Lifetime 80193 Owner's manual

Brand: Lifetime

Model: 80193

Type: Owner's manual

Lifetime 80193

The Lifetime 80193 is a heavy-duty table cart designed to hold and transport up to eight 5' or 6' round tables or approximately twelve (12) rectangular tables. It features a sturdy steel frame with a powder-coated finish for durability and resistance to rust and corrosion. The cart has four swivel casters for easy maneuverability, and the two front casters are lockable to keep the cart in place when needed. Assembly is required, but the cart can be assembled in minutes with the included hardware and easy-to-follow instructions.

Here are some of the key features and benefits of the Lifetime 80193 table cart:

Lifetime 80193

Here are some of the key features and benefits of the Lifetime 80193 table cart:

Keep this Identiﬁcation Number in case you must contact our Customer Service Department.

MODEL N° 80193

OWNER’S MANUAL

Copy

LIFETIME’S PROMISE TO YOU:

We invite you to read our privacy policy at www.lifetime.com

There are beneﬁ ts to registering your Lifetime product. With our new online product registration form, it’s fast and easy! Register with us at www.lifetime.com

and enjoy these great beneﬁ ts:

s2ECEIVEEXCLUSIVEMONEYSAVINGOFFERSFROM"UY,IFETIMECOMOURONLINESTOREASWELLAS.%7PRODUCTNOTIlCATIONSANDSPECIALCLOSEOUT

PROMOTIONS

s)NTHEUNLIKELYEVENTOFAPRODUCTRECALLORSAFETYMODIlCATIONWEWILLNOTIFYYOU

s2EGISTERINGYOURPRODUCTGUARANTEESYOUWARRANTYSERVICE)FYOUDONOTREGISTERYOURPRODUCTYOURWARRANTYRIGHTSWILLNOTBEDIMINISHED

"UTYOUWILLNEEDTOPROVIDEASALESRECEIPTTOVERIFYYOURPRODUCTPURCHASEDATEBEFOREWARRANTYSERVICEWILLBEPROVIDED

Maintaining your privacy is our long-standing policy at Lifetime. And you can rest assured that Lifetime will not sell or provide your

personal data to other third parties, or allow them to use your personal data for their own purposes.

&ORCUSTOMERSOUTSIDETHE53OR#ANADAPLEASECONTACTTHESTOREFORASSISTANCE

**U.S. and Canada customers ONLY**

)&!33)34!.#%)3.%%$%$

DO NOT CONTACT THE STORE!

CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 (800) 225-3865

(/523AMTOPM-ONDAYTHROUGH&RIDAY-OUNTAIN3TANDARD4IME

#ALLORVISITOUR7EBSITEFOR3ATURDAYHOURS

Most injuries are caused by misuse and/or not following instructions. Use caution when using this system.

4OENSURESAFETYDONOTATTEMPTTOASSEMBLETHISPRODUCTWITHOUTFOLLOWINGTHEINSTRUCTIONSCAREFULLY#HECKENTIREBOXANDINSIDEALLPACKING

MATERIALFORPARTSANDORADDITIONALINSTRUCTIONMATERIAL"EFOREBEGINNINGASSEMBLYREADTHEINSTRUCTIONSANDIDENTIFYPARTSUSINGTHEHARDWARE

IDENTIlERANDPARTSLISTINTHISDOCUMENT0ROPERANDCOMPLETEASSEMBLYUSEANDSUPERVISIONAREESSENTIALTOREDUCETHERISKOFACCIDENTOR

INJURY!HIGHPROBABILITYOFSERIOUSINJURYEXISTSIFTHISSYSTEMISNOTINSTALLEDMAINTAINEDANDOROPERATEDPROPERLY

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY

DAMAGE AND WILL VOID WARRANTY.

s4WOCAPABLEADULTSARERECOMMENDEDFORASSEMBLY

s&OLLOWANYANDALLWARNINGSANDCAUTIONSCAREFULLY

s!SSEMBLEONLEVELGROUND

s#HECKALLNUTSANDSCREWSFORTIGHTNESSBEFOREANDDURINGTHEUSAGESEASON

SAFETY INSTRUCTIONS

Instruction #1090127 5/12/2011

Copy

7/16” Wrench 1/2” Wrench Rubber Mallet

Safety Glasses

TOOLS REQUIRED FOR THIS ASSEMBLY

*TWO ADULTS RECOMMENDED TO

COMPLETE ASSEMBLY*

BEFORE BEGINNING ASSEMBLY

Keep the hardware bags and their contents separate. If any parts are missing, call our Customer Service

Department.



  

PAIRFOREACHPERSON

This area is located at the top, left-hand

corner of the page and indicates which tools

and hardware are needed to complete the

assembly steps on a page.

This area is located at the top, right-hand

corner of the page and shows an image of the

product with shaded parts indicating which

section is being assembled.

SEC

Note:

Refer to the following areas throughout the instructions

to assist in the assembly process:

This area is usually located in the bottom,

left-hand corner of a step and indicates that

special attention is needed to perform a

particular part of a step.

These areas are usually located in the bottom,

right-hand corner of a step and indicate that

damage to the product or serious injury may

occur if the caution or warning is not heeded.

Throughout the Parts & Hardware List, Part

& Hardware Identiﬁ ers, and instructions

are three-letter IDs. These IDs are below

the images of the parts and hardware to

help you locate and identify the parts and

hardware during assembly. These IDs are not

necessarily on the parts themselves.

WARNING

ASSEMBLY GUIDE

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

CAUTION

ADZX

vXv0AN(EAD3CREW

PARTS LIST

ID Item Description Qty

$!6 2EAR,EFT6ERTICAL3UPPORT 

$!7 2EAR2IGHT6ERTICAL3UPPORT 

$!/ &RONT,EFT6ERTICAL3UPPORT 

$!. &RONT2IGHT6ERTICAL3UPPORT 

$!2 ,EFT(ORIZONTAL3UPPORT 

$!3 2IGHT(ORIZONTAL3UPPORT 

$!0 (ORIZONTAL4UBE 

$!1 #ENTER6ERTICAL3UPPORT 

$!4 3HORT(ORIZONTAL3UPPORT 

$!) #ENTER4ABLE3UPPORT 

$!5 #ART(ANDLE 

$!, &RONT4ABLE3UPPORT 

$!8 2EAR4ABLE3UPPORT 

$!+ &RONT#ASTOR 

$!* 2EAR#ASTOR 

PART ILLUSTRATIONS

0ARTSILLUSTRATEDATOFACTUALSIZE

DAVX

2EAR,EFT6ERTICAL3UPPORT

DARX

,EFT(ORIZONTAL3UPPORT

DASX

2IGHT(ORIZONTAL3UPPORT

DAPX

(ORIZONTAL4UBE

DAWX

2EAR2IGHT6ERTICAL3UPPORT

DAOX

&RONT,EFT6ERTICAL3UPPORT

DANX

&RONT2IGHT6ERTICAL3UPPORT

PARTS IDENTIFIER

ID Item Description Qty

DAZ 80193 Table Cart Hardware Bag

$!! vXv"UTTON(EAD3CREW 

$!" vXv"UTTON(EAD3CREW 

$!# vXv"UTTON(EAD3CREW 

$!& vXv"UTTON(EAD3CREW 

$!% vXv"UTTON(EAD3CREW 

$!$ vXv"UTTON(EAD3CREW 

$!' v.YLOCK.UT 

$!( v.YLOCK.UT 

$"! v3TANDARD7ASHER 

$"" %ND#AP 

$"$ v!LLEN7RENCH 

##, v!LLEN7RENCH 

PART ILLUSTRATIONS (CONT.)

0ARTSILLUSTRATEDATOFACTUALSIZE

80193 TABLE CART HARDWARE BAG [DAZ]

(ARDWAREILLUSTRATEDATACTUALSIZE

PARTS IDENTIFIER

HARDWARE IDENTIFIER

DAIX

#ENTER4ABLE3UPPORT

DAAX

vXv"UTTON(EAD3CREW

DAFX

vXv"UTTON(EAD3CREW

DAGX

v.YLOCK.UT

DBDX

v!LLEN7RENCH

CCLX

v!LLEN7RENCH

DABX

vXv"UTTON(EAD3CREW

DAEX

vXv"UTTON(EAD3CREW

DAHX

v.YLOCK.UT

DBAX

v3TANDARD7ASHER

DADX

vXv"UTTON(EAD3CREW

DACX

vXv"UTTON(EAD3CREW

DALX

&RONT4ABLE3UPPORT

DAUX

#ART(ANDLE

DAJX

2EAR#ASTOR

DAXX

2EAR4ABLE3UPPORT

DAKX

&RONT#ASTOR

DAQX

#ENTER6ERTICAL3UPPORT

DATX

3HORT(ORIZONTAL3UPPORT

DBBX

0LASTIC%ND#AP

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

1.1

#ONNECTAShort Horizontal Support (DAT) and Cart Handle (DAU)TOTHELeft and Right Rear Vertical Supports (DAV and DAW)

ASSHOWNUSINGTHEREQUIREDHARDWAREDo not completely tighten Screws.

5/32”

DBAX

DACX

DAC

DAU

DAT

DAW

DAV

DAC

DBA

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

1.2

#ONNECTTHESECONDShort Horizontal Support (DAT)TOTHELeft and Right Front Vertical Supports (DAO and DAN)ASSHOWN

USINGTHEREQUIREDHARDWAREDo not completely tighten Nuts until instructed.

Note the positions of

the holes.

DAT

DAO

DAN

DABX

DAB

DAG

DAGX

3/16”

1/2”

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

These four holes go

toward the rear.

These four holes go

toward the rear.

#ONNECTTHE&RONTAND2EAR!SSEMBLIESTOTHELeft and Right Side Horizontal Supports (DAR and DAS)USINGTHE

REQUIREDHARDWARECompletely tighten all Nuts.

SEC

1.3

DABX

DAB

DAA

DAR

DAS

DAGX

DAG

DAAX

3/16”

1/2”

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

1.4

,AYTHE!SSEMBLYONITSSIDEANDCONNECTTHETWOCenter Vertical Supports (DAQ)TOTHE,EFTAND2IGHT3IDE(ORIZONTAL

3UPPORTSUSINGTHEREQUIREDHARDWARECompletely tighten this hardware.

DAFX

DAF

DAQ

5/32”

7/16”

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

1.5

#ONNECTTHETWOHorizontal Support Tubes (DAP)TOTHE&RONTAND2EAR6ERTICAL3UPPORTSUSINGTHEREQUIRED

HARDWARE4HENCONNECTTHE(ORIZONTAL3UPPORT4UBESTOTHE#ENTER6ERTICAL3UPPORTSUSINGTHEREQUIRED

HARDWAREDo not completely tighten Nuts until instructed.

5/32”

DBAX

DACX

DAC

DAEX

DBA

DAE

DBA

DAP

DAHX

DAH

7/16”

Note: You will need to gently pull out on the Left and Right Front

Vertical Supports to insert the Horizontal Support Tubes (DAP).

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

1.6

#AREFULLYTURNTHE&RAMEUPSIDEDOWN3LIDEACenter Table Support (DAI)UPINTOPLACEASSHOWN3ECURETHE#ENTER

4ABLE3UPPORTTOTHE&RAMEUSINGTHEREQUIREDHARDWAREDo not completely tighten Nuts until instructed.

RearFront

DAI

DAAX

DAA

DAGX

3/16”

1/2”

Note: For 6’ round tables, attach the Center

Table Supports using these holes.

Note: For 5’ round tables, attach the Center

Table Supports using these holes.

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

Front Rear

SEC

1.7

3LIDETHESECONDCenter Table Support (DAI)UPINTOPLACEASSHOWN3ECURETHE#ENTER4ABLE3UPPORTTOTHE&RAME

USINGTHEREQUIREDHARDWAREDo not completely tighten Nuts until instructed.

DAI

DAAX

DAA

DAGX

DAG

3/16”

1/2”

Note: For 6’ round tables, attach the Center

Table Supports using these holes.

Note: For 5’ round tables, attach the Center

Table Supports using these holes.

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

1.8

3LIDETHEFront Table Support (DAL)UPINTOPLACEASSHOWN3ECURETHE&RONT4ABLE3UPPORTTOTHE&RAMEUSINGTHE

REQUIREDHARDWAREDo not completely tighten Nuts until instructed.

DAL

DAGX

DAG

DABX

DAB

3/16”

1/2”

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

1.9

3LIDETHERear Table Support (DAX)UPINTOPLACEASSHOWN3ECURETHE2EAR4ABLE3UPPORTTOTHE&RAMEUSINGTHE

REQUIREDHARDWARECompletely tighten all hardware.

DAX

DAGX

DAG

DABX

DAAX

DAA

DAB

3/16”

1/2”

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE

SEC

1.11

4URNTHE4ABLE#ARTRIGHTSIDEUPANDINSERTTHEFOUREnd Caps (DBB)INTOTHEFOUR&RONTAND2EAR6ERTICAL3UPPORTS

ASSHOWN

SEC

1.10

#ONNECTTHEFront and Rear Castors (DAK and DAJ)TOTHEFRAMEASSHOWNUSINGTHEREQUIREDHARDWAREComplete tighten

these Screws.

DAJ

DBB

DAJ

DAK

DADX

DBBX

5/32”

Note: The Table Cart will hold eight (8) 5’ or 6’ round

tables or approximately twelve (12) rectangular tables.

#ONGRATULATIONSONYOUR,IFETIME

PRODUCTPURCHASE"YFOLLOWINGTHEINSTRUCTIONSBELOWYOURNEW,IFETIMEPRODUCTSHOULD

PROVIDEYOUWITHYEARSOFSERVICEANDENJOYMENT

Cleaning and Care

#LEANWITHANONABRASIVECLEANINGSOLUTIONANDSOFTBRISTLEDBRUSH!BRASIVECLEANINGMATERIALSMAYSCRATCHTHEPOWDER

COATINGANDARENOTRECOMMENDED2EPAIRSCRATCHESORRUSTSPOTSONTHEMETALBYSANDINGTHEAFFECTEDAREALIGHTLYUSINGA

RUSTPREVENTATIVESPRAYPRIMERANDlNALLYSPRAYINGWITHAMATCHINGHIGHGLOSSSPRAYENAMELPAINT

CLEANING & CARE

LIFETIME

1-YEAR LIMITED FACTORY WARRANTY

LIFETIME

PRODUCTS, INC. RESERVES THE RIGHT TO MAKE SUBSTITUTIONS TO WARRANTY CLAIMS IF PARTS ARE UNAVAILABLE

OR OBSOLETE.

,IFETIME

4ABLE#ARTSAREWARRANTEDTOTHEORIGINALPURCHASERTOBEFREEFROMDEFECTSINMATERIALORWORKMANSHIP

FORAPERIODOFONEYEARFROMTHEDATEOFORIGINALRETAILPURCHASE4HEWORDhDEFECTSvISDElNEDASIMPERFECTIONS

THATIMPAIRTHEUSEOFTHEPRODUCT$EFECTSRESULTINGFROMMISUSEABUSEORCUSTOMERNEGLIGENCEWILLVOIDTHIS

WARRANTY4HISWARRANTYDOESNOTCOVERDEFECTSDUETOALTERATIONOFACCIDENT4HISWARRANTYDOESNOTCOVERDAMAGE

CAUSEDBYVANDALISMRUSTINGhACTSOFNATUREvORANYOTHEREVENTBEYONDTHECONTROLOFTHEMANUFACTURER

4HISWARRANTYISNONTRANSFERABLEANDISEXPRESSLYLIMITEDTOTHEREPAIRORREPLACEMENTOFDEFECTIVEPRODUCT)F

THEPRODUCTISDEFECTIVEWITHINTHETERMSOFTHISWARRANTY,IFETIME

0RODUCTS)NCWILLREPAIRORREPLACEDEFECTIVE

PARTSATNOCOSTTOTHEPURCHASER3HIPPINGCHARGESARENOTCOVEREDANDARETHERESPONSIBILITYOFTHEPURCHASER

4HISWARRANTYDOESNOTCOVERSCRATCHINGSCUFlNGOROTHERCOSMETICDAMAGETHATMAYRESULTFROMNORMALUSE

OFTHEPRODUCT)NADDITIONDEFECTSRESULTINGFROMINTENTIONALDAMAGECUSTOMERNEGLIGENCEORUNREASONABLEUSE

WILLVOIDTHISWARRANTY

,IABILITYFORINCIDENTALORCONSEQUENTIALDAMAGESISEXCLUDEDTOTHEEXTENTPERMITTEDBYLAW7HILEEVERYATTEMPT

ISMADETOEMBODYTHEHIGHESTDEGREEOFSAFETYINALLPRODUCTSFREEDOMFROMINJURYCANNOTBEGUARANTEED4HE

USERASSUMESALLRISKOFINJURYRESULTINGFROMTHEUSEOFTHISPRODUCT!LLMERCHANDISEISSOLDONTHISCONDITION

ANDNOREPRESENTATIVEOFTHECOMPANYMAYWAIVEORCHANGETHISPOLICY

4HISWARRANTYISINLIEUOFALLOTHERWARRANTIESEXPRESSEDORIMPLIEDINCLUDINGWARRANTIESOFMERCHANTABILITY

OR lTNESSFOR USE TO THE EXTENT PERMITTED BY &EDERAL AND STATE LAW  .EITHER ,IFETIME

 0RODUCTS )NC NOR ANY

REPRESENTATIVEASSUMESANYOTHERLIABILITYINCONNECTIONWITHTHISPRODUCT4HISWARRANTYGIVESYOUSPECIlCLEGAL

RIGHTSANDYOUMAYALSOHAVEOTHERRIGHTSWHICHVARYFROMSTATETOSTATE

PLEASE INCLUDE YOUR DATED SALES RECEIPT AND PHOTOGRAPHS OF DAMAGED PARTS.

2%0/2402/$5#4$%&%#43).72)4).'4/

,IFETIME0RODUCTS)NC0/"OX#LEARlELD54

ORCALL-&AMTOPM-34

Lifetime

Products, Inc.

6ISITWWWLIFETIMECOMORCALLTOREGISTERYOURPRODUCTTODAY

FOR INTERNATIONAL WARRANTY CLAIMS:

!LLWARRANTYCLAIMSMUSTBEACCOMPANIEDBYASALESRECEIPT2EPORTALLWARRANTYCLAIMSINWRITINGTOYOUR

REGIONALSALESSUPPORTREPRESENTATIVE0LEASEINCLUDEYOURDATEDSALESRECEIPTANDPHOTOGRAPHSOFDAMAGED

PARTS

4O)DENTIFYTHEREPRESENTATIVEFORYOURREGION0LEASEVISITWWWLIFETIMECOMINTERNATIONAL

Lifetime 80193 Owner's manual

Brand: Lifetime

Model: 80193

Type: Owner's manual

Lifetime 80193

Here are some of the key features and benefits of the Lifetime 80193 table cart:

Download PDF

report

Lifetime 80193 Owner's manual

Lifetime 80193 Owner's manual

Related papers

Other documents