•Fitting: Pressed steel.
• Lamp type:PR36:Excluding:1xG13T8maximum9Wuorescenttube
PR37:Excluding:1xG13T8maximum18Wuorescenttube
PR38:Excluding:1xG13T8maximum22Wuorescenttube
•Voltage:220V - 240V ~ 50Hz.
•Protectionagainstelectricshock: Class 1
•IPRating: IP20
•Commercial/domesticuse.
•Notsuitableforoutdooruse.
•Notforuseinareasexposedtomoisture.
•MaximumAmbienttemperaturerange:20ºC - 40ºC
•Dimensions: PR36L: (L) 626mm x (W) 50mm x (H) 73mm
PR37L: (L) 1234mm x (W) 50mm x (H) 73mm
PR38L: (L) 1540mm x (W) 60mm x (H) 75mm
SPECIFICATIONS
PR36L/PR37L/PR38L-attachments:
Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbeexclusivelyreplaced
bythemanufacturerorhisserviceagentorasimilarqualiedpersoninordertoavoidahazard.
To ensure that you get maximum longevity and maximum use out of your luminaire, please ob-
serve the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire
mustbecarriedoutbyaqualiedelectrician,inaccordancewithSANS10142.Oncompletion
ofinstallation,ensurethattheCerticateofComplianceisupdated.
•Beforeconnectingthisluminaire,ensurethatvoltageindicatedontheratinglabelcorresponds
with the mains voltage in your home.
•Whenchangingthelamp,ensurethatthepoweristurnedoff.
•Thisluminaireischeckedinfullforconformitytothequalitystandardsandsafetyrequirements.
•Themanufacturer/supplierisnotresponsibleforanydamageofpropertiesandpersons,caused
by the incorrect use or installation of the luminaire.
•Shouldyoubeunsureofhowtoinstallthisluminairecorrectly,pleaseconsultaprofessional
electrician or your supplier for assistance.
•Ensureallitems/components,threadsandscrewsaretightlysecured.
IMPORTANT:
•Tamperingwiththisluminaire,IE.Usingsiliconsealersorincorrectcabling,willinvalidateyour
warranty.
•Whentheprotectionglassisdamaged,itshouldbereplacedimmediately.Theluminairemust
not be used without the protection glass.
•Pleasecheckwhethertheconnectionofthepowercordissafeandreliablebeforeinstallation.
•Alwaysensurethatthemainssupplyvoltageiscorrect.
•Alwaysreplacethelampwithoneofanidenticalrating.
IMPORTANT SAFEGUARDS
•Switchthepowersupplyoffbeforecommencingwiththeinstallation.
•Whendrillingisrequiredforfixingtheluminairetotherequiredsurfacepleaseensurethatno
pipes or cables are within the drilling area.
•ConnectthewiresasshowninfigureB.
•Iftheheatsleeveissuppliedwithyourluminaire,pleaseconnecttheincominglive,neutraland
earth supply wires.
•Connecttheearth(green/yellow)supplywiringtotheearthterminal“E”.
•Connectthelive(brown/red)supplywiringtotheconnectorblockmarked“L”.
•Connecttheneutral(blue/black)supplywiringtotheconnectorblockmarked“N”.
•Ensureallitems/components,threadsandscrewsaretightlysecured.
•Ensusethelampsareseatedcorrectly.Locateandtwist
•Reconnectpowersupply.
INSTALLATION
CLEANING
•Beforecleaningalwaysensurethepowersupplyisturnedoff.
•Donotimmersetheluminaireinwater.
•Noabrasiveproducts,solvents,detergentmaybeusedtocleanthisluminaire.
•Ensurethatthefittingdoesnotcomeincontactwithcorrosivechemicals,etc.
•Coastalareasensurethattheluminaireiscleanedfortnightly.
•Ensurethatyoudonotplacetheluminairenearanycombustiblematerialsand/orsurfaces.
•Chokinghazard:Maycontainsmallparts.Keepawayfromchildren.
•Donotinsertyourngersoranypartofyourbodyintotheelectricalcontactandsocketsofthis
product whilst it is connected to the electricity supply.
•Itemmayvaryslightlyfromthepictureonthecarton.
•Coastalhumiditymayeffectthelongevityoftheluminaire.
•Outdoorluminairesmustbecleanedtopreventrustoccurring.