Cleveland Range CST1010MOB Datasheet

Cleveland Range
Brand
Cleveland Range
Model
CST1010MOB
Type
Datasheet

Cleveland Range CST1010MOB is a piece of commercial kitchen equipment designed to provide a sturdy and stable base for your combi oven-steamer. Constructed from durable stainless steel, this stand features adjustable feet for leveling on uneven surfaces, ensuring stability. The stand comes with spacers to accommodate the legs of the combi oven-steamer securely and includes a stationary shelf at the bottom for additional storage.

Cleveland Range CST1010MOB is a piece of commercial kitchen equipment designed to provide a sturdy and stable base for your combi oven-steamer. Constructed from durable stainless steel, this stand features adjustable feet for leveling on uneven surfaces, ensuring stability. The stand comes with spacers to accommodate the legs of the combi oven-steamer securely and includes a stationary shelf at the bottom for additional storage.

Cleveland
™
P
roject ________________________________
Item __________________________________
Quantity _______________________________
F
CSI Section ____________________________
A
pproval _______________________________
D
ate __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: Steam@ClevelandRange.com
COMBI OVEN-STEAMER
Options & Accessories
25” EQUIPMENT STAND OPEN TYPE STAND,
ALL STAINLESS STEEL CONSTRUCTION
Cleveland Standard Features
II
Spacers provided for securing MINI legs into proper position
and accomodating utilities
II
All stainless steel welded construction with 1
1
⁄4˝ square tubing
II
Stationary shelf provided at bottom of stand
II
Adjustable feet (rear feet are flanged for floor bolting)
Note: Not indended for stacking units.
Options & Accessories
Ë Pull-Out Shelf Kit (111724)
Ë Pan Rack Kit (111726)
Ë Stainless Steel Wire Shelves (WS5)
Ë Stainless Steel Perforated Cafeteria Pans (PP)
Ë Stainless Steel Solid Cafeteria Pans (SP)
MODEL: CST1010MOB
Only used for model OES 10.10 mini.
ITEM NUMBER __________________________________________
JOB NAME / NUMBER __________________________________
Short Form Specifications
Shall be a Cleveland 34” high Equipment Stand CST310OB with: Cups provided
for securing unit into proper position and accomodating utilities; All stainless
steel welded construction with 11⁄4” square tubing; Stationary shelf at bottom of
stand; Adjustable feet (rear feet are flanged for floor bolting).
SECT. IIB PAGE 22
0810
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Cleveland Range equipment is built to comply with applicable standards for manufacturers.
SECT. IIC PAGE 23
0810
Shown with optional Pull-out Shelf
and optional Pan Racks
Shown with optional Pull-out Shelf,
optional Pan Racks, and optional
Top Shelf
8.81
7.81
in
/
223.8
198.4
mm
UNISTAND34 EQUIPMENT STAND
UNISTAND25 STACKING STAND
3
4.25
33.25
in
/
8
70.0
844.6
mm
8.81
7.81
in
/
223.8
198.4
mm
Shown with optional Pull-out Shelf
and optional Pan Racks
21.75 in / 552.5 mm 30.00 in / 762.0 mm
Shown with optional Pull-out Shelf,
optional Pan Racks
CST-08-OB MINI EQUIPMENT STAND
3
4.25
33.25
in
/
8
70.0
844.6
mm
8.81
7.81
in
/
223.8
198.4
mm
21.75 in / 552.5 mm 30.00 in / 762.0 mm
Shown with optional Pull-out Shelf,
optional Pan Racks
CST310OB MINI EQUIPMENT STAND
3
4.25
33.25
in
/
8
70.0
844.6
mm
8.81
7.81
in
/
223.8
198.4
mm
21.75 in / 552.5 mm 30.00 in / 762.0 mm
Shown with optional Pull-out Shelf,
optional Pan Racks
CST1010MOB MINI EQUIPMENT STAND
26.23
25.23
in
/
666
641
mm
8.81
7.81
in
/
223.8
198.4
mm
21.75 in / 552.5 mm 30.00 in / 762.0 mm
2
1.75 in / 552.5 mm 30.00 in / 762.0 mm
26.25
25.25
in
/
666.8
641.4
mm
  • Page 1 1
  • Page 2 2

Cleveland Range CST1010MOB Datasheet

Cleveland Range
Brand
Cleveland Range
Model
CST1010MOB
Type
Datasheet

Cleveland Range CST1010MOB is a piece of commercial kitchen equipment designed to provide a sturdy and stable base for your combi oven-steamer. Constructed from durable stainless steel, this stand features adjustable feet for leveling on uneven surfaces, ensuring stability. The stand comes with spacers to accommodate the legs of the combi oven-steamer securely and includes a stationary shelf at the bottom for additional storage.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents