2. Shark
  3. NV831

Shark NV831 User manual

  • Hello! I've reviewed the Quick Start Guide for the Shark Powered Lift-Away NV831 vacuum cleaner. This document covers the assembly, basic operation, and maintenance of the device, including instructions on how to use the Lift-Away mode for portable cleaning and how to maintain the brushroll and filters. I am ready to answer your questions about it.
  • How do I empty the dust cup?
    How do I maintain the filters?
    How do I perform brushroll maintenance?
NV831_QSG_REV_Mv1
For questions or to register your product, contact us at
800-798-7398 or visit us online at sharkclean.com
@sharkcleaning
©2017 SharkNinja Operating LLC. LIFT-AWAY, POWERED LIFT-AWAY, and SHARK are registered trademarks of
SharkNinja Operating LLC. DUOCLEAN is a trademark of SharkNinja Operating LLC.
Easy access to your brushrolls.
Open the brushroll garage by sliding
back the release buttons. To close, insert
the tabs on the lid into the slots on the
nozzle, then press down both sides.
If the lid isn’t completely closed, the
headlights will flash.
MAINTENANCE
Empty dust cup after each use
Brushroll Maintenance
Remove any string, hair,
or debris that may be
wrapped around the
brushroll by running
scissors along the guide
on the brushroll.
Soft Roller Maintenance
Lift out the Soft Roller by pulling the tab
on the right side. Clear away any debris,
then slide the Soft Roller back into place.
NV831
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
QUICK
START
GUIDE
Use this Quick Start Guide
to learn about your new
vacuum’s great features.
POWERED
LIFT-AWAY
®
Empty
Release
Filter Maintenance
Wash filters to keep the
suction strong.
Rinse filters and allow to air-dry
completely. Tap loose dirt
from foam filters as needed
between washes.
See enclosed Owner’s Guide
for complete details on
removing and cleaning filters.
VERSATILE FLOOR-TO-CEILING CLEANING
A
B
C
D
E
ASSE M B LY
2
(Click)
1
(Click)
3
(Click)
4
(Click)
WHAT’S INSIDE:
UPRIGHT MODE LIFT-AWAY® MODE
ABOVE-FLOOR CLEANING IN LIFT-AWAY MODE
Use for carpet and hard-floor cleaning
Attach desired cleaning accessory
to wand or handle.
1. Insert wand into floor nozzle.
2. Insert handle into wand.
3. Place pod onto wand.
Slide down to connect.
4. Press hose into back of pod.
Use for portable cleaning
on stairs or above-floor areas
Wand
Release
Wand
Release
Handle
Release
Handle
A Handle
B Hose
C Vacuum Pod
D Wand
E Motorized Floor Nozzle
F Pet Multi-Tool
G Pet Power Brush
H Crevice Tool
F G H
Floor Type
Hard Floor
Carpet
Deep Carpet
Power Button
Hard Floor
Carpet
Deep Carpet
Place foot on floor nozzle andtilt handle back.
Choose appropriate floor setting and press power button.
Lift-Away
Release
Wand
Release
L
i
f
t
A
w
a
y
®
Wand
Release
Press Lift-Away Release button to lift
pod o floor nozzle. You are now ready
to clean those hard-to-reach places.
Attach any of the
specialized cleaning
accessories to the
handle or wand.
For complete instructions, see the enclosed Owner's Guide.
For additional parts and accessories, visit sharkaccessories.com
/