Adding distilled water to your Basement Watchdog
battery is quick and easy.
1. Unscrew the cap of the bottle, add distilled
water and screw the cap back onto the
bottle. Never
add acid to the battery by
using this bottle.
2. Remove the battery caps of the battery (see
instructions within your system manual )
3. Press the nozzle of the bottle into each cell.
The flow of water stops automatically when
the cell is filled to the correct height.
For information or service contact
Glentronics,
Inc.
645 Heathrow Drive
Lincolnshire IL 60069
800-991-0466
www.basementwatchdog.com