2. Glastender
  3. LP48

Glastender LP48, LP48-L1-BL(LR), LP72, LP96 Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Glastender LP48 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Low Prole Coolers
Two, Three and
Four Door Remote
• Remote unit
• All stainless steel interior construction with radius inte
-
rior corners for easy cleaning
• CFC free foamed-in-place insulation
• Galvanized steel sub-top
• Black vinyl-clad steel exterior front and sides
• Stainless steel die cast handle
• Stainless steel evaporator housing with separate removable
evaporator drain pan
• Leg sockets recessed into base
• 1/2″thickABSplasticthresholdscuffplate
• 180º swinging doors
Printed in USA Rev. 11-19-07
Specications subject to change without notice. For current specications please visit our website.
Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Approval/Notes:
Project:
Item #: Qty:
Model #:
4.07
AIA#
SIS#
Electrical
• 120V, 1 phase, 60 Hz
• Dedicated 15 amp circuit is required
• 14 gauge wire connection is made inside the cooler next
to evaporator housing - interior access is through one of
the 3/4” side knock-out holes (electrician’s choice)
Refrigeration
• R134a or R404a expansion valve & temperature control
included. Specify type required when ordering.
• Recommended condensing unit:
LP48 - 1/4 HP which has an approximate rating of 2,200
BTU/H at +20ºF evaporator temperature
LP72 and
LP96 - 1/3 HP which has an approximate rating of
3,064 BTU/H at +20ºF evaporator temperature
• All refrigeration hookups are made at the installation site
Plumbing
• Atenfootlengthof1/2″IDby5/8″ODplastictubingis
provided to drain condensate. The tubing should exit
throughoneofthe3/4″sideknock-outholes(installer’s
choice). The maximum drainage is one ounce per hour -
consult local codes for compliance - a floor drain may be
required
Shelving
• Oneadjustablecoatedshelfandonebottomcoatedrack
per door included
Legs
• 1-5/8″diameter
• Stainless steel bullet feet
Materials
• 22 gauge stainless steel parts include: interior floor, walls,
ceiling, front of cabinet, and evaporator housing
• 22 gauge black vinyl-clad parts include: sides and standard doors
• 22 gauge galvanized steel parts include: exterior sub-top
and back
• 16 gauge stainless steel parts include: legs
• 16 gauge galvanized steel parts include: base
• 16 gauge zinc plated CR steel parts include: leg sockets
• 12 gauge stainless steel parts include: hinges,
hinge brackets, and lock brackets
Standard Features
Specications
NSF standard 7 listed for open food storage
† Specify a hinge location for each door
LP48-L1-BL(LR)
Door Style:
B = Black vinyl-clad
U = Unlaminated
L = Laminated
S = Stainless
G = Glass
X = Stainless Glass
Y = Laminated Glass
Top Style:
N = No finished top
L = Laminated
S = Stainless
D = Drainboard
Door Hinge Location†:
(from left to right)
L = Left or R = Right
LP__-_ _-_ _ (___)
COMPONENT
Refrigeration
Hook-Up Location:
L = Left or R = Right
Base Height:
1 = 1"
6 = 6" Legs
Size
48 = 48" Two Door
72 = 72" Three Door
96 = 96" Four Door
Dimensional Information
Remote Low Prole Coolers
LP72
5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Printed in USA
LP48
LP96
Side View All Models
Model Capacity:
12 oz. bottle
Refrigeration Voltage
LP48 10.5 cases 1/4 H.P.
Recommended
120v /
60 Hz /
1 phase
LP72 16.34 cases 1/3 H.P.
Recommended
120v /
60 Hz /
1 phase
LP96 22.16 cases 1/3 H.P.
Recommended
120v /
60 Hz /
1 phase
Plan View
Front Elevation
Plan View
Front Elevation
Front Elevation
Plan View
29"
22 1/2"
16 1/2"
1 1/2"
45"
48"
EVAPORATOR
HOUSING
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
23 3/4"
21"
DOOR
OPENING
29"
22 1/2"
1 1/2"
69"
72"
EVAPORATOR
HOUSING
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
DOOR
OPENING
21"
23 3/4"
16 1/2"
29"
43 1/4"
16 1/2"
1 1/2"
93"
96"
EVAPORATOR
HOUSING
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
DOOR
OPENING
21"
23 3/4"
29"
29"
24"
21"
24 3/4"
20 3/4"
EVAPORATOR
HOUSING
180
SWING
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
48"
6"
4 1/2" 4 1/2"
2 3/8"
22 1/2"
25 1/4"22 3/4"
25 1/4"
STANDARD CABINET
WITH OPTIONAL 6" LEGS
/