Glastender LP48 Datasheet

Glastender
Brand
Glastender
Model
LP48
Type
Datasheet

This manual is also suitable for

Low Prole Coolers
Two, Three and
Four Door Remote
• Remote unit
• All stainless steel interior construction with radius inte
-
rior corners for easy cleaning
• CFC free foamed-in-place insulation
• Galvanized steel sub-top
• Black vinyl-clad steel exterior front and sides
• Stainless steel die cast handle
• Stainless steel evaporator housing with separate removable
evaporator drain pan
• Leg sockets recessed into base
• 1/2″thickABSplasticthresholdscuffplate
• 180º swinging doors
Printed in USA Rev. 11-19-07
Specications subject to change without notice. For current specications please visit our website.
Glastender, Inc. • 5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Approval/Notes:
Project:
Item #: Qty:
Model #:
4.07
AIA#
SIS#
Electrical
• 120V, 1 phase, 60 Hz
• Dedicated 15 amp circuit is required
• 14 gauge wire connection is made inside the cooler next
to evaporator housing - interior access is through one of
the 3/4” side knock-out holes (electrician’s choice)
Refrigeration
• R134a or R404a expansion valve & temperature control
included. Specify type required when ordering.
• Recommended condensing unit:
LP48 - 1/4 HP which has an approximate rating of 2,200
BTU/H at +20ºF evaporator temperature
LP72 and
LP96 - 1/3 HP which has an approximate rating of
3,064 BTU/H at +20ºF evaporator temperature
• All refrigeration hookups are made at the installation site
Plumbing
• Atenfootlengthof1/2″IDby5/8″ODplastictubingis
provided to drain condensate. The tubing should exit
throughoneofthe3/4″sideknock-outholes(installer’s
choice). The maximum drainage is one ounce per hour -
consult local codes for compliance - a floor drain may be
required
Shelving
• Oneadjustablecoatedshelfandonebottomcoatedrack
per door included
Legs
• 1-5/8″diameter
• Stainless steel bullet feet
Materials
• 22 gauge stainless steel parts include: interior floor, walls,
ceiling, front of cabinet, and evaporator housing
• 22 gauge black vinyl-clad parts include: sides and standard doors
• 22 gauge galvanized steel parts include: exterior sub-top
and back
• 16 gauge stainless steel parts include: legs
• 16 gauge galvanized steel parts include: base
• 16 gauge zinc plated CR steel parts include: leg sockets
• 12 gauge stainless steel parts include: hinges,
hinge brackets, and lock brackets
Standard Features
Specications
NSF standard 7 listed for open food storage
† Specify a hinge location for each door
LP48-L1-BL(LR)
Door Style:
B = Black vinyl-clad
U = Unlaminated
L = Laminated
S = Stainless
G = Glass
X = Stainless Glass
Y = Laminated Glass
Top Style:
N = No finished top
L = Laminated
S = Stainless
D = Drainboard
Door Hinge Location†:
(from left to right)
L = Left or R = Right
LP__-_ _-_ _ (___)
COMPONENT
Refrigeration
Hook-Up Location:
L = Left or R = Right
Base Height:
1 = 1"
6 = 6" Legs
Size
48 = 48" Two Door
72 = 72" Three Door
96 = 96" Four Door
Dimensional Information
Remote Low Prole Coolers
LP72
5400 N Michigan Rd • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Printed in USA
LP48
LP96
Side View All Models
Model Capacity:
12 oz. bottle
Refrigeration Voltage
LP48 10.5 cases 1/4 H.P.
Recommended
120v /
60 Hz /
1 phase
LP72 16.34 cases 1/3 H.P.
Recommended
120v /
60 Hz /
1 phase
LP96 22.16 cases 1/3 H.P.
Recommended
120v /
60 Hz /
1 phase
Plan View
Front Elevation
Plan View
Front Elevation
Front Elevation
Plan View
29"
22 1/2"
16 1/2"
1 1/2"
45"
48"
EVAPORATOR
HOUSING
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
23 3/4"
21"
DOOR
OPENING
29"
22 1/2"
1 1/2"
69"
72"
EVAPORATOR
HOUSING
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
DOOR
OPENING
21"
23 3/4"
16 1/2"
29"
43 1/4"
16 1/2"
1 1/2"
93"
96"
EVAPORATOR
HOUSING
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
DOOR
OPENING
21"
23 3/4"
29"
29"
24"
21"
24 3/4"
20 3/4"
EVAPORATOR
HOUSING
180
SWING
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
48"
6"
4 1/2" 4 1/2"
2 3/8"
22 1/2"
25 1/4"22 3/4"
25 1/4"
STANDARD CABINET
WITH OPTIONAL 6" LEGS
  • Page 1 1
  • Page 2 2

Glastender LP48 Datasheet

Glastender
Brand
Glastender
Model
LP48
Type
Datasheet
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers