or wiring procedures.
• Avoid looking directly into lamp when
illuminated.
• Ensure all mounts are securely attached and
will support the weightof the xture. Failure to
properly support xture may result in damage
or injury, for which the manufacturer does not
assume responsibility.
Safety Notes
WPG Series
Slide front cover down
on hinges
1/8” drill bit
Conduit
Mount to
junction box Screws
Quick connect terminal
Quick connect terminal
red (LED+)
black (LED-)
Junction box
red (LED+)
black (LED-)
red (LED+)
black (LED-)
Quick connect terminal
Slide front cover down
on hinges
1/8” drill bit
Conduit
Mount to
junction box Screws
Quick connect terminal
Quick connect terminal
red (LED+)
black (LED-)
Junction box
red (LED+)
black (LED-)
red (LED+)
black (LED-)
Quick connect terminal
Slide front cover down
on hinges
1/8” drill bit
Conduit
Mount to
junction box
Screws
Quick connect terminal
Quick connect terminal
red (LED+)
black (LED-)
Junction box
red (LED+)
black (LED-)
red (LED+)
black (LED-)
Quick connect terminal
Slide front cover down
on hinges
1/8” drill bit
Conduit
Mount to
junction box Screws
Quick connect terminal
Quick connect terminal
red (LED+)
black (LED-)
Junction box
red (LED+)
black (LED-)
red (LED+)
black (LED-)
Quick connect terminal
Slide front cover down
on hinges
1/8” drill bit
Conduit
Mount to
junction box Screws
Quick connect terminal
Quick connect terminal
red (LED+)
black (LED-)
Junction box
red (LED+)
black (LED-)
red (LED+)
black (LED-)
Quick connect terminal
WPG -50K28W-S -50K40W-S -50K60W-S -50K80W-S -50K100W- S - 50K120W- S
Operating
Temperature -4°–104° F (-20°–40° C)
IP Rating IP65
Dimming 0–10 V (non-photocell models only)
User Manual User Manual
Check product label for specific electrical
specifications related to installation.
Improper installation will void warranty.
Black
L L
N N
GND GND
White
Green
+ +
– –
Purple
Gray/Pink
Black
White
Green
Purple
Gray
100–277 VAC
Supply
0–10 V Dimmer
  • Page 1 1
  • Page 2 2

superbrightleds com WPG Series User manual

WPG Series
Brand
superbrightleds com
Model
WPG Series
Type
User manual

The superbrightleds com WPG Series LED Wall Pack With Glass Lens is a versatile and durable lighting solution for both indoor and outdoor use. Its IP65 rating makes it resistant to dust and water, ensuring reliable performance even in harsh environments. With a wide range of color temperatures and wattages available, the WPG Series can cater to various lighting needs and preferences. Additionally, its 0-10V dimming capability (non-photocell models only) allows for precise control over light intensity.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents