Filter Choke Indicator
54
f
1 The function of the filter is to clean the air in the room. In this
process it absorb all the dust from the air and releases clean and
fresh air.
Now this result in accumulation of dust in filter and it requires to be
cleaned after a particular interval of time else it will get choked. For this,
filter choke indicator function is provided.
2 Filter choke indicator reminds to clean filter.
3 The indicator appears after every 336 hours of working time of the
fan motor.
4 If is blinking several times, pull out filter from front panel and clean
the filter.
Refer page E-16 to clean the filter.
5 To reset filter choke indicator option, press temp.
buttons 3seconds at the same time, displaying LED letter will be
changed to previous mode.
Note: The reset option is only present in the control box membrane and
not in the remote control.
6 If you have already cleaned the filter before the indicator appears
(e.g. After 200hrs) the indicator still appears aft r 336hrs. To ree move
this indicator reset the indicator using step2.
C h
C h
and
C h
C h